Server Room Environment Monitoring System
Environmental monitoring systems prevent hardware damage to server rooms, data centers and network closets with critical condition alerts and remote reboot capability.

Also known as: remote environment monitoring system, monitor server rooms, data center monitoring, computer room, network closet, temperature sensor, remote power reboot, web alert thermometers, server room monitoring.

Environmental threats in your server room can cause a lot more damage than hardware or software problems. Redundant hardware, backup tapes, UPS battery arrays, generators and other fault-tolerance measures can all be rendered useless if your server room overheats or floods. Don't ignore environmental threats – remotely manage them with our Klasys range of Server Room Environment Monitoring System or Intelligent Power Distribution Control Unit via TCP/IP Ethernet protocol over CAT5 through an RJ45 connector.

Monitor Temperature The most common environmental threat in any server room or wiring closet is heat. Detect critical rises or drops in temperature, and receive notifications when heating problems occur.

Monitor Humidity Detect abnormal humidity conditions. You define the humidity levels that are appropriate for each sensor's environment.

Detect the Presence of Water Whether it's a tripped sprinkler system or a flash flood, a server room or wiring closet is just about the last place you want to see water. Receive notification as soon as water makes an appearance.

Monitor Physical Security Monitor "dry-contact" devices including motion sensors, door sensors, vibration sensors and smoke detectors.

Control Power Remotely reboot and control power (on/off) to servers and network devices.
And many more….
-------------------------------------------------------------------------------------------------------------------------------------------

K-FCS Low-Cost Environment Monitoring System – Supports up to 24 Temperature Sensors
Real-time environment and security monitoring and alerts over IP
Daisy-chain many temperature/humidity/dew point, thermocouple, and digital input sensors
Also known as: Remote environment monitoring system, EMS, monitor networking closets, server room alert, IP temperature humidity sensor, web enabled thermostat thermometer alarm logger.


PRODUCTS DESCRIPTION
The FCS Environment Monitoring System (EMS) with 1-Wire Sensor Interface monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, web page, network management (SNMP), and/or SMS messages (via external USB 3G modem).
The system supports 24 single reading 1-wire sensors in any combination - temperature, humidity, dew point, thermocouple or digital inputs-and 2 separate digital inputs.

• Monitor and manage environmental and security conditions over IP.
• Sensors supported:
o 2 digital inputs sensitive to contact closure.
o 2 RJ11 6P4C connectors for daisy-chaining 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination.

 Up to 24 temperature, thermocouple, or any single reading 1-wire sensor can be connected between both RJ11 connectors.
 Up to 8 temperature/humidity/dew point combination 1-wire sensors can be connected between both RJ11 connectors. Each temperature/humidity/dew point sensor is equivalent to 3 single reading sensors.
 Up to 12 FCS digital input expanders can be connected between both RJ11 connectors to allow a maximum of 24 additional digital inputs. Each FCS-1W is equivalent to 2 single reading sensors.
 Maximum cable length supported on each connector is up to 600ft (183 m) depending on the configuration and number of connected sensors.
 Use RJ11 splitters (RJ11-3JCK) to daisy-chain 1-wire sensors (sold separately).
• Sensors are hot pluggable.
o The sensors will automatically be detected on power up or a Detect Devices button on the summary page can be selected when logged into the unit.
• Monitors (ping) up to 4 IP network devices - alerts are sent if devices are not responding.
• Sensor conditions can be configured to trigger alerts by themselves, and/or be used in combination with other alerts to trigger one Smart Alert.
• Supports 4 IP network video cameras for live view of any facility.
• Create multiple alerts for any installed sensor.
• Sensor conditions can be configured to trigger alerts by themselves, and/or be used in combination with other alerts to trigger one Smart Alert.
o Configure up to 32 alerts, and one Smart Alert.
• USB port for connecting USB modem.
• Dual redundant power supplies for connection to two separate power sources.
o The second power supply is sold separately.
• Available with optional Power over Ethernet (POE).
• Integrates with various Open Source SNMP monitoring packages - Nagios and MRTG
o The unit can be polled via SNMP.
• Security: HTTPS, SSLv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
• Ideal for a wide range of applications including IT infrastructure monitoring, cold storage/freezer monitoring, or any unmanned area that needs to be monitored.

