Yinkash100:
Thanks I'll retry tomorrow

Hope you coated your mesh inside a dark room? Its very important.

Yes. i've not got d chance to retry it

God bless you @o.p,how i wish someone can be nice enough to teach me how to make invitation cards

irynterri:
God bless you @o.p,how i wish someone can be nice enough to teach me how to make invitation cards

invitation card na graphic work na .

I should have helped here but d software we'll use are little bit complex. All about manipulation

Yinkash100:


invitation card na graphic work na .

I should have helped here but d software we'll use are little bit complex. All about manipulation

okay dear..thanks

onismate:
for the transfer paper, sorry because I don't have pictures of them and presently am still in NYSC orientation camp but the one we use alot is opaque because its very good and brings out a nice job . Opaque is N150 for white and for coloured is N200. The price depends on the location. but its far cheaper in Onitsha, Lagos and some other states. Please note that if you use a bad heat transfer paper, it can damage your printer.. Another thing you have to note about the paper is that the one for white that is N150 is meant for white clothes and coloured (dark) for coloured clothes.
And if you are going to get an ink jet epson printer now, please don't go for epson r230, go for the higher ones like the epson work force . All these machines are far cheaper abroad from N25k and N50k. But here in Naija, they will be telling you N120k.

Hi Sir, concerning the printer, which of the Epson work force printer do you think is the best from Experience considering the transfer paper. I Browsed online about Epson workforce printers & I was overwhelmed & overloaded with the informations of the different models & their features.

I want to take advantage of the ongoing promotions to get it at a discounted price online. Thanks

Lordtrillion:


Hi Sir, concerning the printer, which of the Epson work force printer do you think is the best from Experience considering the transfer paper. I Browsed online about Epson workforce printers & I was overwhelmed & overloaded with the informations of the different models & their features.

I want to take advantage of the ongoing promotions to get it at a discounted price online. Thanks

hmmmm.. from what I browsed, I feel any of the workforce is good. I can't categoriticaly tell you about any of the best because I haven't used any. I am only planning to go for one of them .

onismate:
hmmmm.. from what I browsed, I feel any of the workforce is good. I can't categoriticaly tell you about any of the best because I haven't used any. I am only planning to go for one of them .

Ok, thanks. I also have another question. Concerning the Heat Press, what's the best size to go for? The Seller whom Chizin referred me to buy from calls it A4 Size. I guess that's the local name its called. I will like to confirm if its the equivalent of 15*15 or 16*20 as its known Online coz I will be travelling down soon to Onitsha to buy it. Thanks

Lordtrillion:

Ok, thanks. I also have another question. Concerning the Heat Press, what's the best size to go for? The Seller whom Chizin referred me to buy from calls it A4 Size. I guess that's the local name its called. I will like to confirm if its the equivalent of 15*15 or 16*20 as its known Online coz I will be travelling down soon to Onitsha to buy it. Thanks

The A4 size is good. I dont know about the online stuff you saw. since you are going to Onitsha, you will see the sizes and choose from the one you want

onismate:
The A4 size is good. I dont know about the online stuff you saw. since you are going to Onitsha, you will see the sizes and choose from the one you want

Ok, thanks

can somebody help with a video

Op, am keenly following ur thread and am impressed and i hv learnt so much here inwhich i hv started undergoing practicals of it. But my difficulty here is using water and foam to wash off d layer dat will gv way for printing. No matter hw hard i tried, it doesnt washoff making it unable to print. Though it do printed out well on mesh after sunning it. Is there any chemical dat helps wash it off well and neat, and also saves time? Urgent reply pls, cos d practical is on progress...

Jasper14:
Op, am keenly following ur thread and am impressed and i hv learnt so much here inwhich i hv started undergoing practicals of it. But my difficulty here is using water and foam to wash off d layer dat will gv way for printing. No matter hw hard i tried, it doesnt washoff making it unable to print. Though it do printed out well on mesh after sunning it. Is there any chemical dat helps wash it off well and neat, and also saves time? Urgent reply pls, cos d practical is on progress...

I guess u left it in the sun for too long that is why its taking u time. no chemical that I know of now. Please reduce the time u allow it to be in the sun

onismate:
I guess u left it in the sun for too long that is why its taking u time. no chemical that I know of now. Please reduce the time u allow it to be in the sun

alright thanks, i will try again. But can i get ur whatsapp contact? so dat i can send u pics of my practical, mine is 80-39387128. I reside in onitsha incase u are around.

Jasper14:

alright thanks, i will try again. But can i get ur whatsapp contact? so dat i can send u pics of my practical, mine is 80-39387128. I reside in onitsha incase u are around.

