If Nigeria Leaders could expore hidden talents among our
youths I assure you our economy will be better than this.There
are still undiscovered talents in Nigeria. I hope you have heard
about a 14 year muslim boy that made a Clock in U.K, well
oluwaKayode fashina A.K.A www.techfashy.com a tech genius and a blogger who is an Eksu 200level economics student also
made a solar lamp.

His rechargeable lamp had fault and he powered it with a
solar charger. The way he did it remains a mystery to us.
what we only witnessed during the development was that he was carving the body with a hot knife..lol

If someone like this could get financial support from the
government, I assure you that he can perform better than this.
With people like this, we are going places.

wipe ya phone

rayjackobj:

I need help here disabling charging ic or diod on my tecno h6, my little one used a bad charger to charge the phone and since then the phone has been heating up and discharging even without using it and while its charging it burns making the phone useless, any help on what to disable, so I can be using a desktop charger to charge the battery, thanks

this is not a software issue kindly get a close by engineer to get it fixed

NanciaKay:
Please help. Am having a problem receiving calls on my Tecno A+. When a call is coming into the phone, and i try answering, it says dailer not supported. Please what should i do? I can only make calls to people and am also able to send and receive messages. Please help. Thank you

did u flash a wrong rom??

Muyidgreat:
need your help. my Samsung notebook gt n8000 went of and just shows the Samsung logo when turned on. all effort to flash and load new os on it has been futile. it keeps cutting while trying to load. Someone said I have to change the board. is there no way out?

take it back to the manufacturer if the problem persists

maxibrainz:

tanx but i have tried all what you listed, non of this files you listed are available online (scatter file, boot image etc) the problem is i don't have access to a working f8, if not i would have fixed the f8

contact he will help you get the full mtk backup

AwesomeRomeo:
if u mean d custom rom I downloaded, Yes, its in zip format. Tanx.

do you have cwm installed?? if yes flash it through install zip make sure the memory card you will be using is formatted

maxmills:
please guy,my tecno h6 just hangs for like 40secs and then switches off it self,and then I have to remove the battery and put it back b4 it would come on,and sometimes when it booting it would hang on the tecno animation, please guy all I want to know is could this problem be resolved by flashing a new ROM into the phone?,please gurus help a brother.

youngchopper:

The phone is not rooted
And I have a PC

download sp flash tools Download it here
download vcomm drivers Download it here or else it wont detect your phone it will only charge your phone
how to set up drivers

https://www.youtube.com/watch?v=ztm6QE_qiZc
now go to and search for the preloader, boot img, recovery img, and others or better still you can extract all that from the same version of the phone using mtkdriod check here
https://www.youtube.com/watch?v=AJLgSD9zHb8
now after that, launch sp flash tools import the scatter file make sure the scatter file and other files you want tto flash are contained in the same folder.
the files should automatically be loaded there if not, import it manually from the folder you saved it earlier.
plug your phone to pc without the battery then click the the start button. at this jusction, you will need to put the battery and the flashing will start you will see a yellow icon moving just wait till all turn green

this is the final step boot to recovery then wipe /factory reset....congratulation your dead phone is back to life

maxibrainz:

tecno f8 non of the stock rom online worked

do you have access to any working f8

maxmills:
please guy,my tecno h6 just hangs for like 40secs and then switches off it self,and then I have to remove the battery and put it back b4 it would come on,and sometimes when it booting it would hang on the tecno animation, please guy all I want to know is could this problem be resolved by flashing a new ROM into the phone?,please gurus help a brother.

download the mtk backup from then follow the instructions

youngchopper:

The phone is not rooted
And I have a PC

download sp flash tools Download it here
download vcomm drivers Download it here or else it wont detect your phone it will only charge your phone
how to set up drivers

https://www.youtube.com/watch?v=ztm6QE_qiZc
now go to and search for the preloader, boot img, recovery img, and others or better still you can extract all that from the same version of the phone using mtkdriod check here
https://www.youtube.com/watch?v=AJLgSD9zHb8
now after that, launch sp flash tools import the scatter file make sure the scatter file and other files you want tto flash are contained in the same folder.
the files should automatically be loaded there if not, import it manually from the folder you saved it earlier.
plug your phone to pc without the battery then click the the start button. at this jusction, you will need to put the battery and the flashing will start you will see a yellow icon moving just wait till all turn green

this is the final step boot to recovery then wipe /factory reset....congratulation your dead phone is back to life

maxibrainz:

tecno f8 non of the stock rom online worked

maxmills:
please guy,my tecno h6 just hangs for like 40secs and then switches off it self,and then I have to remove the battery and put it back b4 it would come on,and sometimes when it booting it would hang on the tecno animation, please guy all I want to know is could this problem be resolved by flashing a new ROM into the phone?,please gurus help a brother.

download the mtk backup from then follow the instructions

youngchopper:

The phone is not rooted
And I have a PC

download sp flash tools Download it here
download vcomm drivers Download it here or else it wont detect your phone it will only charge your phone
how to set up drivers

https://www.youtube.com/watch?v=ztm6QE_qiZc
now go to and search for the preloader, boot img, recovery img, and others or better still you can extract all that from the same version of the phone using mtkdriod check here
https://www.youtube.com/watch?v=AJLgSD9zHb8
now after that, launch sp flash tools import the scatter file make sure the scatter file and other files you want tto flash are contained in the same folder.
the files should automatically be loaded there if not, import it manually from the folder you saved it earlier.
plug your phone to pc without the battery then click the the start button. at this jusction, you will need to put the battery and the flashing will start you will see a yellow icon moving just wait till all turn green

this is the final step boot to recovery then wipe /factory reset....congratulation your dead phone is back to life

youngchopper:

The phone is not rooted
And I have a PC

download sp flash tools Download it here
download vcomm drivers Download it here or else it wont detect your phone it will only charge your phone
how to set up drivers

https://www.youtube.com/watch?v=ztm6QE_qiZc
now go to and search for the preloader, boot img, recovery img, and others or better still you can extract all that from the same version of the phone using mtkdriod check here
https://www.youtube.com/watch?v=AJLgSD9zHb8
now after that, launch sp flash tools import the scatter file make sure the scatter file and other files you want tto flash are contained in the same folder.
the files should automatically be loaded there if not, import it manually from the folder you saved it earlier.
plug your phone to pc without the battery then click the the start button. at this jusction, you will need to put the battery and the flashing will start you will see a yellow icon moving just wait till all turn green

this is the final step boot to recovery then wipe /factory reset....congratulation your dead phone is back to life

maxibrainz:

yes totally bricked, it doesn't power on

what is the device name? so that i can get you the required files neeeded

bharkarh:
I've done that a billion times yet e no work. Good morning

make sure you have root access to perform this. open root explorer go to vendor you will see bbm there just try and delete the bbm.then download GBBM http://www.datafilehost.com/d/166db7ae and install it normally it will surely work bro

bharkarh:
Hello my bbm have been failing to open it keeps writing "unfortunately bbm has stopped " and I use a Samsung s4.what can I do?

uninstall it and install the latest one from play store

BARNABASS:
Pls help, I am unable to download any app from playstore. It keeps returning to the same page and gives this information under install that "you don't have any device ".my phone is gfive g95.

go to manage apps then clear cache and also clear data

kolexis:
pls help ooo....bricked my tecno f5 nd am trying to flash recovery via sp flashtool buh its nt workin....its jux showing red bar nd telling me failed

that means the scatter file is not placed in the same folder with the boot img and others or maybe your phone is not communicating well with your PC try uninstalling the drivers and installing the. back

great664:
Thanks fashrobbin1 for this thread

I was trying to flash my Motorola Droid Razr Maxx Xt912 4.1.2 to upgrade it to a custom Rom 5.0, but it couldn't go through, I have bricked it many times but was able to restore it back using Safestraps 3.75, I google and read somewhere that I should install another CWM to be able to port the rom and it should be Bootstraps, but it was mentioned that if you are using safestraps before u should uninstall it so as not to get a bootloop problem , which I did and I downloaded the fucking bootstraps and boot into Recovery, then Backup so I can restore if anything happens, after backup I decide to reboot and it shows "ENCRYPTION UNSUCCESSFUL" I should reset the phone which I did so many times and it stills there.....

I have downloaded and flash with the firmware using RSDLite and Utility tool by Maccgroff but still same.

Is there a way I can be able to fix it? Can I install apk (safestraps) so I can restore from my previous backup? Is there a way to install the app on bricked phone?

PS: if you have the motorola Droid razr Maxx xt912 can you please upload your firmware for me to try it too.

Thanks for reading my long sermon


Dani4tech or Nafikowa can you pls help me with your Motorola firmware to restore my phone? Pls Man

am interested in your phone kindly leave me with a mail so that we can get it fixed

EHITZ:
Please all gurus in the house help me. Since I gave my samsung galaxy grand neo to samsung care for fixing, it has since developed a problem, the screen responds at the slightest touch, and even clicks randomly on the things I did not intend to click on. In the same vain, it takes some part of the screen a hard time to respond. Help

maybe the ROM they installed has faults

donxaqius:
Pls my tecno f6 got bricked I scatter file to wake it up pls help..

try wiping the phone and see if it will power on if not, then start preparing for spflash tools flashing

UncleDeeee:
I upgraded my galaxy s3 without backing it up and now the network has disappeared. Anything I can do?

you have to look for the stock ROM bro check if you cab get1 here http://galaxys3root.com/galaxy-s3-rooted-stock-roms/

amhackdee:
My camera was given this erroe "Camera can't connect" I do the restore factory settings, that does help.
Yesterday I notice that it has disappear finally. I checked the application thinking if it was disable or so, it can't be found there also.
How do I fix this?

your camera disappeared?? change the rom that the best thing the camera.apk is corrupt

abbeyboyz54:
Samsung Galaxy S3 is not showing screen lock....please help me

try wiping the phone

AwesomeRomeo:
Pls how can I unbrick my HTC T528w that was bricked by ifonts?(barbie.ttf) It hangs on boot logo, its rooted and it can boot to recovery. USB debugging was not enabled. I didn't back up the stock rom b4 it bricked. I have downloaded a custom rom for d device. Pls help. Tanx.

is the cwm on zip format?? or scattered??

Tolu95:
my gionee m2 is been brick..nt powerin up atall...d fone is in jellybean but d rom i want to download is in kitkat.....n pls help me out

the preloaded is corrupt that y follow the new method I posted you will have your device fixed