for more info and deployment in your server room, dial 080'-3836-8255, 080'-599-04321

SENSOR & DETECTOR INFORMATION

AC VOLTAGE POWER DETECTOR
The EMS AC Voltage Detector with Relay detects voltage from 50 to 250 VAC when connected to an environmental monitoring system with dry contact inputs, battery, sensor, or other device. The internal relay closes when sensing voltage above 60 VAC and opens when sensing voltage 55 VAC and below.

• Monitors the presence or absence of AC voltage, 50-250 VAC.
• 2-position screw-terminal connection.
• Supports 2-wire sensor cable up to 1,000 feet (305 meters).
• Available with a standard US 120V 10A NEMA 5-15 plug or universal 250V IEC C14 socket.
• Examples of interfacing devices:
o Electrical sources
o Power couplings
o Line power
o UPS, power supplies
o Sump pumps
o Intrusion Prevention Systems (IPS), Intrusion Detection Systems (IDS)
o Sensors, such as: strain gauge, pressure transducer, RTD, thermistor, thermocouple, piezo electric sensors, photo resistor, industrial accelerometer, any kind of variable resistor, and any kind of sensor that outputs a voltage.
Specification
• Measurement range: detects mains voltage from 50 to 250 VAC.
• Measurement indication: Alarm or Normal.
• Sensor type: open/closed contact switch.
• Includes internal relay.
o Maximum close voltage: 90VAC @ 60Hz, 108VAC @ 50Hz
o Minimum open voltage: 10VAC @ 60Hz, 12VAC @ 50Hz
• Includes 6-foot (1.8-meter) 2-wire cable to connect to an environmental monitoring system.
• FCS-ACVDRLY-515: Standard US 120V 10A NEMA 5-15 plug on attached 5.5-foot (1.67-meter) cord.
• FCS-ACVDRLY-C14: Universal 250V IEC C14 socket on attached 6-inch (0.15-meter) cord.
• Operating temperature: 32 to 140°F (0 to 60°C).
• Storage temperature: 32 to 158°F (0 to 70°C).
• Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
• Regulatory approvals: CE, RoHS


SMOKE DETECTOR

Smoke Detection Sensor - UL Approved, TAA Compliant

KLASYS-SDS-TAA-P
• For warning of smoke.
• Photoelectric smoke detector.
• Built-in 135° F (57° C) thermal heat sensor.
• Includes mounting hardware.
• Connect to digital input sensor ports.
• Voltage Supply: 8-35VDC
• Max Current Consumption: 200uA (0.2mA)
• Alarm Output: Relay (NO)
• Screw terminal
o To connect to the digital inputs use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
• Maximum cable length: 1,000 ft (305 m)
• Includes 12V/1A power supply.
• Compatible with KLASYS-MICRO.
• Regulatory approvals: UL
• TAA compliant.


WATER/LIQUID DETECTOR

Spot Liquid Detector with Built-In Visual & Audible Alarm
• Use to detect conductive fluids in confined areas
o Place the sensor on a flat surface under HVAC equipment, dishwashers, washing machines, refrigerators, compressors, or electrical switchgear rooms and other potential leakage areas.
• Compatible with KLASYS-MII-LXO and KLASYS-MICR.
• Water level detection range: 0.03 to 0.53" (0.79 to 13 mm).
• DPDT alarm contacts.
• Audible alarm signal: 85 dB at 1 foot distance.
• Red LED for visual alarm signal.
• Green LED for power
• Current consumption: 30mA typical, 85mA maximum @ 12VDC.
• Dimensions WxDxH: 2x4.13x0.19 in (51x105x30 mm).
• Includes adjustable mounting bracket attached via adhesive strips or two screws.
• Operating temperature: 32 to 140°F (0 to 60°C).
• Includes 12V/1A power supply.
• Cable length: 4.9 ft (1.5 m)
o Maximum cable length: 1000 ft (305m)
• Regulatory approvals: CE, RoHS.

