seunben:
Thanks for the response. Aside the center rug option, are there any anti slip solution i can use to improve the grip on the tiles. I found this product online, I don't know if is sold in Nigeria or is there any similar product that I can buy here in Nigeria

Alliswell73:
I salute all the experts in the house.

Please, what is the standard size of doors now in vogue?

The reason for my question is that, I see some houses with big entrance doors? Is that the new design? What's the size of this door? Also, is it the same for bedroom or those ones have their own sizes.

I would like to know the height and length of these doors for reference purposes.

Thanks.

rotecch77:
Happy last month of the year 2024.

Another Big project loading, 3 floors shopping-complex in Ibadan by Arbo contractor Ltd
Client ; Old NL Member

Watch out! Watch out!! Watch out !!!

MDDarah84:
I need a good artwork designer for a project in Akure now.
I also need a capable hand for pop

Drop your WhatsApp number if you are capable of delivering.

gaeul:
Good Day House, please for upstairs, how many inches block should be used. Please and thanks

EgunMogaji2:


I have a suspicion.

Maybe while you’re here you can construct a substructure for me.

rotecch77:
Happy last month of the year 2024.

Another Big project loading, 3 floors shopping-complex in Ibadan by Arbo contractor Ltd
Client ; Old NL Member

Watch out! Watch out!! Watch out !!!

ProjSynergies:


CreteShield Elastocryl is a Cementitious Solution to Damps or Capillary effects of Ground Water on walls. It’s a two component (A&B)
CRETESHIELD ELASTOMERIC SKIMCOAT is a two-component acrylic modified cementitious coating that requires only on site mixing to form the ideal product to waterproof and resurface concrete, masonry, and most other construction materials.
* Can be applied by brushes, prevent water from the positive side(external)
* Mixed with the plaster slurry, to form an integral part of the plaster(Damp walls treatment). This allows for the formation of the waterproof film within the wall components.

CreteShield Elastomeric Skimcoat cement based, two components with the crack filling capabilities, high abrasion resistant and insulating material.
USAGE AREA

-Positive insulations of the wall and grounds.

-Insulations on the concrete, plaster and alum applications.

-Balcony, terrace, swimming pools, decks, tanks, dams.

-Wet areas, shower and baths.
-Insulations of the outer curtain walls.

-Pre-cast and pre-fabricated elements, roofs.

The surface to be applied on should be certainly clean and moist, If the surface is dry, it should be moistened providing no accumulation. The oil, dust, rust or the factors reducing the adherence should be eliminated.

-Application Method
Preparation Of The Mixture
Component B (10kg) in liquid for is put into a clean and appropriate container.
Component A (20 kg) in powder constantly by means of a mixer and it is mixed slowly to prevent any agglomeration.
The mixing process takes 5 minutes for homogeneous structure. The mortar that is available to apply with a brush in homogeneous form is obtained as the result of mixing process.

For “Damp Walls”
The wall should be scarified to remove any loose sand from the wall, then the mix should be prepared as follows
*The (A) Cementitious is mixed with sand and Portland cement to get a smooth powder mix.
*The (B) Polymer Solvent should be mixed in water for slurry preparation.
The mixture achieved should be used to plaster the face of scarified wall, this allows for formation of a waterproof film within the wall structure, thus preventing rejection of paint or flaking of the screed on the wall.

-Application

CEMENTITIOUS COATINGS
brush smoothly in the directions perpendicular to application should not be made at high temperatures or frost so the morning hours or the evening time should be preferred.

well as to feature high abrasion resistance.

-The product has high adherence and features an excellent adhesive on concrete

-The product presents a good resistance against the weather conditions, UV, mechanic impacts and abrasion

rotecch77:


Mechanical demolition of old structure to pave way for new one

EgunMogaji2:


I have a suspicion.

Maybe while you’re here you can construct a substructure for me.

Charisdesigns:

Two things that influences door dimensions are
1)Building code standard
2) Aesthetics

The standard dimension for doorway for residencial building is
Entrance/exterior = 1.2m x 2.1m
Interior = 0.9m x 2.1m

Anything more is for aesthetics purposes, and yes doors with wider width and height are more aesthetically pleasing than the standard dimension.

You can decide to do a 1.2m x 2.4m or 1.5 x 2.7m. Primarily, the width should not be less than 1.2m because of moving in and out of home furnitures and other appliances.

Pics 1 is a design we did with standard door size 1.2m x 2.1m
Pics 2 is has a dimension of 1.5m x 3m.

twinskenny:
I have this inverter for sale


5kw hybrid


Price 450k

08051355133