honey12:
pls gurus in the house, will my old srt 4669x decoder still get signal. I have abandoned it for a long time. pls help a sister

Provided it was working fine before you abandoned it.. Definitely it will Still have the ability to receive signal, when connected to a dish that has an active signal. I believe you will be needing the services of an installer to set it up for you. So it will be best to still ask the installer to open the back cover and clean up the panel inside with brush. The installer can also go further to use fuel to do such, if he noticed any rust by the surface of the component inside and place it under the sun to dry up. All the listed is only necessary if the decoder was abandoned in a very dusty or moist area. However if such is not the case, then, no need for all that. Good luck

ipobWARLORD:

What's you advice for me, should I go for csat c8 pro or this csat 2200hd. Which one should I go for

Csat c8 pro+

dlollyboi:

Csat c8 pro+

Thanks

dlollyboi:
Csat c8 pro+

Please can you direct me on how to put biss on this decoder? Thanks.

ipobWARLORD:

What's you advice for me, should I go for csat c8 pro or this csat 2200hd. Which one should I go for

my bro it all depend in your Puckett and ur targeted satellite channels to view

Good evening my great people in the house. It has been a while

Good evening my great people in the house. It has been a while

No

Spy360:

Please can you direct me on how to put biss on this decoder? Thanks.

whatsapp me on 08060150782 to bail you out. It requires a software which you will need to download. It is easier for me to send it via WhatsApp

Michaelondon53:
Hello house members, do I need to activate biss key for idman TV for me to watch during live matches? Because it comes up sometimes during live matches and most times it just appears blank. I use a mediastar 2727. If yes, how do I go about it? I meant how do I go to the biss key page and how do I Input the keys and also how do I activate it.. Kindly give me step by step guide for mediastar decoder. Thanks, Awaiting your kind response .

#michaelondon53

No. At times the channel can be blank

Hello house, has any one used the G-M Screen app on medistar 2727? I had that it has the ability to carry out casting functions on TV.. Is I TV possible to cast ur phone screen on TV and also watch different FTA channels that are on the same frequency via mobile phones?

Spy360:

Please can you direct me on how to put biss on this decoder? Thanks.

Press 9878 to enable patch

Michaelondon53:
Hello house, has any one used the G-M Screen app on medistar 2727? I had that it has the ability to carry out casting functions on TV.. Is I TV possible to cast ur phone screen on TV and also watch different FTA channels that are on the same frequency via mobile phones?

I have used G-M Screen on mediastar 2727, it does not cast phone on screen.

It has dvb finder though.

philipbash:
No whatsapp me on 08060150782 to bail you out. It requires a software which you will need to download. It is easier for me to send it via WhatsApp

please can I whatsapp you for the software too. thanks

dlollyboi:

Press 9878 to enable patch

I have done so and even tried entering key but no success.

Spy360:

I have done so and even tried entering key but no success.

https://mega.nz/file/W9omUKwZ#qAgl9HCujfL8kzr0Eoem2bADoeA_h7FGyKZBnBReVc8
That's user settings. Download and flash it
Select 'user' when you want to flash.

Spy360:

I have done so and even tried entering key but no success.

You can also import the softcam key I uploaded. During live match, factory reset and rescan, it will open. Then you can backup the user database so you don't have to factory reset all the time.

showietee:


I have used G-M Screen on mediastar 2727, it does not cast phone on screen.

It has dvb finder though.

Does the voice remote control work? I mean the voice recognition. Mine is not working, it says I should enable microphone which I did but it's still not following to instructions.

showietee:


I have used G-M Screen on mediastar 2727, it does not cast phone on screen.

It has dvb finder though.

Does the voice remote control work? I mean the voice recognition. Mine is not working, it says I should enable microphone which I did but it's still not following to instructions.

dlollyboi:

https://mega.nz/file/W9omUKwZ#qAgl9HCujfL8kzr0Eoem2bADoeA_h7FGyKZBnBReVc8
That's user settings. Download and flash it
Select 'user' when you want to flash.

Thanks. How do I flash please? Should I install in flash drive and upload to decoder?

Spy360:

Thanks. How do I flash please? Should I install in flash drive and upload to decoder?

Copy what you downloaded in the root directory of flash drive, go to 'usb update' and select user dB, the .bin file you downloaded will show then select 'start'

philipbash:
No. At times the channel can be blank

I hail you sir. My testimony.

dlollyboi:

Copy what you downloaded in the root directory of flash drive, go to 'usb update' and select user dB, the .bin file you downloaded will show then select 'start'

Thanks boss.

Michaelondon53:

Does the voice remote control work? I mean the voice recognition. Mine is not working, it says I should enable microphone which I did but it's still not following to instructions.

I never tried the voice control, so, I will not be to give feedback on that.

Spy360:

Thanks boss.

UPDATE US HOW IT WENT

dlollyboi:

Copy what you downloaded in the root directory of flash drive, go to 'usb update' and select user dB, the .bin file you downloaded will show then select 'start'

IS IT AFTER THIS THEN ANOTHER PROCESS FOR SOFTCAM.KEY

please guy's what best decoder to buy with best options I don't mind any amount

Xmen149:


IS IT AFTER THIS THEN ANOTHER PROCESS FOR SOFTCAM.KEY

You can use either process, they are two separate procedure

lateefykn84:
please guy's what best decoder to buy with best options I don't mind any amount

What dish size do you have

dlollyboi:

What dish size do you have

for now 90cm but I'm plan to upgrade to 2.8m to 3m

lateefykn84:
for now 90cm but I'm plan to upgrade to 2.8m to 3m

Buy forever enabled STB like octopus 4k, Tiger T3000 Z280+ I400PRO Z400PRO Z4000
Or orca enabled STB like icone iron pro
If you in SW Nigeria it's better u go for a 4.5m fibre dish to enjoy the device

lala5yuru:
please can I whatsapp you for the software too. thanks

please go ahead

dlollyboi:

You can use either process, they are two separate procedure

What is the procedure to upgraded the SOFTCAM.KEY bro sir
I have tired it but it not working