ask us for quote for Environmental Monitoring Systems for your Server Room

We thank our numerous client from this platform

Receive SMS and Email alert before your equipment go down

Secure your environment and remotely monitor your equipment, know the condition of your equipment in remote site.

Call for your deployment with service warranty

We wish all our numerous customers & client Happy Independent Day

We thank all our various client & Customers from this forum

..

Thanks to all our client

Better yet, save yourself all that hassle and move your files to Microsoft Azure today. No on-prem server rooms, no monitoring, no NEPA/Inverter wahala. Just leave it to Microsoft to handle and manage your data. It could even host your businesses' sites and allow you focus on other things. Call us today at Lotus Beta Analytics Nig Ltd.

_{You are already there. Let us take you further}

Also available

We thank all our various client & Customers from this forum

Installation available nationwide

Call for deployment in your building, sever room or data center.

Digital LCD Temperature/Humidity Monitoring Alarm System with SMS & Call Alert

Main features of temperature control box

1. It adopts the highly accurate temperature and humility sensor. Once you insert the SIM card, it could alarm and report to user when the
temperature and humility goes above or below your preset value via call and sms. User could also send text to check the temperature
and humility in real time.

2. LED display current temperature and humility value.
3. Up to 6 authorized phone numbers, each number can be used to receive call or SMS or both of call and SMS while alarm occurs.

4. Waterproof
5. 4 relay outputs which allow you to control other devices when it alarms, also user could remotelycontrol the relay on/off by phone or
sms.

6. It could also work with other wired/wireless device, like PIR motion sensor, smoke detector, gas sensor, water flood sensor, etc. to
consist a complete alarm system.

7. External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers

8. 6 phone number for SMS and auto-dial


2. Main features of temperature control box
1. It adopts the highly accurate temperature and humility sensor. Once you insert the SIM card, it could alarm and report to user when the
temperature and humility goes above or below your preset value via call and sms. User could also send text to check the temperature
and humility in real time.
2. LED display current temperature and humility value.
3. Up to 6 authorized phone numbers, each number can be used to receive call or SMS or both of call and SMS while alarm occurs
4. Waterproof
5. 4 relay outputs which allow you to control other devices when it alarms, also user could remotely control the relay on/off by phone or
sms.
6. It could also work with other wired/wireless device, like PIR motion sensor, smoke detector, gas sensor, water flood sensor, etc. to
consist a complete alarm system.
7. External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers

3. Main functions of temperature control box
1. Top temperature relay output
2. Bottom temperature relay output
3. Alarm relay output
4. Upper temperature limited alarm
5. Maximum temperature limited alarm
6. Analog digital display work and alarm state
7. 16 remote controllers
8. 12 wireless detectors
9. 4 wired detectors
10. 4 relay output
11. 6 phone number for SMS and auto-dial
12. Alarm Time 0~127 seconds
13. SMS words limited in English SMS words limited in 160 bytes

4.Applicable use location of temperature control box
8. Server Room Monitoring
9. ATM rooms
10. Data Center
11. Factories Warehouse
12. Hospital Room Monitoring
13. Air-Conditioned Rooms
14. Cold Storage Monitoring
15. Green House Monitoring
16. Building Management and Automation

Nationwide deployment

Happy independent day
.

Thanks

Alpha Technology

consult us for EMS

d

monitoring

Monitor your equipment

Central monitoring

Secure your equipment

,,

Excellent delivery nationwide

,,

Be smart

Secure your environment

Thank you all for your patronage,

.