09sixteen:


Regular
I have seen on coupe and convertible

I'll check definitely check that .

OP, update the thread bikonu

Thank you for the feedback. I will update the post

BamBamK:
OP, update the thread bikonu

PART 2
sorry it took this long



https://www.youtube.com/watch?v=gkeExxC1ccs

Antihelminth:


I've never seen that bracing tho ..I'll try check it on the xdrive version .lemme see

I believe they are common on the convertibles

Please show some support by following our Instagram page @rogue_motor_service.
Our progress and builds are posted there too.

https://www.instagram.com/invites/contact/?i=1q62bmlm01pe5&utm_content=s1svhz

8 point Roll cage.
Mild steel 3mm thickness x 1.5inch diameter.

Seat of BBS rs740 for after sorting out 5 lugs adapter kit for the rear.

.

09sixteen:
So we sorted the wheels, got rear disk brakes as that will be needed in future for a hydraulic handbrake to work with. And welded the diff


Now for engine, the bmw m20 isnt that powerful in stock form.

Options are to build a powerful Naturally aspirated m20 or go forced induction. But from my experience working on BMW engines, m20 parts are very scarce tbh.

Another option will be an m30 big 6. Its a 3.0 - 3.5L engine option. A straight swap for an e30 and will provide enough torque too. Not bad. But same thing parts are scarce.
For a long time i never even hard any of those engines in stock. So i knew from the get go i would need something else

Hello please can you direct me to where you got the rear disc conversion parts I am also looking for a differential with a lower number

09sixteen:
For engine. We decided to go with a 24v M50B25. This is a popular choice on e30s. With some little modification you can pull it off easily.


The main reason why we are going with the M50 is because we will build an S50 clone out of it. That way even without Forced induction we have alot more than stock power of an m50b25 (190hp).

Even if we decide to go with forced induction (in future) the m50 iron block is a solid engine. We consider it a 2JZ

We previously had two engines with same modification in the past on our e36. Its the cheapest way to gain over 200HP.

Lol the 2jz is too special for this comparison... I suspect that even Toyota themselves didn't intend for that far-reaching, endless levels of engine modification and tuning

If you are staying in abuja check zuba spare parts market. Bmw dealers or apo mechanic village bmw line

You can also Dm rouge motor services on Instagram (RMS) they also have e30 parts incase you cant find

xfay:


Hello please can you direct me to where you got the rear disc conversion parts I am also looking for a differential with a lower number

Some more

Angle

Kudos

Sha be careful. You don watch enuf south African YouTube drifts. Don't forget most are dead,and they died drifting while drunk ,And over kakul. Drifting is bad in Nigeria,where every and anything can happen. No go dey do those your nonsense sharp bend 5 junction drift. Pray make dangote truck nor loose break the time u dey drift or yahoo boy wey don high on CO dey turbo. Go and drift abroad

Hello, pls ur attention is needed

09sixteen:
What do you guys think. Since i already have the process compiled in a video. Let me just upload it everyone can just watch and then we discuss further

Angrygoat:
Sha be careful. You don watch enuf south African YouTube drifts. Don't forget most are dead,and they died drifting while drunk ,And over kakul. Drifting is bad in Nigeria,where every and anything can happen. No go dey do those your nonsense sharp bend 5 junction drift. Pray make dangote truck nor loose break the time u dey drift or yahoo boy wey don high on CO dey turbo. Go and drift abroad

I appreciate your feedback, yes you are right.
But here is the current situation
We dont drift on open roads. We have three drift arenas, Specifically designed for drifting. Its like you haven't been aware of the efforts already made to get the sport developed here locally.

Hi you sent me an email. I could not access it. I forgot the email i used to register NL
Sorry for the hiccups. Scan below code to reach me on whatsaap

Godsown0:
Hello, pls ur attention is needed

Seasons greetings. Have a wonderful Christmas and happy New year

Angrygoat:
Sha be careful. You don watch enuf south African YouTube drifts. Don't forget most are dead,and they died drifting while drunk ,And over kakul. Drifting is bad in Nigeria,where every and anything can happen. No go dey do those your nonsense sharp bend 5 junction drift. Pray make dangote truck nor loose break the time u dey drift or yahoo boy wey don high on CO dey turbo. Go and drift abroad

Something must kill a Man

If you tried reaching me thru by sending email and no reply, you can scan this barcode and send whatsapp message

Running custom camshafts, need to be precise with the timing

Body works. Wider fenders to accomodate the rear wheels and keep the looks clean. You need to sort out all your body works and little stuffs before paint right.


Wait for final results.

Rear adjustments

Love how dedicated you are to bringing this to fruition.

Thank you. Its a collective effort from the entire team. RMS (rogue motor services)

vivalavida:
Love how dedicated you are to bringing this to fruition.

Checkout our media on Instagram as @rogue_motor_services. Install the app to follow our photos and videos.

https://www.instagram.com/reel/Ckk3atmAxPl/?igshid=Yzg5MTU1MDY=

Lots of cool contents

Young Dk explain how to drift and actually drifting

https://www.instagram.com/reel/ClI3NuEAw6c/?igshid=Yzg5MTU1MDY=

Lookig at the components that made up the 3.0l stroker engine in our e30

https://www.instagram.com/reel/Cl84wJlAAMe/?igshid=Yzg5MTU1MDY=

We are checking the polls, thank you for the feedback. We will keep watching it close

09sixteen:


we want to run a poll.
To all those following or reading this. For a future build, (different car, not this one) what would you prefer.

A turbocharged engine or a V8 swapped engine.

For turbocharged click like
For V8 swap click share