isangjohnson:

Sorry Sir, I don't have cells for sale now.

ubreeze:
Baba, I need Ur number. We need to talk ASAP abeg.

Ijeoma660:


I think it's generic. Because the web and mobile interface are different hosts and different OEM from inverter make

chymer:


@Valto, you be Man. I referred someone from Kebbi State to you, based on how people speak good of your batteries here

He made the payment on Monday and the battery was delivered today (4.4kw).

Do keep it up.

I would have been disappointed if it didn't turn out well. Even when I've not dealt with you personally. People's testimonials here gave me all the assurance.

Thank you for being truthful.

Drgreatone:

Pls wud love a picture and where u got it?

Drgreatone:

Does ur wifi module work for all types of inverter or its specific to urs?

Ijeoma660:

jonescosmos:
NOTE:
Voltronics Inverters Wifi Dongles are OEM Specific.

Felicity has reconfirmed that if the Model Code 089 of your WIFI Dongle is not the same with the one on the attached picture, It will not work with Felicity Inverters.

I learnt this the hard way in 2022 when someone on this platform sold me almost 60pcs of Wifi Dongles which were not compatible with Felicity despite making it clear that I needed Felicity Wifi Modules. The was that they didn't even know what brand of Inverter the module they were selling is used for. It took me almost a year to sell off those modules even below cost price after I discovered they were for MUST Inverters. I still have some quantities left.



There's nothing special about the model code that you should mask it, you can mask your QR Code but the model code tells us which OEM brand the Module is compatible with. Secondly, no one can add your module once you have added it to your own account. unless you delete it from your account. Even if someone manages to hijack your QR Code and adds it to their account, Felicity Wifi Technicians can recover it from anywhere it's been linked, you only need to prove that you are in possession of it and have a verifyable receipt of purchase.

osayuwamwen:
Pls is it advisable to top with distilled water at this level of gauge

Sapiosexuality:
Okay I see. My battery and inverter are SAKO. A LiPo4 200ah 5160wh battery and a 24V 3.5kva Hybrid Inverter. I contacted the company directly and they were able to send it from Lagos to my location. I got my panels from Fouani. 4 555w Jinko Solar Panels.

I think Fouani and Gennextechnologies dot com are legit online sources for solar systems. I think from my little understanding so far Felicity, Sako, SRNE, Wellion are some of the legit companies but where you buy them is more important.

odimbannamdi:
Hello guys, please I need some advise

My church's mixer (in picture 1) got damaged by high voltage and we are now making plans to have it fixed.

However, we are worried about the incident re-occurring and possibly taking out other appliances as well, so we are considering getting a stabilizer.

Please, which stabilizer and specs can work with the mixer, those 2 Ahuja amplifier in picture 2 (couldnt get their specs) and the 2 Yamaha amplifiers (in picture 3, with name plate of specs in picture 4)

HeavenlyBang:
We don finally enter rainy season proper.

Na trenches be this for solar walahi. My setup isn't able to add more than 50% charge to my 4KWH battery in a day for the past few days, especially since I'm off-grid and there's rarely NEPA light anyway.

If this persists, I'll need to add an extra panel to my string.

Valto:
get a 10kva servo stablizer. or better still get 63A adjustable voltage regulator, set acceptable voltage to be from 170v to 230V. that way, once light suddenly go higher than 230v, it cuts off supply. since na church things i can give one for free.

odimbannamdi:
Hello guys, please I need some advise

My church's mixer (in picture 1) got damaged by high voltage and we are now making plans to have it fixed.

However, we are worried about the incident re-occurring and possibly taking out other appliances as well, so we are considering getting a stabilizer.

Please, which stabilizer and specs can work with the mixer, those 2 Ahuja amplifier in picture 2 (couldnt get their specs) and the 2 Yamaha amplifiers (in picture 3, with name plate of specs in picture 4)

easyyoke:


This adjustable voltage regulator sometimes delay before tripping off. I have seen it rise to 250V for few seconds before tripping off when it was told to trip at 235v. So getting a proper stabilizer will be his better bet

easyyoke:



Bro, did you get your Jinko panel from Foauni of recent…. All their stores have been saying they are out of stock. Which store did you get the panel

Ooreofegrace:
@dollarnaira.. Original jinko panels received.
It was a pleasure doing business with you 🤝.

Valto:
get a 10kva servo stablizer. or better still get 63A adjustable voltage regulator, set acceptable voltage to be from 170v to 230V. that way, once light suddenly go higher than 230v, it cuts off supply. since na church things i can give one for free.

easyyoke:


This adjustable voltage regulator sometimes delay before tripping off. I have seen it rise to 250V for few seconds before tripping off when it was told to trip at 235v. So getting a proper stabilizer will be his better bet

samnaija:
Good morning, guys. Pls who can recommend a good battery less hybrid inverter. Purely for pumping machine use. And affordable thanks.

easyyoke:


Bro, What is the current amount of total solar panels you have and what brand?

isangjohnson:
I used boaster to start a 12v hybrid inverter for a client this morning. The lvd shut down the system last night but the inverter refused to wake up when the sun comes up in the morning.
When I checked the settings, the inverter lvd was at 12v and I've already set the bms low voltage cutoff to 2.5v and I confirmed it.
What could make the inverter not to wake up?
Does anyone have this experience?

isangjohnson:
I used boaster to start a 12v hybrid inverter for a client this morning. The lvd shut down the system last night but the inverter refused to wake up when the sun comes up in the morning.
When I checked the settings, the inverter lvd was at 12v and I've already set the [b]bms low voltage cutoff to 2.5v [/b]and I confirmed it.
What could make the inverter not to wake up?
Does anyone have this experience?