I. The Serious Harm of High Temperature to the Screw Oil Press

The temperature is originally an essential factor for the oil press to improve the oil output during the pressing process.

However, the high outdoor temperature in summer and the heat generated by the friction between the oil seeds and the equipment during the pressing process make the oil press easy to reach the temperature limit in a short time.

After running for a certain period of time, the casing of the machine will be very hot, not to mention the temperature of the internal screw. If the temperature is too high, it will not only destroy the oil nutrition but also soften the internal structure of the equipment.

If the key components such as the screw press are subjected to high temperature and the extrusion of hard oil seeds, it is easy to cause damage and deformation of the components. Excessive use at high temperatures for a long time is very likely to completely scrap the oil press machine. We should be aware of the serious harm of high temperatures to equipment.

II. How to Use the Oil Press Correctly in the High-temperature Season?

1. The easiest and most effective way is, of course, to lower the temperature of the equipment.

The equipment is placed in a cool and ventilated place during work, and the indoor temperature can be controlled if conditions permit, so that the oil press can work for a long time in high-temperature seasons.

2. In the high-temperature season, the equipment also needs to rest.

According to the quality of the oil press, the working time of the equipment is set to prevent the equipment from being damaged by high temperatures due to long-term work.

3. The oil residue will seriously corrode the equipment, and under the high temperature, the equipment will become soft, so the machine needs to be cleaned in time.

However, it should not be disassembled and cleaned immediately after the work is completed. It should be placed for a period of time and the equipment can be disassembled and washed after it has cooled down.

4. Lubricant should be smeared before the equipment works in summer.

After running for a period of time, stop and rest and apply again. The high temperature will increase the friction between the gears, increase the wear and cause damage.

III. Conclusion

As long as paying attention to the above points when operating the oil press equipment, it can effectively prevent the equipment from being damaged due to excessive temperature.