vicardino:
Where precisely in Osun State and can you drop your email so we can communicate further? Thanks greatly sir.

Let’s talk backstage, sir.

Will try and send you a mail now.

Critique this plan for me, please.

Good day, I have a plot of land with a building up to linted level that is up for sale at agbara along GZI idayin aldura.

Price is 7m (negotiable)
Interested buyer is allowed pay upfront of 2m and we can get an agreement on how to pay the balance in a flexible form. This is a distress and urgent sale. You can contact me on 08134860895 and 09050809689.

Thanks

sgtponzihater1:


Cost?

Good day, I have a plot of land with a building up to linted level that is up for sale at agbara along GZI idayin aldura.

Price is 7m (negotiable)
Interested buyer is allowed pay upfront of 2m and we can get an agreement on how to pay the balance in a flexible form. This is a distress and urgent sale. You can contact me on 08134860895 and 09050809689.

Thanks

Joyful365:


Thank you. It's a 3 bedroom flat... Judging by your suggestion, it'll cost almost or more than 2 million for only woodwork on this building?

Depending on the height of the roof,your location, type of woods, lengths and quality of the woods... This my ongoing project though Open Flat roof,it cost my Cl 1.7m for the roof,Cement board and roofing sheet installations.The wood work cost Us 400k only for Materials. You can budget 1m(maximum) for your woodwork.

olukaygold:

Depending on the height of the roof,your location, type of woods, lengths and quality of the woods... This my ongoing project though Open Flat roof,it cost my Cl 1.7m for the roof,Cement board and roofing sheet installations.The wood work cost Us 400k only for Materials. You can budget 1m(maximum) for your woodwork.

Can you please send pictures of the finished work? Plus can you say the total cost including sheets, accessories and workmanship

For your building construction project, Bill of Quantity( *BOQ *or Quotation chat a professional on 08099212590 note BOQ attract a token charges for you to get the accurate Labour and Materials Cost of your Building project thanks in anticipation :Note Serious Customers only..... a trial will convince you

iammarvellux:
.it's 50% Discount!



*ESTATE OF THE DAY*

AMAZING GRACE ESTATE, PHASE 2. LOTTO

This Estate's advantages, highlight the importance of quality and natural living within a well-defined neighborhood.

An environment where expectations are turned into reality & attract major investors and poised for great rental income returns and capital appreciation.

Your future investment portfolio is incomplete until you key into this very promising piece of property

Location: *IJERE, Oriyanrin, off Orhumerunmu Road, by NASFAT, Olowotedo Bus Stop*

Title: *Survey & Deed of Assignment*

Size: *500sqm & 300sqm*

Topography: *Dry Land*

Actual Price:
500sqm - 2.5m
300sqm - 2m

PROMO Price:
500Sqm - 1.250,000
300 Sqm - 1m

*AMENITIES;

✅ Perimeter Fence
✅ Gate House
✅ Electricity
✅ Drainage
✅ Road Network


*NEIGHBOURHOODS:*
Diamond Estate
Ime Estates
Proposed Govt. Primary School)
Lotto
Bank of Industry Estate
Zero-Interest Cooperative




We got More!

hit the link below and see other estates at 50% discount


https://www.nairaland.com/8262557/lands-half-price-ember-months



For more enquiries, site inspection and more pls contact Mr Emenike on +2348038781738(WhatsApp Enabled)

Available

Good morning to the beautiful people of this wonderful thread.


Call/Whatsapp for interlocks/stamped concrete

09068938839.

Preparation/ setup of formwork for the roof gutter for the hidden roof of this building

A client discussed the reason for the delay in proceeding with the painting as due to pop and screeding cracks and I gave my opinion after advising him to get a professional assessment done to determine it wasn't a structural problem.
The chats with permission from the client is attached to get better professional advice and a lesson to pick a thing or two from my observations.

Structural engineers can give their assessment.
The pop cracked as well as gypsum cement screeding.

Osinachiadima global enterprise

[quote author=Joyful365 post=132869813]Please guys help me with the quantity of materials or cost estimate to roof this structure or do the woodwork...

The back of the building will be gable roofing style and I want to use long span aluminium 0.55mm gauge.

How many planks will I need for the woodwork 2x2, 2x3, 2x4 and 3x4?
What about aluminium sheets?

The width of the building is like 33ft
The length is like 44.4ft
The shootout is around 8x12ft (not sure exactly)

I’ll give you the best quotation and good quality material as well. With warranty contact me through my signature below call or WhatsApp me 09166530063 ….
Will the house have parapet or not sir?

Call or WhatsApp me 09166530063
I’m a professional roofing carpenter and I install all kind of roofing sheet such as long span, step tiles. Stone coated etc.. with warranty 100%
Check my page to see all my recent work
I work worldwide I’m available at your service…
And I’m price is affordable…

For your building construction project, Bill of Quantity( *BOQ *or Quotation chat a professional on 08099212590 note BOQ attract a token charges for you to get the accurate Labour and Materials Cost of your Building project thanks in anticipation :Note Serious Customers only...a trial will convince you

Someone here was asking about plywood POP recently.

