Mercedes Benz GL450 for kids working perfectly

Condition: Almost brand new.

Price :105k

Call or whatApp 0-90-99-28-4402.

Little baby worker

Recommended age: 6-36 Months

Price: 12,000

VTech pull and push puppy is the ideal toy for your kids.

It helps them identify colours, numbers,body parts, sounds and music.


Price: 5,500

Call or whatApp 0-90-99-28-4402

Butterfly Zig Zag Sewing Machine JH8190S
Get this butterfly electronic multi-functonal zig zag embroidery machine with led pilot lamp, quick winding bobbins, free arm, variable needle positions for precise top stitching. It also has a four step buttonhole and an easy turn dial pattern selection.
Machine comes with 12 built-in stitches including a four-step buttonhole stitch width and length adjustment
A drop feed for free motion sewing is provided
Included in the pack is an operational manual for easier understanding of its functions.

Best offer price: N53k

Call or Whatapp 0-909-928- 4402

BeatBo dancing toy is the best plug for your kiddies learning. What are you waiting for? It's recommendable for kids between the ages of 0-3 years. Toy has lots of content like recording phrases, dancing, identification of colours, alphabet and numbers . Kids can also record and playback their own customized songs.

Our Declutter Price: N5k
Top Online Stores: N28k

Welcome to Nigeria number 1 top toy shop.

We stock and sell various types of kids toys and fashion wears at rock bottom pocket friendly prices.

Below are some of the available items.

Visit daily to view our posts and buy these nice gift toys for your kids at great bargain prices.

You are most welcome. I sell the book but its currently out of stock. I should have stock in 2 weeks time , i will update you on availability@lookyz

lookyzy:
thank you for the explanation.pls how do I get this Natalie bray book?

Armhole shape may vary a little according to shape and posture of the figure, the depth of the armhole depends on
Bust line where the armhole is drawn while its size depends on the (bust line) width, the height ie slope of the shoulder and the position of the shoulder point.


***Solution***

Step 1
* find the Top arm (TA) (Shape)

Top arm is the measurement taken round the fullest part of your arm about 10cm below the shoulder.(google to know
the exact position)

TA = 1/3 of your bust measurement

example 1/3 of 80 = 26.6 approx. to the nearest even number 28cm by proportion reference "Basic principle of cut and fit"by Natalie bray

TA = 28cm.


* Find your sleeve width

TA + 5cm (Ease)

NB: Sleeve width is always 5cm larger than the Top Arm

28+5= 33

Sleeve width = 33cm


Armhole depth therefore

1/3 of sleeve width

1/3 of 33 = 11 appro. to the nearest even number 12cm by proportion reference "Basic principle of cut and fit"by Natalie bray

Depth of the crown = 12cm

Armhole size:.

Depth of the crown + Top arm = 40cm.


NB:if your top arm + the depth of the crown fit tightly this might be due to the following reasons:-


* Inaccurate measurement on your client- always take accurate measurement its very important

* You have a squarer shoulder.

See diagram using this link https://web.facebook.com/lucimac4u/?view_public_for=338038126624726


* By raising the SP (Shoulder point) 1-1.5cm please be sure of the figure.

* By reducing the Sp (recommendable for professional)

* By making the armhole wider across (recommendable for professional)


** Please Do not forget to share, questions are also welcome**

Hi guys am lucimac, a pattern drafter / seamstress.


By the grace of God, i will be sharing with us some important Tips in pattern drafting using Natalie bray method, if we properly follow these tips we will end up drafting patterns with a fitted outfit.

I QUOTE “Sewing is not about competition or a race to finish.Yes, we all have deadlines in life but when it comes to sewing, you should rather not rush or compete. If you are learning to draft pattern or sew, take your time to learn.


Here are some BASIC BODICE BLOCK ACRONYM


CF - CENTER FRONT



CB - CENTER BACK



NP - NECK POINT



SP- SHOULDER POINT



UP- UNDERARM POINT



SL-CB - SLANTED CENTER BACK



SL.-CF -SLANTED CENTER FRONT



CH-P - CHEST POINT



T-BL- TRUE BUST LINE (BUST POINT)



X-CHEST - ACROSS CHEST



X-BACK - ACROSS BACK



HP -HIP POINT



H.L - HIP LINE



W.R - WAIST REDUCTION



L.W.L - LOWER WAIST LINE



WP -WAIST POINT



W.L -WAIST LINE



BST.L - BUST-LINE



BL - BACK-LINE



SH.L- SHOULDER-LINE



TA -TOP ARM





CHEERS!!

