1) First, dose and match measured raw materials;
2) After distributing, feed raw material into pouring mixer to make slurry;
3) Through thoroughly mixing, the slurry is poured to mould;
4) After pre-curing under a certain temperature and time, the block would reach a certain hardness prepare for cutting;
5) Tilting hoister would turn over 90 degree of mould;
6) Then open the mould and separate it from block, and take the block with side plate to cutting cart;
7) The blocks then be cut through the cutter firstly of two vertical sides of block;
Secondly the horizontal cutting;
9) Finally the vertical cutting;
10) After cutting, the block is hanged to trolley with side plate by semi-finished product hoister;
11) Organizing the cut blocks and put them into autoclave;
12) Hardening the blocks under certain temperature and pressure;
13) Take finished products out of autoclave;
14) The finished product hoister take the finished product to stock shield;
15) Packed for loading;
16) The side plate return back by side plate roller;
17) Side plate would be organized with open mould;
18) Clean the mould and preparing for next pouring;
19) Steel bars processing line for slab production;

Our AAC blocks production line are sold well in Nigeria. If you need more information, please visit: http://www.queenbrick.com/aac-block-machine.html
Contact: Ms Queen
Web: http://www.queenbrick.com