PROBLEM 1. IMAGES APPEARS BLURRED

SOLUTION : If the image appears blurred, check the transfer roller, and laser-scanning assembly.

A worn transfer roller can cause a “faded” image symptom. The transfer roller cannot be cleaned as it must be replaced. In addition, the dust on a lens or mirror of the laser-scanning assembly can distort the beam and cause image problems. Remove the screws securing the top and examine the interior.

Carefully examine and clean the reflecting mirror and lenses. Typically, the laser assembly can easily be removed for cleaning or replacement purposes.

PROBLEM 2. FUZZY LASER OUTPUT

SOLUTION : Fuzzy laser output maybe due to the dirty corona wire or running out of toner. Appearance of horizontal lines in the printing indicates the damaged or dirty print drums or print roller as all these are part of the cartridge. Therefore replacing the cartridge is a better option.

PROBLEM 3. PRINTOUT ARE APPEARING WHITE

SOLUTION : If the print out appears white in printing, then shake the toner package for an equal distribution of powder. If the problem persists, then clean the transfer corona assembly. Due to the accumulation of dust on the assembly, the electrical charge that assembly holds is unable to attract toner from the drum.

Having other issues relating to computers? please feel free to Visit www.orgutech.

PROBLEM 4. PAPER CURLS WHEN IT COMES ON THE OUTPUT BIN OF THE PRINTER

SOLUTION : Such a situation occurs when the fusing area of the printer apply more than required heat on the paper. Check whether the control panel of the printer has any option to adjust fuser temperature. Otherwise, consult the authorized vendor of printer.

PROBLEM 5. PRINTER PRINTS BLANK PAGES

SOLUTION: The first possible reason could be toner running out of powder. To overcome this problem, first turn off the printer and pull out the toner from the printer. In case, the powder is out stock, then replace the toner and print a test page from the computer.

Another reason could be the presence of sealing tape (preventive seal on the opening of the tone to avoid any damages) on the top of the toner.

Check the toner for sealing tape. If Present then remove it, and fix the toner back in the printer. Now try to print a test page from the computer.

Printers also print blank pages due to the presence of blank pages in the file. If possible delete those blank pages from the file.
Having other issues relating to computers? please feel free to Visit www.orgutech.

Richbboy22:
PROBLEM 1. IMAGES APPEARS BLURRED

SOLUTION : If the image appears blurred, check the transfer roller, and laser-scanning assembly.

A worn transfer roller can cause a “faded” image symptom. The transfer roller cannot be cleaned as it must be replaced. In addition, the dust on a lens or mirror of the laser-scanning assembly can distort the beam and cause image problems. Remove the screws securing the top and examine the interior.

Carefully examine and clean the reflecting mirror and lenses. Typically, the laser assembly can easily be removed for cleaning or replacement purposes.

PROBLEM 2. FUZZY LASER OUTPUT

SOLUTION : Fuzzy laser output maybe due to the dirty corona wire or running out of toner. Appearance of horizontal lines in the printing indicates the damaged or dirty print drums or print roller as all these are part of the cartridge. Therefore replacing the cartridge is a better option.

PROBLEM 3. PRINTOUT ARE APPEARING WHITE

SOLUTION : If the print out appears white in printing, then shake the toner package for an equal distribution of powder. If the problem persists, then clean the transfer corona assembly. Due to the accumulation of dust on the assembly, the electrical charge that assembly holds is unable to attract toner from the drum.

Having other issues relating to computers? please feel free to Visit www.orgutech.

PROBLEM 4. PAPER CURLS WHEN IT COMES ON THE OUTPUT BIN OF THE PRINTER

SOLUTION : Such a situation occurs when the fusing area of the printer apply more than required heat on the paper. Check whether the control panel of the printer has any option to adjust fuser temperature. Otherwise, consult the authorized vendor of printer.

PROBLEM 5. PRINTER PRINTS BLANK PAGES

SOLUTION: The first possible reason could be toner running out of powder. To overcome this problem, first turn off the printer and pull out the toner from the printer. In case, the powder is out stock, then replace the toner and print a test page from the computer.

Another reason could be the presence of sealing tape (preventive seal on the opening of the tone to avoid any damages) on the top of the toner.

Check the toner for sealing tape. If Present then remove it, and fix the toner back in the printer. Now try to print a test page from the computer.

Printers also print blank pages due to the presence of blank pages in the file. If possible delete those blank pages from the file.
Having other issues relating to computers? please feel free to Visit www.orgutech.

Hello sir, pls with regards to printing and photocopying, I want to start the business, pls can you help highlight steps to take, cheap for starters photocopier or printer to buy?? will really appreciate your response

.