I found this on twitter


https://x.com/gani_jonathan/status/1859151166086459651?t=28jpqb0WIcIkm12iw2F5Lg&s=19

VanuatuWycombe:


Use fiber cemented board, instead. It can’t catch fire. 6mm thickness would be fine, since it’s for ceiling.

No need to screed it. Two quotes of primer and light sanding before your number of desired coats (finish) would make it come out well.

I have put a sample here. You can buy other brands too.

Can you shed more light on the installation of this pls, and what the final look will be like. Regards

adeememman:

Can you shed more light on the installation of this pls, and what the final look will be like. Regards

How you want your POP to look will determine the kind of wooding (nogging/logging) profile your carpenter will nail, using quality wood.

You will then cut fiber cement boards to various sizes that can cover up those areas you want to cover and leave (reveal) areas you want to reveal but you can treat the exposed edge of any fiber cement board with appropriate putty, for smoothness.
Where two cuts of boards will meet, make sure you leave a space the size of 1 inch screw in-between the boards for expansion and contraction.

You can pre-drill your fiber cement board before screwing them to the wooden profile you have already nailed.

After all this, buy sticky fiberglass mesh and tape it all along the middle point of where two boards meet.

Drill all electrical and lighting holes where necessary. You can bring out the cable from the trunks then or bring them out later when your electrician lays them.

You can pre-cut these holes before you screw your board up or you can cut the holes after screwing up the boards into the ceiling.
I assume you or your carpenters will have necessary power tools to do this.

You too can do this and you will save yourself hundreds of thousands of Naira.

Back to the process:
This fiberglass mesh you paste theirs will guide against cracking along the joints when the board expands or contracts.

After laying of fiberglass mesh, use the same concrete putty or POP putty you used to dress the exposed side of your fiber cement board the other time, and fill them into the joints in-between the boards. Let the putty cover all the fiberglass mesh at both sides of the board.

Don’t forget to put putty to cover all those exposed screw heads too.

When the putty has dried the next days carry out light sanding, to have a smoother surface.

Use your judgement and apply putty to areas where you feel there are needs to do that.

You POP is ready.
You can then tell your painter to carry out necessary painting steps on them.

I assumed you would have measured the level and height of your ceiling and marked them out well, either using a conventional way or a more modern way.

You can watch a few YouTube videos and you will understand my explanations better. Whether they use gypsum board, plywood, or fiber cement board, the process is the same.

You may not use metal for the nogging/loggings, where they use it.

gbadexy:
Structural engineers can give their assessment.
The pop cracked as well as gypsum cement screeding.

My one cent sir:

1. They didn’t use fiberglass mesh at all. (People use drywall paper tape but fiberglass mesh tape is more durable and lasts longer)

2. They didn’t use industry-grade putty. They used POP putty to fill the joints (if at all).

Project of such magnitude need professional who understand chemical reactions and have some level of material science.

Lots of our artisans only have experience in final finishing, which we Nigerians mostly seek/sought after.

I went to Afri-Global in Ikeja some months ago and I saw this type of cracks.

I have attached a sample industrial -grade putty here sir and that of fiberglass mesh.
They only need to follow the instructions in timing intervals and that’s all. Materials like this have been premixed from factory.


To fix it:

Crack open all those joints to the point where the crack stopped and score a deeper cut into the POP across the path of the crack.

Re-screw the board well (that’s if it was not well screwed before) if board was not used, ignore this step.

Blow out all dusts very well.

Cover/tape the joints with fiberglass mesh.

Apply industrial grade putty to cover the holes and the fiberglass mesh.

Leave to dry till next day.

Sand down to flatten the surface to align with the surface of the uncracked areas.

Follow necessary painting steps.

**. Don’t forget to score (cut deeper hole) at the end where the cracking stops/terminates or fades out pata pata. After scoring the end, the whole thing will look like a ‘T’

Every correction you make will be like a long letter T with a long tail but a small head. The head that you score should not be more than 2 inches long

Finding the best [url]affordable hairdressers London[/url]https://www.markdownservices.com/ has to offer is easy with our services. We specialize in delivering high-quality haircuts, styling, and treatments at budget-friendly prices. Whether you’re looking for a fresh new look, a simple trim, or expert coloring, our experienced professionals ensure you receive exceptional service tailored to your style. Get premium haircare that fits your budget and leaves you looking your best. Book your appointment today and discover why we’re among the top choices for affordable hairdressers in London!

VanuatuWycombe:


My one cent sir:

1. They didn’t use fiberglass mesh at all. (People use drywall paper tape but fiberglass mesh tape is more durable and lasts longer)

2. They didn’t use industry-grade putty. They used POP putty to fill the joints (if at all).

Project of such magnitude need professional who understand chemical reactions and have some level of material science.

