Although it is rare for wood shredders to have difficulty in starting up, it does not mean that it does not happen. Therefore, how to prevent the start-up difficulty of wood shredders is also necessary. So let's first understand why the startup is difficult:

    1. No lubrication or lubrication is not in place

    Like other machines, wood shredders require frequent lubrication with grease. It should be pointed out here that when choosing grease, we should choose those with higher viscosity and good lubrication. Grease can reduce the damage caused to the wood shredder due to machine friction.

    2. Long-term operation

Whether it is a wood shredder or other machines, there is a common feature that long-term operation can cause damage to the machine. Among these damages, one of them is the difficulty of starting. Therefore, it is very necessary to arrange the wood shredder for scientific and reasonable production. People often say that you think I am a machine and don't need a break. In fact, the machine also needs rest, but we have not paid attention to this for a long time.

    3. Bearing gland is excessively worn

    Excessive wear of the wood shredder bearing gland can also cause difficulty in starting. This is because the bearing gland is excessively worn, which can affect the dust collector. Once the precipitator is affected, the large amount of dust generated by the wood shredder during operation is doped into the hydraulic system. If there is too much dust in the hydraulic system, the lubricating performance of the lubricating oil will be degraded or even deteriorated, which will make the wood shredder difficult to start and work properly.

    The reason why the wood shredder is difficult to start is now known, so how can we prevent it?

    First, let the staff strengthen the inspection of the wood shredder, find out the abnormal situation in time, and even contact the manufacturer directly to avoid the problem;

    Second, strengthen daily maintenance and maintenance work to ensure that the wood shredder is in good working condition;

    Third, above the feed opening of the wood shredder, the feed rate is stabilized and the volume of the feed material is symmetrical;

    Fourth, select a grease with a high viscosity and good lubrication effect;

    Fifth, rationally arrange the working hours of the wood shredder to avoid excessive work;

    Sixth, after the wood shredder is finished, it should be idling for a period of time to completely remove the materials in the wood shredder bin.

    If you are unable to start the wood shredder during production or for other reasons, and you can't solve it yourself, you can always contact our technicians. They will provide you with technical support and even come to your door to solve your problems.

http://www.charcoal-machines.com/sawdust-charcoal-briquette-production-line