whao, this forum is a big family, although I couldn't track both together but I still enjoy d abs3 and I really appreciate ur quick response boss, viva fta

@ Greetings to all the gurus in the house pls I need help , I have two 8in1 discq switch " pls gurus how can I connect the two to make it two 16 in 1 switch because it has been discussed here before, Pls I need to Solution. Thanks viva FTA.

.

odilibe:
hexadecimal binary file editor..edit keys in binary file..
http://mh-nexus.de/en/downloads.php?product-HxD

is key editing in this format more advantageous? that is, what is the significant advantage compared to normal base?

HIGHESTPOPORI:
Max tv and Thunder tv for movies now open on multi tv tp 11595V29999

o can't c any green there

drandonzero:
Hi lights of bindesliga on MBC pro sport 2. today I managed to combine, 5e, 3w and 7w all on one 90cm dish.

Good testimony, kudos. Hope others will learn from this, that it is very possible to bring these 3 birds down on one dish. You don't track dishes online,get practical friends.

kudos4u:
@ugotuf I reside in Lagos and I have 1m dish size with strong decoder SRT4922A,i will like to nail 3diff frequency that you have on your dish(the one you snap), from where joytv is facing, where will I face my dish? And how can I easily get does frequencies without stress?

@ugotuf no response to what I ask you

kudos4u:
@ugotuf no response to what I ask you

If you read my past posts on that 3-in-1 setup, saw the pix and have the frequencies for the 3 birds, you are good to go then.
STEPS:
------
1. (Standing behind your dish)From your multitv or amos@17' position, move your dish to your right towards where you see the sun setting in the evenings, input the frequency of star movies plus (11150/V/45000)on ABS3@3'W and track till you hit green. Lock your dish there and blind scan after you have gotten the best quality.

2. Get another lnbf, locàte SES5@4.8' on your receiver and input this frequency (12015/V/29951), place your lnbf below the primary to the left of the arm and play around there till you hit green, then secure your lnbf with a binding wire or any rope of your choice and blind scan after you have gotten the best quality.

3. Get the 3rd lnbf, locate Eutel7'W and input (11559/V/27500). This time you will have to play above the primary lnbf with your skew at 9 o'clock till you hit green. Tweak till you get 63% to avoid cracking of the mbc stations and blind scan.

Goodluck and let your next post here be a positive testimony.

ugotuf:

If you read my past posts on that 3-in-1 setup, saw the pix and have the frequencies for the 3 birds, you are good to go then.
STEPS:
------
1. (Standing behind your dish)From your multitv or amos@17' position, move your dish to your right towards where you see the sun setting in the evenings, input the frequency of star movies plus (11150/V/45000)on ABS3@3'W and track till you hit green. Lock your dish there and blind scan after you have gotten the best quality.

2. Get another lnbf, locàte SES5@4.8' on your receiver and input this frequency (12015/V/29951), place your lnbf below the primary to the left of the arm and play around there till you hit green, then secure your lnbf with a binding wire or any rope of your choice and blind scan after you have gotten the best quality.

3. Get the 3rd lnbf, locate Eutel7'W and input (11559/V/27500). This time you will have to play above the primary lnbf with your skew at 9 o'clock till you hit green. Tweak till you get 63% to avoid cracking of the mbc stations and blind scan.

Goodluck and let your next post here be a positive testimony.

barman,give Ugotuf 2 bottles of origin!!!lols

odilibe:
hexadecimal binary file editor..edit keys in binary file..
http://mh-nexus.de/en/downloads.php?product-HxD

What does this mean?

Dear ugotof,
I think I need your help.
I'm a noob in this department. I just got a 40in screen. I would love to watch all those great channels on my new slate.
I have sought help on different platforms and I've been asking questions but it seems people are not ready to help.
Note that I don't mind DIY or pay someone to do it. Though I'd prefer DIY
I'm aware that the decoder that comes in-built the tv is no good for good channels like Sport channels and the likes. Someone mentioned I get a CAM module for the TV but it seem it's not the best way to go

Can you please tell me the options. I would like something that doesn't involve anything above 1m dish.
Note that I am ready to experiment.
Currently I am watching GOTV on UHF, thanks to the RF connection from the Decoder in the Family room.

I stay in Osogbo, Osun State.

Thanks in advance,

#GodBlessNigeria

good day, has anyone try to combine Eutelsat7.3w mbc as (secondary) to NSS7 west (primary) on 1meter dish? merry christmas.

ben1daEbiri:
barman,give Ugotuf 2 bottles of origin!!!lols

Hahahahahahahahahaaaaaaaa

DatechMan:
Dear ugotof,
I think I need your help.
I'm a noob in this department. I just got a 40in screen. I would love to watch all those great channels on my new slate.
I have sought help on different platforms and I've been asking questions but it seems people are not ready to help.
Note that I don't mind DIY or pay someone to do it. Though I'd prefer DIY
I'm aware that the decoder that comes in-built the tv is no good for good channels like Sport channels and the likes. Someone mentioned I get a CAM module for the TV but it seem it's not the best way to go

Can you please tell me the options. I would like something that doesn't involve anything above 1m dish.
Note that I am ready to experiment.
Currently I am watching GOTV on UHF, thanks to the RF connection from the Decoder in the Family room.

I stay in Osogbo, Osun State.

