Toyota introduced the A25A-FKS or 2.5 D-4S engine in 2016 like the first member of its new engine family “Dynamic Force Engines”. It is a 2.5-liter inline four-cylinder gasoline engine combined the newest Toyota’s internal-combustion technologies which can be found separately in previous engines produced in the last years.

The A25A engine has a new open-deck aluminum alloy cylinder block with sleeves cast directly in block material. The longitudinal axis of the crankshaft has a 10 mm offset against the axes of the cylinders. The crankshaft has 7 traditional counterweights and one with tooth gear. That gear on the crankshaft drives the balancing unit attached to the engine block at the bottom. The engine got the high-strength connecting rods and lightweight aluminum T-shape pistons with a special resin coating. The upper compression and oil rings have a DLC coating (Diamond Like Carbon). The pistons are cooled with engine oil sprayed by two oil jets for each piston. The oil system was also upgraded. The main innovation is the second generation variable-pressure oil pump controlled by ECM electronics.

The engine has an aluminum 16-valve cylinder head with two chain-driven camshafts in separate casing at the top. The angle between the intake and exhaust valve is 41 deg. The intake port has a laser-cladded valve seat while the exhaust has a normal pressed valve seat. The valves are actuated by camshafts via roller rocker arms. The engine is equipped with hydraulic tappets for continues zero valve clearance. The intake and exhaust camshafts are driven by low-friction single-row timing chain with a pitch of 8.0 mm. The A25A-FKS features the Dual Variable Valve Timing system (DVVT). The electric actuator (VVT-iE) is used for the intake camshaft; the traditional hydraulic VVT actuator was attached to the exhaust camshaft. The exhaust camshaft has an additional cam for the high-pressure fuel pump. The head cover is made from polymer material.

The A25A engine has a combined fuel injection – in the combustion chambers (direct) and in the intake ports (multipoint). That Toyota’s system is named as D-4S. Each high-pressure fuel nozzle for direct injection has six holes and spray fuel at mid and high engine loads. The low-pressure nozzles in ports have 10 holes. The multipoint fuel injection operates at low speeds and at mid-range together with direct injection. The fuel pressure in the system is a range of 2.4-20 MPa.

The engine has a simple fixed-geometry plastic intake manifold and electronically controlled throttle body - ETCS-i. There is no restricted air in the intake manifold, in that reason the engine was equipped with a vacuum pump driven by exhaust camshaft to create enough vacuum in a brake booster. From the exhaust side, there is a stainless steel exhaust manifold (header) with integrated catalyst converter and EGR pipe.

The modern environmental rules forced the big changes in the engine cooling system of the engines. The 2.5 D-4S engine has an electric motor-driven water pump, electronically controlled thermostat, and shut-off valves. The new system contributes to faster warm up and optimal cooling on all loads range.

In the result, the new 2.5-liter power plant is the most technologically advanced engine ever produced by Toyota. The maximum thermal efficiency achieved the line of 40% - one of the world's best results for a conventional engine. Now, when the A25A-FKS moved the output and fuel economy on the next level, the 2AR became the past.

Engine Specs

Manufacturer Toyota Motor Corporation

Production years 2016-present

Cylinder block material Aluminum

Cylinder head material Aluminum

Fuel type Gasoline

Fuel system Direct/Multipoint Fuel Injection

Configuration Inline

Number of cylinders 4

Valves per cylinder 4

Valvetrain layout DOHC

Bore, mm 87.5 (3.43 in)

Stroke, mm 103.4 (4.07 in)

Displacement, cc 2,487 (152 cu in)

Type of internal combustion engine Four-stroke, naturally aspirated

Compression Ratio 13.0:1
14.0:1

Power, hp 177-205 hp (283 kW)/5,700-6,600

Torque, lb ft 162-184 lb ft (220-250 Nm)/3,600-4,800

Engine weight -

Firing order 1-3-4-2

Engine oil weight SAE 0W-16

Engine oil capacity, liter 4.5 (4.8 qt)

0.3 (0.4 qt) – oil filter.

Oil change interval, mile 10,000 (15,000 km) /12 month

Applications Toyota Camry XV70, Toyota Avalon, Toyota RAV4

gazzuzz no more Mobil 1 0w20 oo na mobil 0w-16,

now it 10000 miles or one year.

jarkbauer:


The modern environmental rules forced the big changes in the engine cooling system of the engines. The 2.5 D-4S engine has an electric motor-driven water pump, electronically controlled thermostat, and shut-off valves. The new system contributes to faster warm up and optimal cooling on all loads range.

In the result, the new 2.5-liter power plant is the most technologically advanced engine ever produced by Toyota. The maximum thermal efficiency achieved the line of 40% - one of the world's best results for a conventional engine. Now, when the A25A-FKS moved the output and fuel economy on the next level, the 2AR became the past.

Engine Specs

Manufacturer Toyota Motor Corporation

Production years 2016-present

Cylinder block material Aluminum

Cylinder head material Aluminum

Fuel type Gasoline

Fuel system Direct/Multipoint Fuel Injection

Configuration Inline

Number of cylinders 4

Valves per cylinder 4

Valvetrain layout DOHC

Bore, mm 87.5 (3.43 in)

Stroke, mm 103.4 (4.07 in)

Displacement, cc 2,487 (152 cu in)

Type of internal combustion engine Four-stroke, naturally aspirated

Compression Ratio 13.0:1
14.0:1

Power, hp 177-205 hp (283 kW)/5,700-6,600

Torque, lb ft 162-184 lb ft (220-250 Nm)/3,600-4,800

Engine weight -

Firing order 1-3-4-2

Engine oil weight SAE 0W-16

Engine oil capacity, liter 4.5 (4.8 qt)

0.3 (0.4 qt) – oil filter.

Oil change interval, mile 10,000 (15,000 km) /12 month

Applications Toyota Camry XV70, Toyota Avalon, Toyota RAV4

High compression ratio engine. Premium fuel must be required @green highlights.
Unreliability and high failure rates may set in like BMW E90 @red bolded.

kingreign:


High compression ratio engine. Premium fuel must be required @green highlights.
Unreliability and high failure rates may set in like BMW E90 @red bolded.

Was about to point out the same too. At those compressions, premium fuel will be a must. We are going to have a lot of failed engines when they eventually get here.

9icetoo:

Was about to point out the same too. At those compressions, premium fuel will be a must. We are going to have a lot of failed engines when they eventually get here.

As in ehn

9icetoo:

Was about to point out the same too. At those compressions, premium fuel will be a must. We are going to have a lot of failed engines when they eventually get here.

Not a problem 2az to the rescue we go transplant and dey alright Las Las

Electronic Exhaust valve system.
Electronic intake valve system.
Electronic thermostat system.
Electronic Vacuum system via exhaust 4 brakes.
Electronic controlled Oil Pump.

All these Electronic techs Toyota is implementing into this new engine. I hope these ECMs won't fail easily and they are waterproof modules.