Last year, I bought the Huawei switch S5700-28C-SI from Thunder-link.com, can’t configure the screen display, luckily, the technical of their company kindly told me the solved ways and commands. Hope can help you.

Setting the number of rows displayed on a screen
Run the screen-length screen-length [ temporary ] command in the user view or user interface view to set the number of rows to be displayed on a screen.

You must specify temporary when running the command in the user view. The configured value takes effect only on the current VTY user interface but does not take effect on the next login on the same user interface or login on other VTY user interfaces.

The default number of rows to be displayed on a screen is 24.

Setting the number of columns displayed on a screen
Run the screen-width screen-length command in any view to set the number of columns to be displayed on a screen.

The default number of columns to be displayed on a screen is 80. Each character is a column.

[size=13pt]More blog:[/size]
Huawei Low-end Switches Boot Upgrade For BOOTROM
Huawei Low-end Switches Upgrade The APP System
Cisco-Router-IOS Configuration Backup And Recovery
Optical attenuation is too large lead to ONU recovery failure

Q: What is the difference between HG8245 and HG8245A and HG8245T?
A: You can visit the below rink to know more...


Q: What is the difference between GPON HG8245 and ONT HG8240/ ONT HG8240F?
A: The main difference is HG8245 comes with WiFi, HG8240/HG8240F not.

Q: Do you have HG8245 with C+ Module?
A: No, we only have some HG8010H NOT with C+ module.

Q: Do you have 4*GE version HG8245?
A: No, there is only 4*FE version, actually the GPON speed 2.5Gbps after splitting, even just 1:32, average each user can only get 78Mbps, also on the customer side 100Mbps is enough for normal use. For certain customer who really need super high speed internet, you may consider to use HG8010H which has 1*GE, or in some commercial areas, using Huawei MDU, like MA5626, MA5612 which has multiple GE ports.

Q: Do you have documentation of HG8245?
A: Yes, you may contact Huanetwork sales person.

Q: My HG8245T is with SC/APC, Huanetowrk HG8245 is SC/UPC, do I have any problems?
A: No, it is going to be fine, just make sure you use the cable with SC/UPC connector, Huanetwork also offers SC/UPC connector.

Q: Do I need to have 2 cable for HG8245, one in one out?
A: No, one cable is enough, the GPON is using WDM technology, which only
require one cable.

Q: Can I use HG8245 with other brand OLT?
A: Huanetwork not suggest, as the understanding between different vendor on TR069/OMCI may different.

Q: Does HG8245 support routing function?
A: Yes.

Q: Does HG8245 support battery back?
A: No.

More related:
[url=http://www.thunder-link.com/solution/Configure-10GE-Services-in%20-WDM-OTN-Networks.html]Configure 10GE Services in WDM OTN Networks[/url]
Situation When Carry 10GE Traffic On OSN3500
FTTX Leased Line Solution For Enterprise
How To Reset Huawei OLT MA5600T Series Equipment Password
MA5600T Backup Redundant of Configuration Smart Link

Only the LS-S5324TP-SI-AC and LS-S5328C-EI-24S support the enhanced load balancing mod

Run:
system-view
The system view is displayed.
Run:
interface eth-trunk trunk-id
The Eth-Trunk interface view is displayed.
Run:
load-balance { dst-ip | dst-mac | src-ip | src-mac | src-dst-ip | src-dst-mac }
The load balancing mode of the Eth-Trunk is set.
NOTE:
The S5300SI and S5300LI use the parameter src-dst-ip in the HASH algorithm for load balance regardless of whether you configure this parameter.
Run:
system-view
The system view is displayed.
Run:
load-balance-profile profile-name
A load balancing profile is created and its view is displayed.
Run:
l2 field [ dmac | dport | l2-protocol | smac | sport | vlan ] *
The load balancing mode of Layer 2 packets is set.
Run:
ipv4 field [ dip | dport | l4-dport | l4-sport | protocol | sip | sport | vlan ] *
The load balancing mode of IPv4 packets is set.
Run:
ipv6 field [ dip | dport | l4-dport | l4-sport | protocol | sip | sport | vlan ] *
The load balancing mode of IPv6 packets is set.
Run:
ipv6 field [ dip | dport | l4-dport | l4-sport | protocol | sip | sport | vlan ] *
The load balancing mode of IPv6 packets is set.
Run:
quit
Return to the system view.
Run:
interface eth-trunk trunk-id
The Eth-Trunk interface view is displayed.
Run:
load-balance enhanced profile profile-name
The load balancing profile is applied.
NOTE:
The preceding load balancing modes apply only to known unicast traffic. To configure the load balancing mode for unknown unicast traffic, run the unknown-unicast load-balance { dmac | smac | smacxordmac | enhanced }command in the system view. Only the S5300EI, S5310EI, and S5300HI support load balancing configuration for unknown unicast traffic.

More related:
Huawei Low-end Switches Boot Upgrade For BOOTROM
Huawei Low-end Switches Upgrade The APP System
Cisco-Router-IOS Configuration Backup And Recovery
How To Reset Huawei OLT MA5600T Series Equipment Password

The huawei MA5683 has 13 slots, respectively:
6 business card slots
2 main control board slots
2 GIU upstream board slots
2 power supply board slots
1 interface board slots
MA5683T: the 0 ~ 5 slots are for configuration service board, 6 ~ 7 slots are for the main control board. Can be equipped with two pieces of main control board, to meet the main function.

The fan of MA5683T is on the left inside the box , use the blow mode.
The MA5683T device provides 0 to 12 total of 13 single board slots, chassis configuration characteristics, as follows:
0 ~ 5 slots are for service board.
6, 7 slots are for the main control board slot. A case can be equipped with two main control board, realize the main function.
8, 9 slots are for GIU uplink.
10, 11 slots are for power board.
12 slot is for interface board.
The similar products, please click below links:
MA5600
MA5680T[T_p599.html]MA5600T

More related:
Huawei OLT MA5600T Series Equipment Upgrade Instructions
Huawei OLT MA5600T Series Equipment Upgrade Instructions
How To Reset Huawei OLT MA5600T Series Equipment Password
MA5600T Backup Redundant of Configuration Smart Link
Application of Time-range In HUAWEI MA5600 Series Equipment

Configure the DBA template on Huawei MA5683T
MA5680T (config) #dba-profile add profile-id 10 profile-name NMS Type1 FIX 1024 - webmaster
MA5680T (config) #dba-profile add profile-id 11 profile-name PPPOE Type4 MAx 102400 —–PPPOE
MA5680T (config) #dba-profile add profile-id 12 profile-name IMS Type3 Assure 1024 Max 10240 —–IMS
MA5680T (config) #dba-profile add profile-id 13 profile-name IPTV Type4 MAx 102400 —–IPTV
MA5680T (config) #dba-profile add profile-id 14 profile-name ZHUANXIAN Type3 Assure 5120Max 102400 —— line
MA5680T (config) #dba-profile add profile-id 15 profile-name VPN Type3 Assure 5120 Max 102400 ——VPN
The similar product: MA5632, MA5669, more information, please click here.

More related:
Huawei MA5683T Platinum Line FAQ
Huawei MA5683T Gold Line FAQ
Huawei OLT MA5600T Series Equipment Upgrade Instructions
Optical attenuation is too large lead to ONU recovery failure