peaceland:
Good people,
Please I need help.
My Su-kam Falcon 1600 inverter.
The MAINS ON light keeps flashing once phcn light is supplied, the inverter lines will switch off and it appears it's not charging on phcn light. Suspecting this happened after a bad supply for phcn. Appears still charging with the solar.
What can be the likely issues?
Please is it something I can resolve?
Is there a reset method?.
Is there a reliable repair/service firm around ibafo-mowe axis?.
Thank you.

Check the input fuse, you may be lucky and its a simple issh

emmy9500:
which portble solar solution can i go for i am looing at the Qasa 500QPG, is it a good option

PS: I want something without complex installation, i am a corp memeber and will leave here in 1 year so i need something that i can just pack with me

ALL -IN -ONE HOME SOLAR SYSTEM

° 80ah battery capacity.
° Lithium technology
° Multi-port access (USB, 12v car port, 12v DC ports x 4, 230v AC)
° Integrated DC meter for power monitoring
° 12v DC port supports 10 amps/120 watts
° 230v AC output supports 150 watts output to power laptops, fan, router, digital cameras, CCTVs and other digital devices.
° XT60 port for charging supports up to 18v 180 watts solar panel or 36v 300 watts solar panel input.
° Can be charged using laptop charger via the included XT60 Male plug.

° DC 12v port powers one 3 watts DC bulb to 5 days, 3 bulbs up to 3 days.
° Laptop for over 18hrs.
° 90watts laptop for 13hrs
° 150watts 50" lcd tv for 5hrs
° 100watts 42" led tv for 6hrs
° 60watts 30" lcd tv for 9hrs
° 50watts led tv for 13hrs

NGN140,000

SAFETY PRECAUTIONS

1. The adapter used to charge the device or adapter must be of equivalent output value.

2. Wrongly plugged devices can damage both device and Battery pack.

Malevonent:



........
Bros bros brosses.......

I get.
1lightly used cell, with broken stud.
3 lightly used cells, but bloated
2 used cells, terminal damage..leaking.
4 cells that accidentally drained to 0 volts, u can try your hands at reviving them.

How do we talk on these?

[quote author=emmy9500 post=114827609[/quote]

emmy9500:
which portble solar solution can i go for i am looing at the Qasa 500QPG, is it a good option

PS: I want something without complex installation, i am a corp memeber and will leave here in 1 year so i need something that i can just pack with me

1kva inverter

100ah battery

PWM charge controller

200w solar panel

I think this may be better than the QASA 500QPG

mctfopt:


1kva inverter

100ah battery

PWM charge controller

200w solar panel

I think this may be better than the QASA 500QPG

i am just worried about having to carry the setup after a year, any idea on the cost of this?

emmy9500:


i am just worried about having to carry the setup after a year, any idea on the cost of this?

Not that heavy if you ask me. I saw something like this in Konga ...just that the panel is 150w. Not too much of a biggie (if you ask me)

Thanks.
Will get this checked

Malevonent:


Check the input fuse, you may be lucky and its a simple issh

BRAND NEW SOLAR PANELS!

Bescom 180w ... 47,000
Flames 370w ..... 88,000
Rubitec 220w .... 65,000
Rubitec 380w..... 90,000
Bescom 550w ... 135,000

Era 330w (poly) .... 90,000
Jinko 365w .......... 100,000
JA solar 415w ...... 115,000
JA solar 455w ...... 125,000
Jinko 550w ........... 150,000

Contact,
Smartcell global services
CALL ONLY:: 081-350-31951
WHATSAPP::: http://.us/w/?c=a46ea5

SOLAR WIFI CAMERA FOR SALE!!!

Watchmen Waterproof Wireless Solar Battery Power Surveillance Security Camera with WiFi & TF Card Slot (1080P,2.0MP) . Available with installation base

Condition: Sparingly used. Works like new

Location: Lagos state

Flat rate Price : 50,000


Contact,
Smartcell global services
CALL ONLY:: 081-350-31951
WHATSAPP::: http://.us/w/?c=a46ea5

We have started laying the panels.

https://www.youtube.com/watch?v=TSxY_P4WdsI

chris81964:
We have started laying the panels.

https://www.youtube.com/watch?v=TSxY_P4WdsI

Even me I'm excited from here where I am simply watching as it unfolds thru the screen.

