Promo of 1KVA 12V Famicare inverter is on now.

This inverter is an uninterrupted power supply for load home appliance. AC output switches automatically between wire and inverter. It adopts switch power supply with high efficiency. Under the same load, the battery working time can be ½ to 1/3 longer than conventional inverter battery, a certain safety load shall be reserved for induction load (because actuation current of induction load is 5 – 10 times of running current). This equipment can be used in putting on lightings (energy-saving bulbs are recommended), radio, fan, audio, computer, fax, TV, hair dryer, printer, mini-fridge and other home appliances that are rated less than 800w at a time. The total power ratings of the appliances must not be more than 1000 watts at a time and it cannot carry Air-conditioner, boiler, heater, deep freezer and the likes.
Properties:
1. Maximum continuous load: 800w (transient maximum : 1200w)
2. Inverter output: AC220V
3. Charger Power Input: AC 160v – AC 260V
4. Charging current: 0-15A (Automatic variable with battery capacity, the current will drop to 0 automatically when it is fully charged.)
5. Charging rate depends on the type of batteries that are used, i.e. 100 ah or 200 ah or 150ah, e.t.c and also the number of batteries are connected and lastly how connection of batteries are done either in series or parallel. Example, for flat state of 200ah battery, it may take roughly 9 hrs to charge depending on the stability of the current while for 100ah, it may take roughly 4 hrs depending on the stability of the current.
6. Inverter Output voltage : Variable ( 100v – 300v) ( yellow fine tuner button on built-in main board.
7. Discharging rate depends on the amount of loads it carries, the heavier the loads, the faster the batteries used are discharged. Just like a smart phone, if it is not used for any purpose and the battery is fully charged, it lasts long but once it is used for calling, it drops little but when it is online for chatting or browsing, then the battery quickly drains.
8. Causes of damage ranges from over-loading of the inverter (just like generators), main supply entering the output of the inverter and power surges or low/ high voltage from PHCN mains or generators (though it can be prevented if it is connected on good stabilizer higher than the inverter itself.

Call 08183795397 or send email to info.olariel@gmail.com for quick order.
Promo while stocks last.