Ivan18888888888:
Pls . Who can help me with a really good bmw electrician on the island

Cvesta:
What is the best car scanner (personnal use) one can buy for for a bmw E90

Cc chukel
Cc drakeskull
Cc erico2k2

chukel:

Icarsoft
Inpa

Cvesta:

Thanks

chukel:
reach out if you need inpa

Ivan18888888888:
So nobody has a good bmw electrician on the island ? And we’ll call this a bmw car forum ?

MOTIONTECH:
where are you on the island

Ivan18888888888:


I’m everywhere on island . As far as the referral is a professional One . I am open to meet at any given location.

Note : Only extreme professional bmw electrician is needed pls !!!

lahome:
I need a very good BMW mechanic in Lagos/Festac area

lahome:
I need a very good BMW mechanic in Lagos/Festac area

mayor2013:


Which of the Beemar do you wish to fix

lahome:



X6

mayor2013:


You can call the garage on 08165520837 between working hours

chukel:

Icarsoft
Inpa

dante4845:
Hi everyone.. nice to be here, i drive an accord cl7 (manual tranny) but wish to upgrade to a bmw.. there is this e46 325ti (pic is attached) bm direct toks deal i saw for 1.3m, i test drove it and the problems i found was it didn't accelerate well and when i put it on D and remove my leg frm the brake, the car will be jerky until i press d gas pedal wch actually don't respond well untill i have accelerated far enough.. when in neutral, the engine will be jerky. Aside these issues, the car is very clean.

1) what could be the issue?
2) can it easily be solved?
3) how much is the 2.5l m54 engine?
4) can i swap the 2.5l to a 3.0l in the future if i choose to?

muhamm3d:
Good morning brothers. Please I’m about to buy a BMW 550i GT , 2012 model. Please are there reservations to the v8 engines of bmw or I should proceed. I like the car gan but I don’t want to carry something my mind will be shaking when I’m inside. Please your opinions will be really helpful. Bless y’all

HeavenlyBang:


Please avoid the V8. Was garbage until the TU revision in 2014.

Much better off with the N55.

yungboss:


1)Check the coils, plugs, fuel filter etc. It could be any of the sensors too. You could easily scan the car to put the issues in proper perspective.

2) possible. Check all the items stated above...

3)

4) 100% possible. You'll be getting yourself a little fast car.

daylay7:
Hi everyone,
I want to know if there is anything like over supply of fuel by the nozzle causing incomplete combustion. The issue is, the rate of fuel consumption has now tripled and the engine doesn't fire down and sometimes misfire.

What could be the cause of this? The mecho I gave was saying over supply of fuel by the nozzle. If that is true. Where can I get a clean tokubo nozzles of that specifications?

Thanks.

mafioso47:
Check the quality of your Engine airfilter , check your MAF sensor

daylay7:


The MAF sensor is good but the airfiloter is fair. Could that be the reason for line 1 of the engine not working? I have grown tired of the issue and I spent alot on it as well. So, I have changed it to inline 6 engine (double vee).

benefitzte:


MAF(Mass Air Flow) = Air Flow Meter

dante4845:
Hi everyone.. nice to be here, i drive an accord cl7 (manual tranny) but wish to upgrade to a bmw.. there is this e46 325ti (pic is attached) bm direct toks deal i saw for 1.3m, i test drove it and the problems i found was it didn't accelerate well and when i put it on D and remove my leg frm the brake, the car will be jerky until i press d gas pedal wch actually don't respond well untill i have accelerated far enough.. when in neutral, the engine will be jerky. Aside these issues, the car is very clean.

1) what could be the issue?
2) can it easily be solved?
3) how much is the 2.5l m54 engine?
4) can i swap the 2.5l to a 3.0l in the future if i choose to?