Ojochogwusunny:
I don't base in Lagos but I believe you can get it in Alaba market...I bought mine from Aliexpres

alright thanks

waleayeni1:


OK bro. I tracked one sattelite with ghallywood channel and gtv and La TV. Is that it?

please give me the lnb position and the the tp you used in tracking 32e

lala5yuru:
please,what will be the Lnb position?

3.0clock. But why not wait till the satellite comes back?

Is there anyone watching channels on 3740 H 30000 on IS20 @ 68.5 East ? How do you open them and with which receiver ? They are PV encrypted...

ugasat:
Is there anyone watching channels on 3740 H 30000 on IS20 @ 68.5 East ? How do you open them and with which receiver ? They are PV encrypted...

then use a PV enabled decoder

WaytoGo:

i followed your steps and hit nigcomsat green at 63% with the tp you gave (12539H5000) tighten the dish and changed tp to 12518h29500 and the green disappear to red. change back to 12539h5000,the green at 63%.i tried twerking the lnb to increase signal but couldn't go beyond 63%.please what should I do next.dish size is 60cm

lala5yuru:
i followed your steps and hit nigcomsat green at 63% with the tp you gave (12539H5000) tighten the dish and changed tp to 12518h29500 and the green disappear to red. change back to 12539h5000,the green at 63%.i tried twerking the lnb to increase signal but couldn't go beyond 63%.please what should I do next.dish size is 60cm

No! You did not..follow or understand the procedure I provided.

Read again, patiently this time, below ;

For those having difficulties to nail Nigcomsat.
This is how I nailed 42e Nigcom with all the MBC channels and 60cm dish;
Endeavor to get a mint or brand new strong Lnb, don't use any other and especially the old one.
Now, input or set your sat finder or decoder tp to 12539h5000.
With the above tp you should hit green depending on location or expertise/experience, and when you finally do, endeavor to attain 70% above signal quality. Then, tighten your dish accordingly, and do remember to tweak to improve or increase your signal. After all, done and tightened, kindly change your tp to 12518H30000-- when and immediately you do, the signal strength may decrease on this one but it will surely capture all the sat position channels without itches or skipping. This worked for me after several attempts with success without NBC channels.

You see the difference between mine tp % and your first signal to mine? In your own case you attained " 63% " while the info provided states, 70% and above? Also, note that my second tp ends in "30000* and not "29500".

Ojochogwusunny:
when you open the v8 application scroll down there are four options though they are not labelled, click on the third option by the right; you will see satellite and a + sign click on the plus sign u will be given options to edit satellite,frequency,sym&pol.....

thanks

WaytoGo:



No! You did not..follow or understand the procedure I provided.

Read again, patiently this time, below ;




You see the difference between mine tp % and your first signal to mine? In your own case you attained " 63% " while the info provided states, 70% and above? Also, note that my second tp ends in "30000* and not "29500".

i tried to go beyond 63% but couldn't and that has been my problem. please can you tell how to attain 70% and above. I am using v8 finder bot05.thanks

lala5yuru:
i tried to go beyond 63% but couldn't and that has been my problem. please can you tell how to attain 70% and above. I am using v8 finder bot05.thanks

You're using V8 finder and you still get 63%?
Abeg, go finder installer

lala5yuru:
i tried to go beyond 63% but couldn't and that has been my problem. please can you tell how to attain 70% and above. I am using v8 finder bot05.thanks

Y not try using another lnb

dlollyboi:

Y not try using another lnb

the lnb am using is strong. Well as you have said I will try another one and give feedback. thanks

lala5yuru:
the lnb am using is strong. Well as you have said I will try another one and give feedback. thanks

You can also change the wire from your lnb to decoder/satfinder. Make sure it's new and short. Then check your dish if it's not warped.

Good morning house pls gurus recommend a good FTA decoder my strong 4922a is not coming on again. thanks in advance

Ameboperoo:

You can also change the wire from your lnb to decoder/satfinder. Make sure it's new and short. Then check your dish if it's not warped.

What do you mean by warped bro? I have some rust on the surface of my dish, could this lead to poor signal reception?

sampete:
What do you mean by warped bro? I have some rust on the surface of my dish, could this lead to poor signal reception?

Bend. As in bent. Not perfectly rounded.
The rust can also be responsible from experience.

Ameboperoo:

Bend. As in bent. Not perfectly rounded.
The rust can also be responsible from experience.

okay. Is it advisable to respray the dish or just get a new one?

lala5yuru:
the lnb am using is strong. Well as you have said I will try another one and give feedback. thanks

make sure your lnb is at 2oclock ....is very easy to nail a bird with v8 finder,I use v8 bt03.....it has an accurate compass. what's your phone model?

eedristo:
Good morning house pls gurus recommend a good FTA decoder my strong 4922a is not coming on again. thanks in advance

Whats the exact probs with it?

kudos4u:
I need an HD decoder if anyone want to sell should Holla me.

srt 4922 and viewsat for sale

dlollyboi:

Whats the exact probs with it?

it has not been used for like 2months and i got home yesterday it worked for like 15mins and it went off. didnt come on again.

eedristo:



it has not been used for like 2months and i got home yesterday it worked for like 15mins and it went off. didnt come on again.

Does it power on?

lala5yuru:
i tried to go beyond 63% but couldn't and that has been my problem. please can you tell how to attain 70% and above. I am using v8 finder bot05.thanks

Like somebody rightly wrote above, you probably need an installer or your LNB is not the original one. Get a good and original LNB and if all else fails then know that, the positioning of your dish or location needs to be changed.

sampete:
okay. Is it advisable to respray the dish or just get a new one?

If you have the resources, you can get a new one. I have some old dishes that would not receive Nigcomsat nor 68.5e. I just used such for 28e, 36, 45e etc.

Ameboperoo:

If you have the resources, you can get a new one. I have some old dishes that would not receive Nigcomsat nor 68.5e. I just used such for 28e, 36, 45e etc.

Okay. Thanks.

dlollyboi:
Does it power on?

no it doesnt power on .

Ojochogwusunny:
make sure your lnb is at 2oclock ....is very easy to nail a bird with v8 finder,I use v8 bt03.....it has an accurate compass. what's your phone model?

my lnb is at 9'0clock and my phone model is tecno w3. thanks I will change to 2'0clock and see if it will increase

Ameboperoo:

You can also change the wire from your lnb to decoder/satfinder. Make sure it's new and short. Then check your dish if it's not warped.

my dish is not warped but the wire is long. I will cut it short and try again to see if it will increase the signal. thanks

lala5yuru:
my lnb is at 9'0clock and my phone model is tecno w3. thanks I will change to 2'0clock and see if it will increase

my former phone. if you want to know how effective that finder is,get a phone that have magnetic sensor.like gionee or HTC phones

Chelsea vs Luton FACUP @KBC channel 10e LIVE

Ojochogwusunny:
my former phone. if you want to know how effective that finder is,get a phone that have magnetic sensor.like gionee or HTC phones

please what would the magnetic sensor do

Good day everyone in the house and happy Sunday. Please what is the strongest TP to track 45°E?