Sandblasting and Painting Training and Certification...

Painting a metal fabrication project involves spraying a water-based or solvent-based paint onto the surface, much like any other painting project. Other than primer and a top coat, often combined into one, painting is simple and straightforward.

Sandblasting and painting involves a little more work and includes pre-treatment, application and curing.

Sandblasting cleans the surface of the project to remove any debris, grease or previous paint coatings, using an abrasive medium. This technique creates small scratches in the surface, which helps paint cover and bond with the material. Without sandblasting, paint may be more prone to chips and cracks. Sandblasting also strips the rust off of steel, giving it a clean slate for the next protective coating.

After this abrasive process, a zinc-based primer and powder are applied with an electrostatic gun that allows the paint to cover the surface evenly and quickly. It also prevents over-spraying and thick coats that are prone to chips, since it repels the excess.

Once sandblasted and painted, the pieces goes into a curing oven so that the primer can cure and gel. When this process is complete, the final coat of paint gets applied. The final coat is applied the same way as the primer, but this is when the desired color or texture comes through. Once finished, the painted piece goes back into the oven to cure.

Benefits of Sandblasting and Painting...

The main benefits of sandblasting and painting vs. painting alone are durability and longevity. More than just a coat of paint, this process prepares the surface, primes the piece and applies consistent coats of paint, along with curing the piece to maximize the protective effects of proper finishing.

Here are some other benefits of sandblasting and painting:

*Resistant to corrosion: Because of the precise primer and paint application, a single coat offers the protection of several coats of traditional paint, without the risk of chips and cracks. Because of this, a sandblasted and painted piece can better withstand the extreme outdoor environment than traditional paint.

*Cost-effective: The sophisticated system of sandblasting and painting prevents overspray, so you get more yield from your paint and waste less.

*Speed: Pieces that are sandblasted and painted dry faster than wet paint, so the entire process happens more quickly. Once the pieces cool, they’re ready to be handled or machined as well, so there’s less downtime.

*Chemical resistance: Certain chemicals can wreak havoc on your finish, but sandblasted and painted finishes are resistant to chemicals and are less likely to chip, crack or wear from contact.

Send a email to: sozoilfieldtraininginstitute@gmail.com for more information.