Hot sales @ 20% off the previous price

Brand: Two lion sewing machine head.

Condition: Brand new and coupled

Old price @ 16000

Serious buyer contact me on 09099284402.

@SWTeee Thanks for going through our post,stay tuned as more tips will come up soon

Here is the link https://docs.google.com/forms/d/e/1FAIpQLScOFb-BtyukBoWFLzdioUDkzl02Enyp0toie_opKy_zVzU-7w/viewform

Continuation of some sewing machine issues and there possible solution.

My dear fans we sincerely apologize for our inability to complete these tips as promised due to our busy schedule, but never mind as soon as we have time we will always post tips as promised. Thanks for your understanding.

C “Why does my sewing machine needle break, bend or get blunt while in use?”
The picture below shows a typical sewing machine needle front and side view.



Your sewing machine needle is the most used part, Sewing with a bent needle is extremely dangerous as the needle may break when using the machine. ***While using sewing machine needle ensure that flat side of the needle is placed on a flat surface, then check the distance between the needle to make sure that the flat surface are even.

(1) Flat side (2) Needle type marking
-Correct needle

(3) Parallel space (4) Flat surface

- Incorrect needle

Do not use a bent needle.

(5) Flat surface
Correct needle

Follow these tips below to prevent your needle from getting bent

1. Do not pull the fabric off from the sewing machine to avoid the needle from bending/breaking.
2. Insert the sewing machine needle properly
3. Use the right needle size and type.
4. Avoid sewing close to a zipper.

D “Why do I get the occasional skipped stitches?”

A lot of factors can cause fabric to skip stiches while sewing.

1. Working with a thin or stretchy fabric.
2. Thread Tension not so tight.
3. Sewing machine needle is either bent or not properly fixed.

Ways to avoid these issues mentioned are as follows

1. Change the needle immediately with the right needle size and type suggested needles as follows violin needle DP*5 90/14,100/16 and 110/18 or HA *1 80/12, 90/14, 100/16 respectively
2. Use interlining, stiffener or tissue paper.
3. Change the thread tension
4. Apple pressure on the foot.

A. “Why is there Noise while working with my sewing machine?”

There are a number of factors responsible for a sewing machine noise during operation.
Noise usually indicate a mechanical challenge within the machine parts such as an improperly coupled, loosed part or presence of a foreign object inside the machine e.g a needle or loose screw within the machine.

Follow these steps below to troubleshoot and stop the noise before your machine gets DAMAGED

1. Stop the machine immediately and turn off the power into the machine.
2. Check if the machine is due for service.
3. Check the needle. Replace needle if necessary.
4. Check the lint in the needle plate or bobbin area and ensure no dirties in place.
5. Check the race-hook area with a pin tip or needle using brush. You can also blow it to remove any available dirt.
6. Ensure that no thread is wrapped up on the lever, no loose screw inside the machine and also no thread in the shuttle as this could cause noise too.
7. Finally lubricate your machine with sewing machine oil ( article on how to lubricate your sewing machine coming soon.......).
If all these maintenance tips provided fails, kindly call a qualified sewing machine technician


B. “Why is my sewing machine running slowly or on low speed?”

Poor cleaning and lubrication are the major reason why your sewing machine will run slowly or on low speed, also if your foot controller is becoming weak it tends to be free, you will only be exceptional if your machine has sintered bronze bearings which does not need regular oiling.

Follow these steps below to troubleshoot why machine is running slowly or on low speed.

1. Ensure that the machine is properly cleaned.
2. Oil your sewing machine regularly especially after use each day.
3. Check if bobbin winder is still engaged.
4. Check your foot controller and adjust speed.

@Deflorence Thanks for dropping by to read our post and your interest on the contest, Yes the giveaway is still on, draw winner will be contacted via email. Goodluck!

