How to analyze maize milling plant failure? What are the solutions? Maize milling plant may have different problems in running. How to find out the problems? How to maintain the equipment and how to solve the problems?

(1) Check the fastener, rotating part and lubricant before starting the maize milling plant;
(2) Before starting the maize milling plant, run it without load and then charge in maize to make them uniformly scatter along the roller by regulating the clearance.
(3) Pay attention to operation of rotating parts and bearings. If it occurs over heat, check and find reasons in time.
(4) Choose the grinding roller according to different materials.
(5) Check the roller regularly. The roller should be round and complete with good grinding teeth. Fast and slow rollers are of similar diameter and parallel axis.
(6) Cleaning tools such as brush and scrapper should have pressure to tightly stick to the roller to improve cleaning effect.
(7) Charging and grinding rollers should be passed revision of static and dynamic balance to prevent eccentric vibration.
( Moisture in the materials should be less than 15%.
(9) The MAIZE MILLING PLANT should be well sealed to prevent flying dust; The spare parts should also be sealed to prevent spill of lubricant.
(10) When you stop the maize milling plant, you should stop charging in materials first. Then clean the machine till it finishes grinding.

Failure analysis and solutions of maize milling plant
1. Corn Grinder vibrates seriously. tighten the motor screws; tighten the ground bolts; replace the bearing; rearrange the hammer ; adjust the hammer, making sure different of weight not more than five gram.
2. The noise from the corn grinder Adjust the belt; stop the machine, clean the things; replace the hammer; stop the machine and change parts.
3. Separating the grits are not pure Change the slice and sieve; reassemble the slice.
4. Tiny husks in the corn grits repair blower; clean the air channel 5. The production decreases.

Repair the motorm of the maize milling plant; replace the hammer; make the input uniform.
http://www.corn-milling-machine.com/PRODUCTS/Maize-Milling-Plant/700.html