Thanks in advance,

#GodBlessNigeria

If you are a total Newbie in this dept., you will most likely need the help of an experienced installer before you can receive ALL those channels in the setup above. But because you prefer a DIY method, you will have to buy an mpeg4 or HD receiver, befriend an installer, watch him do his thing, ask questions and read the threads on how to track a satellite on this rich forum and get practical. it's not as hard as people make it look.Your zeal, passion and enthusiasm for FTA will drive you to always experiment and vey soon you will be a guru.

akplatnum2005:
good day, has anyone try to combine Eutelsat7.3w mbc as (secondary) to NSS7 west (primary) on 1meter dish? merry christmas.

why not give it a trial

Pls Gurus in the house yesterday i post a question about how to combine two 8 in 1 disqc switch to 16 in 1 disqc switch still no help yet , pls house help with solution on how to go about Viva FTA.Thanks.

Who knows where one can get the power board for 4922A decoder?

Hello house theirs this satellite i received around 75° east because is below Eutelsat 70b east and a little bit above apstar sat 76°east, So the sat have just two frequency which are 11460v2198 for Lesotho network broadcast and the second frequency is 11596v30000 for channels like fox sports 1 & 2 ,Dubai one, cinema TV, nollywood tv ,smile tv aljazera news & documents tv etc, so please who else has got this satellite or that knows the name of the sat

ojesymsym:
Who knows where one can get the power board for 4922A decoder?

if you are in Lagos go to Alaba

graphicicon:
IS THIS CONNECTION OF THIS 2 DISEQC SWICTH AND 2 WAY SPLITER WORK ON STRONG DECODER? @ODILIBE AND BLESSONMAK, GEORGE D

IF THIS WORKS, PLS SHOW ME HOW TO CONNECT ON STRONG DECODER DISH SETTING

@ graphicicon where can I buy this two way splinter in Nigeria , because I have two 8 in 1 Diseqc switch that I want to combine to make 16 in 1 switch.

Moyin4king:
Hello house theirs this satellite i received around 75° east because is below Eutelsat 70b east and a little bit above apstar sat 76°east, So the sat have just two frequency which are 11460v2198 for Lesotho network broadcast and the second frequency is 11596v30000 for channels like fox sports 1 & 2 ,Dubai one, cinema TV, nollywood tv ,smile tv aljazera news & documents tv etc, so please who else has got this satellite or that knows the name of the sat

The satellite is ABS 2 @75 East.This is now hosting TING Package including ATN Channel from Tanzania.This is where they migrated to from Amos5.Can you confirm all channels currently fta.

ugotuf:
Hahahahahahahahahaaaaaaaa

You want more?

kd10:
@ Greetings to all the gurus in the house pls I need help , I have two 8in1 discq switch " pls gurus how can I connect the two to make it two 16 in 1 switch because it has been discussed here before, Pls I need to Solution. Thanks viva FTA.

Try to use a 22KHZ switch it might solve your problem.I tried it at my setup but the receiver could not respond to both switches.

@ugotuf
Thanks for the step by step guide.
Please can I use QSAT or should use strong.

rrsat media/rrsat feed1 & feed2...now on azerspace@46east 4049/30000 C band....encryption biss/using previous old biss @amos 5-17east

SULIEMAN3:
is key editing in this format more advantageous? that is, what is the significant advantage compared to normal base?

..the post was only targeting spark 7162 model receiver...linux

Golden media..
srt 2020 hd...
amiko alien2+
fulan...
sab unix..
etc..
(P) can only be edited with hex editor!

ben1daEbiri:
You want more?

Bros. Keep the origin make I for see leg take wake reach house, give me some cold can malt there with some kilishi. .

Guys, spent d whole day battling IS 20 in my medium-size backyard. Used 3900H22222 & 3739H26590 but all was in vain though. But I wanna ask; if I have about 7m(22feet) infront of my dish b4 my neighbour's fence, can it probably obstruct IS 20 signal? My dish is 2.4m pan; neighbour's fence top is same level wth ctr of my dish. pls yr opinion, thanx

ugotuf:

Bros. Keep the origin make I for see leg take wake reach house, give me some cold can malt there with some kilishi. .

lols...what bird have you been hunting recently and were are based at?

ben1daEbiri:
lols...what bird have you been hunting recently and were are based at?

Currently working on that 20' W on 1mtr. I will feed you back once I'm done.Lagos.

kibukila:


Try to use a 22KHZ switch it might solve your problem.I tried it at my setup but the receiver could not respond to both switches.

This is one aspect that even gurus somethings find it a bit confused,i think you should get another 4*1 switch,connect the "output" of the 1st 8*1 switch to "LNB1" of the new 4*1 switch....also connect the "output" of the 2nd 8*1 switch to "LNB2" of the 4*1 switch and finally,connect the "output" of the 4*1 switch to your receiver....toggle your diseqc settings for 1.0 at 1/4 and 2/4 respectively...hope it helps

ben1daEbiri:
This is one aspect that even gurus somethings find it a bit confused,i think you should get another 4*1 switch,connect the "output" of the 1st 8*1 switch to "LNB1" of the new 4*1 switch....also connect the "output" of the 2nd 8*1 switch to "LNB2" of the 4*1 switch and finally,connect the "output" of the 4*1 switch to your receiver....toggle your diseqc settings for 1.0 at 1/4 and 2/4 respectively...hope it helps

Can u throw more lyt on dat toggling aspect....
dnt really understand hw to set it on my decorder