Carmy 2002 rpm is always low or flat low whenever the .ac is on...
I have already serviced the throttle body/sensor...
Cleaned the air filter
Changed the throttle pedal sensor
Still the problem persist.. especially when the car is at running temperature...
Pls..any advice to this problem

You didn't mention if you scanned the car

boldx:
You didn't mention if you scanned the car

Good question

boldx:
You didn't mention if you scanned the car

I will scan it tomorrow.. hopefully

After the scan...it's showing POO37
POO31
Any advice brothers

Ugoc3:
After the scan...it's showing POO37
POO31
Any advice brothers

Just Google the error codes.

Ugoc3:
Carmy 2002 rpm is always low or flat low whenever the .ac is on...
I have already serviced the throttle body/sensor...
Cleaned the air filter
Changed the throttle pedal sensor
Still the problem persist.. especially when the car is at running temperature...
Pls..any advice to this problem

Is it the big daddy or drop light?
If drop light, it can be adjusted manually. Tell your mech yo adjust

Dozieson:


Is it the big daddy or drop light?
If drop light, it can be adjusted manually. Tell your mech yo adjust

Na big daddy bro

Ugoc3:


Na big daddy bro

Is there ABS on your car? Is it working ? Normally, for big daddy the car will relearn to get the right rpm if battery head is removed.

Why don't you change the air filter?

Dozieson:


Is there ABS on your car? Is it working ? Normally, for big daddy the car will relearn to get the right rpm if battery head is removed.

Why don't you change the air filter?

Boss, I have low rpm and I’ve removed the battery head even clean the throttle body but still same thing. No error codes Camry 2006 i4. What can I check again and I don’t want Kazeems to scatter my engine for me.

Dozieson:


Is there ABS on your car? Is it working ? Normally, for big daddy the car will relearn to get the right rpm if battery head is removed.

Why don't you change the air filter?

Brotherly..I don do all the above and more ...still no improvement

Ugoc3:


Brotherly..I don do all the above and more ...still no improvement

Is your AbS working?

Dozieson:


Is your AbS working?

Bro..abs..na anti braking system!!
How abs take consign low rpm

Yes the abs de work

Ugoc3:


Bro..abs..na anti braking system!!
How abs take consign low rpm

Yes the abs de work

I had same issue with my 2005 Camry last year. After scanning ABS was bad and air filter dirty. After replacing both and cleaning the throthle body, RPM has been stabilized till date. it stabilizes @ 800

as someone stated below, there could be vacuum leaks

Check and clean your idle air control valve IAC also check for vacuum leaks

benefitzte:
Check and clean your idle air control valve IAC also check for vacuum leaks

I have done this.. still no positive outcome

Dozieson:


I had same issue with my 2005 Camry last year. After scanning ABS was bad and air filter dirty. After replacing both and cleaning the throthle body, RPM has been stabilized till date. it stabilizes @ 800

as someone stated below, there could be vacuum leaks

Ok..I will try it out

Bros go to ur mechanic,tell him to clean your injector and you will be fine.Had d same issue with my 2003 Camry some time back

Ugoc3:


Ok..I will try it out

Again, is your AC compressor manual or auto?

Dozieson:


Again, is your AC compressor manual or auto?

Manual compressor

Ugoc3:


Manual compressor

We are getting there. Go read about manual compressor. Search for manual compressor here on nairaland. The manual compressor is one of the reason your rpm is going low. It makes the rpm unstable. The right compressor should be auto

Dozieson:


We are getting there. Go read about manual compressor. Search for manual compressor here on nairaland. The manual compressor is one of the reason your rpm is going low. It makes the rpm unstable. The right compressor should be auto

Ok bro.. blessings for the update
I will buy the auto soonest

Ugoc3:
Carmy 2002 rpm is always low or flat low whenever the .ac is on...
I have already serviced the throttle body/sensor...
Cleaned the air filter
Changed the throttle pedal sensor
Still the problem persist.. especially when the car is at running temperature...
Pls..any advice to this problem

I have same prob. my RPM is below 800 and doesn’t make my AC to chill, at cold start it works fine but when engine warms up the RPM drops to 500
Were you able to fix yours ?
I need help please
Note: I’ve checked wit anothe throttle body, throttle position. Sensor and even tried another brainbox but it’s still same low RPM
I NEED HELP PLEASE
ITS Camry 2003 V6

Your engine is coming to an end. Normal rpm supposed to be between 900 and 1300rpm. If it starts vibrating at 900. Ypur engine compression is low and
Coming to Ann end. Sell the engine and buy soleh engine.direct toks

Henray02:


I have same prob. my RPM is below 800 and doesn’t make my AC to chill, at cold start it works fine but when engine warms up the RPM drops to 500
Were you able to fix yours ?
I need help please
Note: I’ve checked wit anothe throttle body, throttle position. Sensor and even tried another brainbox but it’s still same low RPM
I NEED HELP PLEASE
ITS Camry 2003 V6

[quote author=Worldwyde post=119299584]Your engine is coming to an end. Normal rpm supposed to be between 900 and 1300rpm. If it starts vibrating at 900. Ypur engine compression is low and
Coming to Ann end. Sell the engine and buy soleh engine.direct toks[/quote
It’s a toks engine
Changed it 3 months ago
It drives well and picks up when I accelerate. Only problem is low RPM

[quote author=Henray02 post=119300225][/quote]

It doesn’t vibrate at all, only hesitate a lil when I step on gas . I have one faulty abs sensor
It’s a toks engine.

Henray02:


I have same prob. my RPM is below 800 and doesn’t make my AC to chill, at cold start it works fine but when engine warms up the RPM drops to 500
Were you able to fix yours ?
I need help please
Note: I’ve checked wit anothe throttle body, throttle position. Sensor and even tried another brainbox but it’s still same low RPM
I NEED HELP PLEASE
ITS Camry 2003 V6

Show us your scan results

Worldwyde:
Your engine is coming to an end. Normal rpm supposed to be between 900 and 1300rpm. If it starts vibrating at 900. Ypur engine compression is low and
Coming to Ann end. Sell the engine and buy soleh engine.direct toks

I don't think so. Normal rpm with ac should be around 700 to 800 with no fluctuation. Most people are using the wrong compressor on their cars. But he should try and scan to know if there is a fault associated with it.

Henray02:


It doesn’t vibrate at all, only hesitate a lil when I step on gas . I have one faulty abs sensor
It’s a toks engine.

Faulty abs or faulty abs sensor? Where is the code?

Dozieson:


Faulty abs or faulty abs sensor? Where is the code?

Faulty abs sensor
The abs light is on and scan showed it’s faulty
Can it affect RPM?

Dozieson:


Show us your scan results

I left my Rewire shop alrdy
It was showing abs sensor
Catalyst one and two
And engine switch

Henray02:

I left my Rewire shop alrdy
It was showing abs sensor
Catalyst one and two
And engine switch

Those code would have been better than the description above. Why not get a small Bluetooth scanner for self diagnosis?

A failed abs can cause your car to drag from a take off point but smooth while on top speed