lanre2009:

Mine did same....but after rebooting the decoder couple of times it is now showing, watching MAN CITY VS LIVERPOOL on SNW

so rebooting is d solution. I will try it

Hello guys,

How do I get SNW? Using 13G

I'm really enjoying MCI vs LIV without any freeze

To get SNW go to satellite E36A and then press blue bottom scan auto scan all channel and save after it finish scanning. You can then check SNW

Fire down.

jahstech:

"HD"MI is for HD channels, if you don't have HDMI cable you can watch and enjoy HD channels, guy you can't compare HDMI cable with your normal 3 pin cable, when you watch HD channels with HDMI no body go tell you, but for now I don't think any of the HD channels is working on the Queen.

HDMI cable not just for HD channels sir. Please connect it to watch your SD channels too.
Picture quality always infinitely better.
By the way, 3 pin cables are so "old school".
Who uses them these days?

#wemovedon....

Noah13: My decoder gave me a scare this evening, after it had me thinking something had gone wrong with the crystal oscillator when it displayed load and didn't boot afterwards.

What i had to do was remove it from the power outlet and i opened the covering so it could receive some air.

That was when i understood that overheating is potential danger for the queen.

My adivice, always make sure to leave the queen in a cool environment and always unplug your 3g modem or any other storage device when not in use.

My 3g modem has never left the port of my queen since the day I bought it over a year ago and I have not had any fault with the decoder. In fact I currently have a Wi-Fi adapter plugged at the rear port while the modem is plugged at the front port and I don't remove them No issues so far

Am using Q13g...the two usb ports work with my modem for a while and stop....am tired....it is well ventilated and alwas cool....wat culd be d problem?...am in abuja...who is an enginer dat can asist? I tink it is hardware problm...pls help

macbeyland: My 3g modem has never left the port of my queen since the day I bought it over a year ago and I have not had any fault with the decoder. In fact I currently have a Wi-Fi adapter plugged at the rear port while the modem is plugged at the front port and I don't remove them No issues so far

I advice you to correct this now that your decoder hasn't developed any fault. Don't wait till when it starts and then come here with stories like 'my decoder only displays load and doesn't boot'. If this happens you either get a new box or a qualified engineer to remedy the issue.

can someone tell me if an airtel modem can work? If there re any settings to change

Morning peeps. pls confirm your codes are up and running this morning

jujukemist: Morning peeps. pls confirm your codes are up and running this morning

Na wa o

Bonchico: can someone tell me if an airtel modem can work? If there re any settings to change

it can work. someone be kind enough to help with the settings. I no carry am for head.

jujukemist: Morning peeps. pls confirm your codes are up and running this morning

as at 6:45 it's up and running well.

To all those who will like to unlock their 3g modem(s), please follow the instructions from the site below, i used it to unlock my mtn 3g modem and now it works with all networks:

http://www.justnaira.com/2013/11/unlock-huawei-e303-modems-for-free.html

N.B:- The website is not mine and i am not a blogger. Thanks.

After going thru d**v channels on d**v decoder, I realise that the french stations are not included. So even if u pay full bouquet, u r expected to have them. Queen thank u oooo.

sgbola1: as at 6:45 it's up and running well.

Thanks Man mine is down. I will trouble shoot now

Trouble shooting successful!
Remove mtn sim>check data status.....good.
Then unplug code 58 from power source, insert sim back, power back code 58....waiting.... connection success.. good.2secs 3secs 5secs bam...connect to server..... bam Channels dailysunriseshow

jujukemist: Trouble shooting successful!
Remove mtn sim>check data status.....good.
Then unplug code 58 from power source, insert sim back, power back code 58....waiting.... connection success.. good.2secs 3secs 5secs bam...connect to server..... bam Channels dailysunriseshow

hmmmmm... what a trouble shooting

Please can someone guide me on how to get joy TV on my Q23G. Thanks in advance.

Iobserve that snw no sharp like s3 . check n see

tola73: To get SNW go to satellite E36A and then press blue bottom scan auto scan all channel and save after it finish scanning. You can then check SNW

[color=#000099][/coliixor]
Hey x. Ctgoof cdcftf vfggo :fg,dcd. Vyuh5 ggv) get o

Wasup wit d snw channel. Neva knew it was a sport channel o. Is it like xx3?

To the gurus in d house,

must the dns be 8.8.8.8?

Some1 on facbuk said it must.....wats is dns?.....

Am using Qsat11 and is not showing but show connection success pls help outout

jujukemist: Trouble shooting successful!
Remove mtn sim>check data status.....good.
Then unplug code 58 from power source, insert sim back, power back code 58....waiting.... connection success.. good.2secs 3secs 5secs bam...connect to server..... bam Channels dailysunriseshow

i wish etisalat is back...it is d only strong 3g ntwrk in my area....*sad*....mtn and co are notin to write home about.....am sure a lot of pipu are in my shoes. dongle!!!!!!!!

olowodaddy: Please can someone guide me on how to get joy TV on my Q23G. Thanks in advance.

You will need to add another LNB to your decoder, you can contact MALIX, he would help you sort it out, he helped with mine.....Cheers!!!

lanre2009:

You will need to add another LNB to your decoder, you can contact MALIX, he would help you sort it out, he helped with mine.....Cheers!!!

. Thanks

Please can someone give my mytv tp

xup guyz my q11g stop showing dis morning. Am using mtn. Any advice

toscotech: Please can someone give my mytv tp

12525/27500/V

AyodejiMdot: xup guyz my q11g stop showing dis morning. Am using mtn. Any advice

. Trouble shoot the decoder by removing the plug directly from the socket and plug it back.