Pm me

onismate:
Pm me

hv done dat already.

Jasper14:

hv done dat already.

I have replied u

Op, another question is dat, if it is a must to coat in a very dark place or just in absence of sunlight in a room dat is luminous? secondly, if i use tiny black character to write something, will it be visible enough when i print it?

Jasper14:
Op, another question is dat, if it is a must to coat in a very dark place or just in absence of sunlight in a room dat is luminous? secondly, if i use tiny black character to write something, will it be visible enough when i print it?

your first question .... it's done in the absence of sunlight.
second question... it's better your text characters are very bold so it could print clearly. if they are too tiny, it will print but one can't see it clearly

Jasper14:
Op, another question is dat, if it is a must to coat in a very dark place or just in absence of sunlight in a room dat is luminous? secondly, if i use tiny black character to write something, will it be visible enough when i print it?

1.A luminous room is ok... It musnt be dark. But there must not be any sun rays gettin in. UV rays from sunligth would ruin the emulsion. Make it a luminous room with no ligths on.

2.Whatever thin line you use... Make sure the Print is sharp. I mean it must be very black. Dont print faded artworks. Print with those printer with powder kind of ink.

Jasper14:

alright thanks, i will try again. But can i get ur whatsapp contact? so dat i can send u pics of my practical, mine is 80-39387128. I reside in onitsha incase u are around.

@ Jasper14, am currently residing in Onitsha, here is my number 80-33622-560 you contact me. I will help you out.

Op, can u categorically tell me how long (time specific) it do take u to wash off d coated area before printing, cos i been trying to wash it off for a whole day, yet it couldnt wash off even when i only sun it for 30secs.

Dat was also my problem. I havnt been chanced to retry cos m in sch now. Though i bought my materials along.
on my way to becoming a master

If you want to learn the Plastic kind of print. I can get you the machines. Its very easy compared to screen. Fast and easy. You can contact me for Plotting Machine and heat pressers.
.
Here www.nairaland.com/2555332/need-plotter-heat-transfer-machines

Chizin:
@ Jasper14, am currently residing in Onitsha, here is my number 80-33622-560 you contact me. I will help you out.

Hi Chizin, thanks for the help on the Heat Press procurement. I really appreciate
I'm currently in need of a printer, Epson Wf-7110 precisely. I Couldnt source for it in Onitsha after buying the heat press coz of d protest last week. Incase you know any store that has it in stock where I can buy it, pls let me know. Thanks

Lordtrillion:

Hi Chizin, thanks for the help on the Heat Press procurement. I really appreciate
I'm currently in need of a printer, Epson Wf-7110 precisely. I Couldnt source for it in Onitsha after buying the heat press coz of d protest last week. Incase you know any store that has it in stock where I can buy it, pls let me know. Thanks

congrats my brother.. and big ups chizin ... I really like ur spirit. it seem u are based in Asaba. maybe each time I come for holiday I can be shifting jobs to u

Lordtrillion:

Hi Chizin, thanks for the help on the Heat Press procurement. I really appreciate
I'm currently in need of a printer, Epson Wf-7110 precisely. I Couldnt source for it in Onitsha after buying the heat press coz of d protest last week. Incase you know any store that has it in stock where I can buy it, pls let me know. Thanks

You are welcome, to be franck with you I dont know much about this Epson. Am currently using my DI machine which I bought early this year for N300,000. But, there is one HP printer I have been using before buying this. I think you can start with that, I bought that one N36,000 then, but I dont know the current price now and the different this and my current one is that it prints on a particular Heat Transfer Paper.

onismate:
congrats my brother.. and big ups chizin ... I really like ur spirit. it seem u are based in Asaba. maybe each time I come for holiday I can be shifting jobs to u

Thanks bro, will be really nice but I don't base in Asaba, I base in Abuja/Niger State though. Thanks all the same & I wish you all the best in your endeavours

Chizin:
You are welcome, to be franck with you I dont know much about this Epson. Am currently using my DI machine which I bought early this year for N300,000. But, there is one HP printer I have been using before buying this. I think you can start with that, I bought that one N36,000 then, but I dont know the current price now and the different this and my current one is that it prints on a particular Heat Transfer Paper.

Aiit, no problem Sir. Pls, what Model of HP Printer is it Sir & hope its output print is very good for a start. Thanks

Lordtrillion:

Aiit, no problem Sir. Pls, what Model of HP Printer is it Sir & hope its output print is very good for a start. Thanks

Call me around 11am tomorrow, by then I will be in office.