Bros it has not since 2019 oo, out of about 10 people I installed solar system for using this 2kv inverter, its only one that had problem with it.

The lower 1kv and 500 which doesnt have regulating fans are quite awful though.

ajabani4allah:


Bro, that inverter is not strong enough to tolerate leaving it 24/7 on, it will spoil in no time. Get PSW sachet inverter for this

Please engineers if you have MPPT charge controller any need for buck converter

capnies:
Please engineers if you have MPPT charge controller any need for buck converter

What is the scenario like?

My progess so far on my diy indoor and outdoor power station.
Remains to complete it are.
Inverter.
Case.

officialfestus:
My progess so far on my diy indoor and outdoor power station.
Remains to complete it are.
Inverter.
Case.

Oga u don turn pro ooo.
Pls let us arrest this guy

dollarnaira:


Oga u don turn pro ooo.
Pls let us arrest this guy

Greetings my boss, na una teach me this diy stuff oh.

Automatic change over in progress.

My 24v easun 3kw arrived today, tested it with my 24v 7s 2.5kwh li-ion pack.
Battery was at 28v, plugged a steam iron, and voltage drop to 26.9v.

sonickay:
Well, I this one appears to be over strong. I have been using this inverter for extended period of time on a daily basis since 2019, now on Starlink for 12hrs+ per day for over 3months and waiting for it to spoil cos i dont believe in finixing something if it snt broken.

Btw, do you have used PSW Inveeter for sale?

This is the one i have below I am still using the charger though

Penuelseun:
What is the scenario like?

Thanks I want to connect solar panel through MPPT charge controller to my li ion battery pack

capnies:


Thanks I want to connect solar panel through MPPT charge controller to my li ion battery pack

You don't need a buck converter if your charge controller can go as low as your battery absorb voltage, is your battery 12v, 24v or 48v?

Penuelseun:
You don't need a buck converter if your charge controller can go as low as your battery absorb voltage, is your battery 12v, 24v or 48v?

If I connect the built battery pack to solar charge controller, will my solar panel be able to charge it?

Intellab:

If I connect the built battery pack to solar charge controller, will my solar panel be able to charge it?

Battery voltage? Solar panel voltage? Charge controller type?

Penuelseun:
You don't need a buck converter if your charge controller can go as low as your battery absorb voltage, is your battery 12v, 24v or 48v?

Thanks, my battery is 12v ie 3s

capnies:


Thanks, my battery is 12v ie 3s

If your controller absorb voltage can go down to 12.6v, you are good to go, if not you need a buck converter

Penuelseun:
If your controller absorb voltage can go down to 12.6v, you are good to go, if not you need a buck converter

Thank you very much let me check

officialfestus:
My progess so far on my diy indoor and outdoor power station.
Remains to complete it are.
Inverter.
Case.

This looks nice. Add a thicker insulation eg shrink wrap around it for further insulation. Well done.

Who has 3s 60A BMS for sell or if you know where I can get it please let me know.

Southboy:
Who has 3s 60A BMS for sell or if you know where I can get it please let me know.

Konga

You can achieve this by replacing the wires from inverter output with the wires from inverter ON switch at the relay connection.

ajabani4allah:


That part "put off the inverter" pls can you shed more light on this? I have a 10A 8pin DIY relay I am using but it can only transfer the load but not put off the inverter. Can the relay achieve this? I need something that can also put off the inverter when I am on grid to save my battery from ideal power consumption of the inverter

It depends on what you intend to use it to achieve.

You can get the BMS from vendors here or AliExpress

Southboy:
I just got 360 pieces of 18650 batteries, please how many bms would you recommend I buy plus where can I get it. Thank you

Which vendor here sells BMS, I need it asap

Southboy:
Which vendor here sells BMS, I need it asap

Visit Tetralogy my man

Southboy:
Who has 3s 60A BMS for sell or if you know where I can get it please let me know.

I have the 2way 60a balanced version bms.

Please does exceeding the Total watts oof charge controller does damage to it. For example 12v is(260 watt) for 20amps CC. And you want to connect 300w to it will it affect it.

Penuelseun:
How many cells do you have in series? Max charge voltage for 18650 cells 14s is 58.8, that is 4.2v × 14, but it is better to charge to 4.0v per cell to prolong the lifespan of your cells. Cut off should be 3.0v per cell which is 42v.

What if they are not 18650 cells? I saw a li-ion pack doing 57v top and 48v cutoff. What can be improved about that charging profile?

capnies:
Please engineers if you have MPPT charge controller any need for buck converter

An MPPT is a buck converter at its core. No need.

Intellab:

If I connect the built battery pack to solar charge controller, will my solar panel be able to charge it?

Bro, be careful around li-ion packs of. They are unforgiving if abused.

Trippledots:


What if they are not 18650 cells? I saw a li-ion pack doing 57v top and 48v cutoff. What can be improved about that charging profile?

14×4.2=58.8v max ( decreases lifespan though)
3×14 = 42v cutoff (38.08v for my trusted Samsung 26J).

Trippledots:


An MPPT is a buck converter at its core. No need.

THANKS SO MUCH I'VE BEEN EXPECTING THIS THANKS AGAIN

dollarnaira:


14×4.2=58.8v max ( decreases lifespan though)
3×14 = 42v cutoff (38.08v for my trusted Samsung 26J).

my cut off na 43.4 sef on li ion builds

Trippledots:


What if they are not 18650 cells? I saw a li-ion pack doing 57v top and 48v cutoff. What can be improved about that charging profile?

that is 4.0v per cell, very good charging profile if you want your cells to last long