Dam5reey:
Let me introduce you to the cheapest 12.8V 100ah in the market..
Support the channel with a subscription


https://www.youtube.com/watch?v=hjrJo8RRpq4

206k
Roughly 51.5k per cell

ajabani4allah:

What's the cost of the Sunlith battery?

750k..

Contact of seller +234-701-027-9437

dollarnaira:




206k
Roughly 51.5k per cell

You dey calculate sha...

Bms, Case, terminals carton nko?

Dam5reey1:



You dey calculate sha...

Bms, Case, terminals carton nko?

Ah na true oo.
2nd life or not it is cheap.
But still some guys will bent on Tubular 220ah. That 220ah dey burst their brains

Edrizz:




What is VOC of the 250watt panel?

37.2 (Canadian panel)

Edrizz:



When one of ur support teams was asked about the best way to protect sako inverters from lightning/thunder strike since it interferes with dish signal amidst other problem if connected to an earth rod, the support responded that lightning/thunder strike is a natural phenomenon n can't be prevented. I was just dumbfounded with his reply, like mehn, people dey this world oooo there are engineers n there are enginaira

He go lie for you?
.

Meanwhile if you have issues with Sako inverter or battery, you can take it to festac their head office. I think their timeline is 72hrs from when booked unless Na big problem Naim be 1week.

dollarnaira:


Ah na true oo.
2nd life or not it is cheap.
But still some guys will bent on Tubular 220ah. That 220ah dey burst their brains

Compared to.the price of the Powmr it is cheap but the Powmr uses Grade A cells which were scanned and brought out the info.And you can't blame folks who stick with their tubular.They don't want wahala: Top balancing,bottom balancing,BMS cut off,waking up battery. Let's be sincere ,the LFP wahala small small.

1pcs of 15kwh felicity lithium battery ready for delivery to PH, To order yours call/whatsapp me on 08168986461

If you are on a tight budget and need an inverter that can carry significant household appliances, then you should consider our Easun 3000w Pure sine wave inverter

Price: 100,000naira

Features:

- Truly pure sine wave. No humming sound from your devices

- Consumes little (around 7w) to power itself from your batteries, leaving you more juice to power your main load (appliances), hence more backup time from your batteries

- Can power significant household loads like refrigerators/deep freezers, microwave, blender, toasting machine, and occasional heavy loads (like pressing iron, 1hp pumping machine and inductive cooker, rated 1100w and lower). Just make sure your batteries can support the significant load consumption from these appliances

- Inverter can be easily repaired; we have a dedicated technician for its repairs and we stock the critical parts to ensure swift repairs. To further minimise downtime hours, we can swap out a faulty inverter for a working one immediately. Terms and Conditions apply

Follow our dedicated thread to read and watch videos of feedbacks and testimonies
https://www.nairaland.com/7833852/3000w-easun-pure-sine-wave


https://www.youtube.com/watch?v=C3BCseUj3kw?si=Fa7kyufgS1IPm5b8

jasp12:


37.2 (Canadian panel)

It is utmost impossible to have 100% harvest from ur panels, max is always 70%. So going by that u can series 19pcs n discard d remaining 6.

Iinnov8:
If you are on a tight budget and need an inverter that can carry significant household appliances, then you should consider our Easun 3000w Pure sine wave inverter

Price: 100,000naira

Features:

- Truly pure sine wave. No humming sound from your devices

- Consumes little (around 7w) to power itself from your batteries, leaving you more juice to power your main load (appliances), hence more backup time from your batteries

- Can power significant household loads like refrigerators/deep freezers, microwave, blender, toasting machine, and occasional heavy loads (like pressing iron, 1hp pumping machine and inductive cooker, rated 1100w and lower). Just make sure your batteries can support the significant load consumption from these appliances

- Inverter can be easily repaired; we have a dedicated technician for its repairs and we stock the critical parts to ensure swift repairs. To further minimise downtime hours, we can swap out a faulty inverter for a working one immediately. Terms and Conditions apply

Follow our dedicated thread to read and watch videos of feedbacks and testimonies
https://www.nairaland.com/7833852/3000w-easun-pure-sine-wave


https://www.youtube.com/watch?v=C3BCseUj3kw?si=Fa7kyufgS1IPm5b8

I can testify to the assertion that this inverter can power many appliances.
I have the 3000w which I currently use to pump my 0.75hp submersible pump .

omotoda:


Compared to.the price of the Powmr it is cheap but the Powmr uses Grade A cells which were scanned and brought out the info.And you can't blame folks who stick with their tubular.They don't want wahala: Top balancing,bottom balancing,BMS cut off,waking up battery. Let's be sincere ,the LFP wahala small small.

PowMr used grade A
Assuming Cworth used grade B

U see dat tubular, dont let us go there oo it is the best way to waste money sir.

Me oo I dont follow crowd. I will chose an active balancer over a hard wired bms over and over. But some ppu think that a system without bms is fire .

You either do 24 panels in series and toss 1 panel or you add 1 more panel and do 13S2P (13 Panels in Series in 2 Strings, Then Parallel the two Strings)

24 Panels will give you 6000W @ STC but your best shot is 13S2P which will give you 6500W PV @ STC.

NOTE: Your actual yield will depend factors like quality of the PVs and Installation Conditions.

jasp12:
@jonescosmos @dollarnaira @juror How will you connect 25 panels (250 watts, 24v) to 5kva Felicity hybrid inverters with 450voc?

jonescosmos:
You either do 24 panels in series and toss 1 panel or you add 1 more panel and do 13S2P (13 Panels in Series in 2 Strings, Then Parallel the two Strings)

24 Panels will give you 6000W @ STC but your best shot is 13S2P which will give you 6500W PV @ STC.

NOTE: Your actual yield will depend factors like quality of the PVs and Installation Conditions.

Thanks

dollarnaira:


PowMr used grade A
Assuming Cworth used grade B

U see dat tubular, dont let us go there oo it is the best way to waste money sir.

Me oo I dont follow crowd. I will chose an active balancer over a hard wired bms over and over. But some ppu think that a system without bms is fire .

What I use BMS is for Monitoring SOC, I am not a fan of BMS too, just using the ones I have to learn and experiment. I use the Junctek meter now, so BMS is redundant just in case......

Inverter is a BMS itself. But LFP can push too much Current so BMS is highly recommend once you go above 12V 100ah, Unless you are the BMS and always on standby.

Dam5reey1:


What I use BMS is for Monitoring SOC, I am not a fan of BMS too, just using the ones I have to learn and experiment. I use the Junctek meter now, so BMS is redundant just in case......

Inverter is a BMS itself. But LFP can push too much Current so BMS is highly recommend once you go above 12V 100ah, Unless you are the BMS and always on standby.

But how will one pull 100a on a 12v system deliberately? Why do we then purchase editable Inverters to curb lvd. Even as dumb as most Satchet inverters,they can never go beyond LVD.

I am not always comfortable when there is sth in between batteries. The inverter should take care of that. My opinion.