The 5000 series aluminum sheet Mg is the main alloying element. Due to the difficulty in nucleation of the precipitated phase, this series alloy cannot be strengthened by heat treatment, and its mechanical strength is usually improved by work hardening. What is the density of the 5 series aluminum plate representative products 5052, 5083, 5086, 5005, 5182 aluminum plate, and the 5 series representative aluminum plate of AL5052h32?


The density of pure aluminum is small (ρ=2.7g/cm3), which is about iron
1/3, low melting point (660℃), aluminum has a face-centered cubic structure, so it has high plasticity (δ: 32~40%, ψ: 70~90%), easy to process, and can be made into various profiles, Sheet. Good corrosion resistance; but the strength of pure aluminum is very low, annealed state
The value of σb is about 8kgf/mm2, so it is not suitable for structural materials.


[Density of AL5052 aluminum plate] The density is 2.72g/cm³.


Chemical composition: aluminum Al: balance; copper Cu: ≤0.10; magnesium Mg: 2.2~2.8; zinc Zn: ≤0.10; manganese Mn: ≤0.10; chromium
Cr: 0.15～0.35; Iron Fe: ≤0.40; Note: Single: ≤0.05, Total: ≤0.15.


5052 aluminum sheet introduction


The density of AL5052h32 aluminum plate is 2.72g/cm³. 5052 aluminum plate is AL-Mg series alloy aluminum plate. Magnesium is the main alloying element in 5052 alloy aluminum plate. It is the most widely used anti-rust aluminum. This alloy has high strength, especially with Fatigue strength: high plasticity and corrosion resistance, cannot be strengthened by heat treatment, good plasticity during semi-cold work hardening, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and polishing.


AL5052 aluminum plate specifications


The thickness of the aluminum plate is: 0.15mm-50mm, the width is: 100mm-2000mm, and the length is: 1000mm-9000mm,


Aluminum coil thickness: 0.05mm-15mm, width: 15mm-2000mm


Insulation aluminum plate thickness: 0.3mm-0.9mm width: 500mm-1000mm length: unlimited


Anti-slip aluminum plate thickness: 1mm-10mm width: 1000mm-1500mm length: 2000-3000mm


Embossed aluminum plate thickness: 0.1mm-0.9mm width: 500mm-1200mm length: unlimited