How To Flash Your Nokia Phone Through USB

A lot of people often hear about “flashing mobile phones” without
knowing what it actually means.

Flashing a phone means re-
installing the phone’s firmware files, that is, re-installing the
operating system of the phone. When a phone’s operating
system files are corrupt due to incompatible applications, virus
attack and so on, flashing might be the only solution when restoring factory settings doesn’t work. Apart from this, flashing a
phone too can be used to update the firmware to a newer
version, install a cracked firmware, “wake” a dead phone, etc.

I have to emphasize that flashing a phone shouldn’t be done just
for fun as it might be useful and dangerous at the same time. Yes,
flashing a phone can wake a dead phone, so also flashing a working phone can kill it!

You should also note that flashing a contract phone such as
phones on T-mobile prepaid phone plans may not sit well with
your operator and make you lose any warranty you’re entitled to.

ALSO NOTE THAT THESE SOFTWARES
To flash your phone through usb, you need these:

i. Navifirm – to download the phone’s firmware
ii. Phoenix Service Suite
iii. Nokia PC Suite
iv. A good USB cable

1. Install Phoenix. This might take a pretty long time if you’re using
a slow computer but you’ve got to be patient

2. Run Navifirm but be sure to have a working internet connection before doing this. It connects to the internet and loads all available
Nokia phones firmwares. This too also takes a long time and
requires a steady internet connection so you need some patience here too.

3. Be sure your phone’s battery is charged to at least 50% though
flashing should take less than 10 minutes.

4. Select your phone type under Products. It is located on the
phone just beneath the battery. For example, N97′s product type
is RM-505, RM-133 for N73 and RM-596 for Nokia N8. (You can as
well check it by dialling *#0000# in standby.)

5. Wait till it loads Releases. From here, you can see all available
firmware versions. Select the latest you find there.

6. It now loads Variants, select your desired product code from
the list. You can also check beneath the battery to find the original product code.

7. Now select all the files and download. Select Download with
IDMM (Internet Download Manager) if you have it installed it on your PC. If not, select, Download with program and choose the destination folder.
8. Go to C:/Program Files/Nokia/Phoenix/Products
Create a folder with the name as your phone product type.

For example, for Nokia N97, the folder will be named RM-505
The firmware files you downloaded will then be located in C:/ Program Files/Nokia/Phoenix/Products/RM-505

9. Now run PHOENIX and connect your mobile phone in PC Suite
mode. If phoenix detects your phone automatically, skip steps
110-14.

10. In Phoenix, click File > Manage Connections > New.

11. Now select the type of cable you are using. If you are using
DKE-2, CA-53, Micro USB cable, select USB.

12. Click Next. It will find your product and say FOUND. If it doesn’t find any, you can try changing your cable type by clicking Back.

13. Click Next and then Finish.

14. Now your cable type (USB) appears in the connection list.
Select it. Click APPLY and then CLOSE.

15. Now select File > Open product.

16. A list of RM codes will open. Select your phone’s RM code.

17. Now select File > Scan Product.

18. Your phone’s firmware info will appear at the extreme bottom of the Phoenix Service Software window.

19. Now select Flashing > Firmware Update. At this point, Phoenix will automatically load the firmware files we talked about in step 8.
If it doesn’t, make sure you named that directory accordingly and
please go over step 8 again.

20. If everything up to step 20 goes well, select “Refurbish”, wait
until the “Successful” dialog box appear (DO NOT touch or
disconnect the phone or USB cable during the process). Press OK,
phone will disconnect and restart.
At the end Phoenix will tell you to disconnect your phone as the
flashing has finished butome phones may not boot up
automatically after the flashing has finished. In those cases,
remove the battery and then insert it and manually start the
phone.

Enjoy!!

plz do this at ur own risk.... flashinq phones is not a childs play

How To Hard Reset Nokia Lumia 635 Reset User Code By kingsman Mobile Repairing Institute
Nokia Lumia 635 Hard Reset Solution
Nokia Lumia 635 Reset Keys
How To Hard Reset Nokia Lumia 635
Nokia-Lumia-635-hard reset
Nokia Lumia 635 is Nokia’s Lumia 630 4G version .
Resetting is the same as the other models Lumia with Windows 8.You can use this method if you have problems with your software and you can not access its menu. Warning!It deletes all data from the phone memory after reset.
How To Hard Reset:
First step is to power off your phone.
Press the power button and immediately after the phone vibrates, press the volume down button until the display shows exclamation mark.
Click in this order, volume up, volume down, power button, volume down.
Wait until the phone restarts.
Done
How To Reset Nokia Lumia 635 , Hard Reset Keys For Nokia Lumia 635 , Remove User Code From Nokia Lumia 635

We also teach people how to flash all phones call +2348164409900, +2348130783878, +2347051301174
For more inquiries or visit http:///1pHMbTw