Before we start discussion on common sewing machine issue and the solution. we will like show show you a typical sewing machine head, its parts and functions.







Parts of a Sewing Machine and functions


1. Spool pin: It is fitted on top of the arm to hold the reel.

2. Thread guide: It holds the thread in position from the spool to the needle.

3. Tension disc: The two concave discs put together with the convex sides facing each other the thread passes between the two. The
tension of the thread is adjusted by a spring and nut which increases or decreases pressure

4. Take up lever: It is a lever fitted to the body of the arm. It is used for up and down motion, feeds the thread to the needle and tightens the loop formed by the shuttle.

5. Needle bar: This is a steel rod to hold the needle at one end with the help of a clamp. Its main function is to give motion to the needle.

6. Bobbin case: This moves into position to catch the top thread and form the stitch as the needle is lowered into the bobbin chamber.

7. Presser foot: It is fixed to the presser bar to hold the cloth firmly in position when lowered.

8. Presser foot lifter: A lever attached to the presser bar for raising and lowering the presser foot.

9. Stitch regulator: [/b]This controls the length of the stitch.

10. [b]Bobbin winder: A simple mechanism used for winding thread on the bobbin.

11. Fly Wheel: When this is made to revolve, it works the mechanism of the motion.

12. Clutch or Thumb Screw: This is in the center of the fly wheel and it engages and disengages the stitching mechanism.

13. Slide Plate: [/b]A rectangular plate, which facilitates the removal of the bobbin case without lifting the machine.

14. [b]Needle Plate or Throat Plate: A semi-circular disc with a hole to allow the needle to pass through it.

15. Feed dog: This consists of a set of teeth fitted below the needle plate. It helps to move the cloth forward while sewing.

16. Face plate: A cover which on removal gives access to the oiling points on the needle bar, presser bar and take-up lever.

17. Spool pin for bobbin winding: Spool of thread is placed on this at the time of bobbin winding.

Still stay tuned......................................

[b]COMMON SEWING MACHINE PROBLEMS[/b]

Issues faced while using a sewing machine can be quite frustrating and that is why we have picked out some common ones to discuss about:

a.Why is there Noise while working with my sewing machine?

b.Why is my sewing machine running slowly or on low speed?

c.Why does my sewing machine needle breaking, bend or get blunt while in use?

d.Why do I get the occasional skipped stitches?

e.Why is my thread bunching up?

f.Why are loops forming in between stitches?

g.What do I do to prevent frequent thread breaks ?

h.Why do I get non uniform or uneven stitches?

i.Why is my stitching wrinkled or fabric puckering?

j.Why can’t I thread my sewing machine?

k.Why does the needle un-thread when I start to sew?

Have you experienced any of these issues mentioned above?

Stay tuned as we discuss possible solutions..................

Your suggestions and contributions are also welcome.

Dear Argonn

Apply using this
https://web.facebook.com/Sewing-Machine-880262642127048/
or
https://docs.google.com/forms/d/e/1FAIpQLScOFb-BtyukBoWFLzdioUDkzl02Enyp0toie_opKy_zVzU-7w/viewform
or
http://promong.com/lucimac/contest.html

Good luck!

We will be giving free Tips/possible solutions how to best use your sewing machine.

CHOICE OF SEWING MACHINE FOR A BEGINNER

I have noticed over time when people want to buy a sewing machine this particular question always comes to mind “which sewing machine is the best to buy”.

Note: All sewing machines are equally built rugged as to serve its purpose. The most import thing to consider when buying a sewing machine is availability of its spares in the local market as well as aftersales support by experienced service Technicians. This consideration is important as breakdowns are inevitable.

Yes it’s true!
As part of our anniversary celebrations, we (Luci-mac) will be giving out brand new sewing machines to our esteemed fans.
All you need to do is to refer that special person who you think deserves this wonderful gift (multiple referrals is allowed).

Refer now: https://docs.google.com/forms/d/e/1FAIpQLScOFb-BtyukBoWFLzdioUDkzl02Enyp0toie_opKy_zVzU-7w/viewform


Our mission: To awaken your creativity by providing the right Fashion Tools/machines