Few days ago, I told someone that madness and foolishness is someone having money and sprawl of residence like Tinubu has and still using diesel generator as the main source of power, Haba!

@obinna37, my panels are 24v
]OK,connecting 24v 1200w solar panel in parallel to a 12v system,is it the best connection, sorry for to much question

Please does anyone have a 48v External battery charger

Hi guys,

I have 2 pieces of 320W and 2 pieces of 300W panels; all are mono and connected in parallel.
Given a suitable MPPT charge controller, how many watts should I expect to generate given a good sunlight hour?

Roughly 900w

Ovaltine:
Hi guys,

I have 2 pieces of 320W and 2 pieces of 300W panels; all are mono and connected in parallel.
Given a suitable MPPT charge controller, how many watts should I expect to generate given a good sunlight hour?

obinna37:


@obinna37, my panels are 24v
]OK,connecting 24v 1200w solar panel in parallel to a 12v system,is it the best connection, sorry for to much question

Yes, it gives you good voltage and current head even if you have little voltage drop over a long distance ur cc might still get 24v reading but if you have correct wire Guage then u re ok

Ovaltine:
Hi guys,

I have 2 pieces of 320W and 2 pieces of 300W panels; all are mono and connected in parallel.
Given a suitable MPPT charge controller, how many watts should I expect to generate given a good sunlight hour?

Connecting them in parallel isnt optimal, unless the cable run is short. And you are using thicker cabled.
Since you have mppt, doing 2s2p may be a win win.

Energy is neither created nor destoryed, if ur setup is optimal you shud be getting 70 to 90 percent of your combined panel capacity over 1kw in your case

earthrealm:


Connecting them in parallel isnt optimal, unless the cable run is short. And you are using thicker cabled.
Since you have mppt, doing 2s2p may be a win win.

Energy is neither created nor destoryed, if ur setup is optimal you shud be getting 70 to 90 percent of your combined panel capacity over 1kw in your case

Cable is 100m round trip. 10mm

durodee:
Roughly 900w

Highest I get is 650w. I think MPPT is 60A.

Good morning,
I checked and it appears mine does not use a fuse box!!!!!

Malevonent:


Check the input fuse, you may be lucky and its a simple issh

peaceland:
Good morning,
I checked and it appears mine does not use a fuse box!!!!!

The fuse might be inside, directly on the PCB. Be careful if you have to open it though, lethal voltages are present inside.

Ovaltine:


Cable is 100m round trip. 10mm



Highest I get is 650w. I think MPPT is 60A.

100m or 100 ft, if meters, its massive, wud suggest you switch to 4s if ur cc can handle the Voc or manage 2s2p, if it cant.

If 100m 'round trip' I presume the actual distance is 50m? Please clarify. Even if 50m is quite a long distance (almost length of 2 plots of land) that voltage drop will seriously affect harvest. Consider running in series as advised

Ovaltine:


Cable is 100m round trip. 10mm



Highest I get is 650w. I think MPPT is 60A.

bbally:


Yes, it gives you good voltage and current head even if you have little voltage drop over a long distance ur cc might still get 24v reading but if you have correct wire Guage then u re ok

thanks

Brand new DEYE 48v 5kw hybrid inverter 850k

---

different types of lifepo4 bms(JBD and DALY])

---

we can waybill to any location in Nigeria.
whatsapp 0802-057-4628

Please what size o wire can I use to connect 2 100ah battery to my 1.6kva 24v inverter?

Experts in the house please help out.

ManAdii:
Please what size o wire can I use to connect 2 100ah battery to my 1.6kva inverter?

Experts in the house please help out.

You should state if its a 12v or 24v system. I think you won't go wrong with 16mm2

Half the panels are up.

https://www.youtube.com/watch?v=7gnifFk5yf4

Namzy:

You should state if its a 12v or 24v system. I think you won't go wrong with 16mm2

24v system

ManAdii:

24v system

16mm2 should be fine

durodee:
If 100m 'round trip' I presume the actual distance is 50m? Please clarify. Even if 50m is quite a long distance (almost length of 2 plots of land) that voltage drop will seriously affect harvest. Consider running in series as advised

Yes, 50m from panel to controller.
The MPPT is 50A . I’ll try this series.

chris81964:
Half the panels are up.

https://www.youtube.com/watch?v=7gnifFk5yf4

Really nice