Small hammer crusher is well known for its portable and reliable performance,PC300*400 power source is 50 hertz and 380 volt,clients should install the three-phrase AC switch,make sure the distance is more than 3 meters away from the small hammer crusher.PC3040 Small hammer crusher hot sale for stone crushing plants in Australia. Check Small hammer crusher whether its fasten parts loose,as well as the abrasion of belt conveyor working condition. Do the commissioning for ten minutes and then start loading crushing when there is no problem.Great Wall stone crusher experts introduce the Small hammer crusher operation manual for us.
1,The feeding materials must abide to the technical parameters,such as max feeding size,water containing and hardness etc.
2,The stop sequence of small hammer crusher is as following introduction,firstly stop feeding of raw materials,when the materials are crushed out and then make the power off and stop the small hammer crusher
3,Pay attention to the lubrication between bearings and other friction surface,Small hammer crusher generally adopts the calcium base grease, sodium base grease or calcium base grease. And the grease of the bearing must be replaced every 3 months.
http://www.dieselcrusher.com/crushers/Small-Hammer-Crusher.html
http://www.dieselcrusher.com/StoneCrusher.html