Jummymine:
Hello,please who is selling this door handle here?

visaclick:
what's the point, you got the job already, client said he will connect with you. spoil another man's own to better yours so hope you are happy now. Maybe the bidder who dropped that quotation isn't on nairaland to even give reason why he needed those materials and he will be there wondering why client never got back to him. Smart one

FEGEITOK:


I just got your quote, see picture below:

sethtsadopp:


Thanks plenty sir. How can I get across to you (or him)?

Hezbola:
Please help, where can I get door handles, the long pull back type..

baaliyah:


Oga, you are spamming this thread with your advert. Can you imagine doing this hip of sands and stones twice on the same page. Ridiculous.

gentlesoul83:


Here is teak wooden door and frame. Frame 5k teak door 11k. Location ojodu berger lagos. See picture.

gabbytabby:
Haa 50k ke them don take your head make paro my brother teak door and frame was 7.5k when I did the 2018 project.

diordaves:


I didn't know that teak doors are available for cash and carry to be honest. I normally make mahogany doors or Sapele wood doors. The outcome can be anything from 50k. Getting hold of teak wood instead mahogany is something I'm now willing to explore going forward. Getting teak, weather dry it proper to prevent warping and then make to doors could turn out cost effective.

gentlesoul83:

For the mahogany door, is it with the frame and door with finishing you get for 50k? Or just door alone

michlins:
you need just 3 lengths of channels. The quotation is way too much. What's the location of the job

UC92:

Why not 4 lengths of channels?
Don't like cut and join on tank stands.

michlins:
at four lengths and 25ft, you will have an excess of about 10ft on at least three lengths of the channels. What do you do with such waste?

Joining channels is never a problem, with good welding, it's as good as new.

cash1115:
First contract of 2023, thank you jesus

UC92:

Prefer having full lengths of 37/38ft for increased pressure.

hslbroker2:
Buy hardwood (2x2, 2x3, 2x4, 2x6, 3x4, 1x12) buy iron rod (8mm, 10mm, 12mm, 16mm, 20mm local and TMT) payment on delivery,thanks for your patronage,

God bless you all

Call or whatsapp 091-32123240.

michlins:
as a country,we produce little or nothing but love waste way too much. A storey building is between 23-25ft excluding parapet but you will want to go all the way to 38ft. What is the need if not to waste the resources and put pressure on the available resources.

Anyways, it's all profits for the welder if you go all in.

Attached is the ideal height of tank stand in comparison to any building. If you observe, the bottom of the tank stand is higher than the walls and parapet which are the highest point of the house. The shower heads which are the highest point user of the water is lower than the bottom of the tank stand still. You will have all the pressure you need. Everything else is just a waste.

These things are pure physics. It's just that we think we can get more by doing more but it doesn't work like that

diordaves:


Of course these things are pure physics.

Do you appreciate why public water towers are elevated so high? See attachments.

You will get pressure at 25ft like you said, but the pressure is optimal only when the tank is full. At half tank or lower half tank you experience significant pressure drop. In some situations, once you turn on the tap in the kitchen when someone are having their bath, you experience a drop in water pressure.

Experience has shown that the sure banker height for home use is at 40ft for duplex and four flats (storey building).

Jummymine:
Hello,please who is selling this door handle here?

ollykay619:
Please house step tiles or long span
0.45. 050 or 0.55

Na kobo kobo project

ollykay619:
Please house step tiles or long span
0.45. 050 or 0.55

Na kobo kobo project