Lots of our artisans only have experience in final finishing, which we Nigerians mostly seek/sought after.

I went to Afri-Global in Ikeja some months ago and I saw this type of cracks.

I have attached a sample industrial -grade putty here sir and that of fiberglass mesh.
They only need to follow the instructions in timing intervals and that’s all. Materials like this have been premixed from factory.


To fix it:

Crack open all those joints to the point where the crack stopped and score a deeper cut into the POP across the path of the crack.

Re-screw the board well (that’s if it was not well screwed before) if board was not used, ignore this step.

Blow out all dusts very well.

Cover/tape the joints with fiberglass mesh.

Apply industrial grade putty to cover the holes and the fiberglass mesh.

Leave to dry till next day.

Sand down to flatten the surface to align with the surface of the uncracked areas.

Follow necessary painting steps.

**. Don’t forget to score (cut deeper hole) at the end where the cracking stops/terminates or fades out pata pata. After scoring the end, the whole thing will look like a ‘T’

Every correction you make will be like a long letter T with a long tail but a small head. The head that you score should not be more than 2 inches long

Insightful. Thanks for your contribution.

Skydivine:


Count the numbers of palm trees, contact people who do the uprooting , then calculate the cost before proceeding.
Where I am currently building, We uprooted about 12 palm trees for 10k each.

Another thing to remember is cost of moving the fallen palms from the site because the uprooting guys will not move it for you.

Even when they have uprooted the trees, they would need to roll the trees away from the proposed building area, they will still need to cut them into movable sizes. That cost money too.

Some people do use bulldozer. It will do all the work but might cost much more.

The palm trees are much, it isn't worth the stress and funds....

floshady02:
@redgem if you’re in London go to woolwich or Peckham. You’ll find cargo companies there. You can walk into their offices or warehouse

Thanks bunch.......

gbadexy:


Insightful. Thanks for your contribution.

You are welcome sir.

redgem:


The palm trees are much, it isn't worth the stress and funds....

Why do you want to uproot the palm trees? I will only uproot the built area and live with the rest of the trees. It will be really nice for me. I don't fight nature. It is cheaper to live side by side with nature.

nycobama:

Where are you located. Send sample of your previous job to my email. Olumidepopoola44@gmail.com

Lagos.
Sent ✅

gbadexy:
Structural engineers can give their assessment.
The pop cracked as well as gypsum cement screeding.

The cracked gypsum screeding is surprising!!!
(Could be poorly mixed or lack of adhesive bond)

If the POP crack is extremely serious, it could be a structural related issue (settling foundation) or Installation issue ( incorrect mixing & application) or very poor materials used.

I've said it on here before & let me reiterate again.

Please note that POP is liable to crack due to its natural attributes, Pop keeps drying even after installation which causes it to shrink hence the reason for some crack.

HamtabFawaz2:


The cracked gypsum screeding is surprising!!!
(Could be poorly mixed or lack of adhesive bond)

If the POP crack is extremely serious, it could be a structural related issue (settling foundation) or Installation issue ( incorrect mixing & application) or very poor materials used.

I've said it on here before & let me reiterate again.

Please note that POP is liable to crack due to its natural attributes, Pop keeps drying even after installation which causes it to shrink hence the reason for some crack.

Thank you for the contribution. I'm sure the concerned member is taking notes.

Osinachiadima global enterprise
Home of kinds of building materials

https://celebrity-sand-and-granite./



THE BEST INVESTMENT  ON EARTH  IS EARTH.
follow me let's  bring your dream project to live🏤🏠🏰

✅️ IF YOU'RE LOOKING FOR QUALITY LOOK NO FURTHER ✅

📞 *CALL OR WHATS APP CELEBRITY SAND AND GRANITE SUPPLIER ON. 08037136667*

💥 WE SUPPLY💥 TO ANY LOCATION 
       🟡 GRAVEL.
       🟡 PLASTERING SAND.
       🟡 SHARP SAND.
       🟡 FILLING SAND
       🟡 TOP SOIL
       🟡 GRANITE
       🟡 STONEBASE
       🟡 SALT FREE SAND.
       🟡 WE HAVE 30 20 &10TONS.              TRUCK FOR PROMPT DELIVERY
       🟡HIRING OF SITE EQUIPMENT AVAILABLE FOR HIRE.( TRACTORS CRANE LOWBED WHEEL LOADER
( CARTAPILAR) SWAMP BUGGY etc.

💥 OUR DELIVERY  AND QUALITY  TOP NOTCH 💥

📍TRANSPORTATION COST DEPENDS ON LOCATION AND QUANTITY.

🔴CASH ON DELIVERY ALSO AVAILABLE

✅️we also offer site management  services.


WHEN PROPERLY MOBILIZED WE CAN MOVE TO ANY LOCATION AND DELIVER

[quote author=Procarpenter post=132955985][/quote]
Just get 3 quotes and compare.