Vibrating screen is the main equipment to separate solid materials. It is widely used in mineral, building materials, coal dressing, energy and chemical industry. According to different functions and structures, vibrating screen covers a wide range of types. Frequently used one is circular vibrating feeder. In this article, we will introduce a new type vibrating feeder, emphasizing on its installation.

The first is the installation of electromagnetic vibrating feeder. It can be directly mounted in the working position according to the dimensions given installation diagram without disassembly. Before installation, you must check the various parts of the vibrator screws fastening. Tank with coupling fork join screw and tighten them one by one. The top of the plate spring screws must be re- tightened before installation, or may affect feeder vibration tuning value. The core and the armature air gap should be checked and adjusted to 1.8 ~ 2.1mm, the core and the armature plane is to be maintained paralleled and cleanly, and then tighten the adjusting bolt and the fixing bolt of the core holder individually. Coil of plywood bolt should be tightened to prevent the coil loose. To make the machine work stable, material handling must be accurate, vibrator exciting force direction must go through the center of gravity of tank.

Feeder boom uses wire rope, which should be sufficient to support the framework of the boom, if has architecture beating, it will affect the normal work of the feeder. The boom along the longitudinal direction of the feeder should be vertical, while the width direction of the boom may each be outwardly inclined 10°. Feed and discharge chute fitted tank feeder should leave some swimming gap, generally take about 25ram. Feed and out-feed chute must not collide with the feeder, so as not to affect the feeder vibration and make noise.

When the feeder is installed to a given location, we should check whether the transverse direction is on the tank level, otherwise it will offset the materials to one side in the course of transmission. Feeder body and control box casing shall be conducted in accordance with the rules to make ground protection. If electromagnetic feeder has been installed, you should lose the vibrator casing on the lower sides, otherwise it will prejudice feeder vibration.

This article is provided by Zoneding Machine (Zhengzhou Zhongding Heavy Duty Machine Manufacturing Co., Ltd). Zoneding Machine is one of the leading mining equipments manufacturers in China. We can provide single pieces like ball mill, crushers, conveyors, screeners, flotation machine, magnetic separators as well as standard set of equipments such as aggregate crushing plant, sand making plant, industrial grinding plant and beneficiation plant including combination beneficiation plant, flotation beneficiation plant, gravity beneficiation plant and magnetic beneficiation plant.