Flyingman:


I pulled out these codes
P0716 Input/turbine speed sensor A Circuit Range
P0325 Knock Sensor 1 Circuit Bank 1
P2229 Barometric Pressure Sensor
P0135 O2 Sensor Heater Circuit Bank 1 Sensor 1
P0498 Evaporative Emission System Vent Valve..
P2185 Engine Coolant Temperature Sensor.

Cleared all codes and car moves all right. But I feel everything isn't alright. Should I replace any other sensor.??

Flyingman:


@gazzuz @luvinhubby and all other experts in the world. Come to my rescue please as my account is going into negative.

My car still isn't shifting properly especially when am about to go into motion. Highway drive shift smooth but when I slow down and want to accelerate. It fails to move into the next gear and just revs until I pull to N and back to D (not all the time).

I noticed one evening my car revs close to 4000rpm and my power steering reservoir was bubbling oil and overflowing and steering stiff. Checked the trans oil and it was completely dry. My mech confirmed there was a leakage through the trans cooler hose and also advised I change the inner cup/upper arm which he said contributed to gear oil leakages and was the cause of the slippage.

Did a complete oil change and got the hose replaced aswell with other parts mentioned. Did a scan, the P0716 input/turbine speed sensor code disappeared but the rest remains and issue persist(still failing to shift to next gear when am accelerating)

Please assist, all the mechs I have met so far seem to be clueless. Any recommendation in Abuja will be highly appreciated. 2008 Honda Accord

shekone:
Good morning nairalanders, My gear sometimes doesn't shift it' just revs until the rpm goes high then it shift with a strange sound n the car vibrates and the power steering oil gets dry almost within a week. 2004 Honda accord

steering leak, usual culprits are pressure pipe, or steering rack. You need to sit car on a pit to know which (or both )

Transmission issues: check oil level, scan for errors is it a 4cylinder or a v6?

fitzfrankses7:
Please lovely nairalanders my CRV 1999 recently increased its fuel consumption after changing the rear camber bushings and welding the broken exhaust pipe . What should I do to curb my car's thirst?

coolb:
please kindly assist with this information, I want to knw if my 96 Accord ( Bullet ) can assess Obd 1 or Obd 2 scanner connector....
Cc:
Gazzuzz, Luvinhubby, Nas00, Sienna

GAZZUZZ:


Obd1 on that particular vehicle.

coolb:
. sir I got this on line that " Every car manufactured after 1996 has Obd2 connection.......true or false

the guys who made ur car didn't get the memo on time

One4me:
@Gazzuzz, @Luvinboy @Sienna and @Sultaan. and other gurus in the house...Please Help.


this is URGENT

This is the situation of the Car:
The Car is Automatic Gear, Nissan Almera, 1998 - 2000 model.
The Car can drive well in forward gears but put it into reverse, Mbanuu. It will just be raising and not moving at all in reverse.

Gear Oil and other likely problems have been checked and ruled out. What else can l do.

Please MASTERS in the house, what could be the problem?

Can anyone give me an idea of what the problem is?
What needs to be repaired and likely cost of this repair?
Even somewhere trustworthy that it can be taken to for repair.

I thank una for advance.

coolb:
. sir I got this on line that " Every car manufactured after 1996 has Obd2 connection.......true or false"



this car is American spec 1998 Accord Bullet.........waiting for your response Sir.

GAZZUZZ:


panelbeater must have messed with your o2 sensors, run a scan to check. If in lagos call 08033910382 for a free scan and diagnosis

One4me:


@Gazzuzz:

I dont understand, what do you mean by 'check gear lever'? What do l check in the stick (apparently it is just used to shift backward or forward).
be specific now or are you just taking a piss?

Since it engages in all forward gears, (using the same gear cable, l assume that means the cable cant be cut), what should l check in the Cable?

It is only the Reverse gear that does not engage. What can make the Forward gears to be okay while reverse gear does not engage?

Please explain more so l can understand what you are saying.

Thanks for responding.

GAZZUZZ:


I'm used to posting image links but I get banned immediately I post them, so I will send pics when it is convenient

Acceptance4:
Acceptance4 :
Good evening to all in the house,please I need your help badly, my 2003 ACURA TL when idling bouncing up and down or surges and it get worst when you drive the car upto 30min plus on dead stop reach between 1000rpm and 2000rpm..

I did scan and I get. ....
1[p0113)-IAT SENSOR high voltage
2[p0453)--EVAP FTP SENSOR HIGH INPUT

please my mechanic has done all he can yet no solution insight still, but the scan guy said that I need to change fuel tank pressure sensor and that if it doesn't still solve it that my brainbox will need to be change. ..I'm so tired of the car. please help, advice from pros and any other person experiencing such issues please please please.

Acceptance4:
Acceptance4 :
Good evening to all in the house,please I need your help badly, my 2003 ACURA TL when idling bouncing up and down or surges and it get worst when you drive the car upto 30min plus on dead stop reach between 1000rpm and 2000rpm..

I did scan and I get. ....
1[p0113)-IAT SENSOR high voltage
2[p0453)--EVAP FTP SENSOR HIGH INPUT

please my mechanic has done all he can yet no solution insight still, but the scan guy said that I need to change fuel tank pressure sensor and that if it doesn't still solve it that my brainbox will need to be change. ..I'm so tired of the car. please help, advice from pros and any other person experiencing such issues please please please.

DonBobes:
House how much is honda accord 2002 AC compressor?

luvinhubby:


10k max.

coolb:
please all the guru in the house should kindly assist me b4 this car will send me back to my village, the fuel consumption is very outrageous (high) mechanic has serviced d injection, have replaced coil wire's, plugs and nosstle.. just 3days now the checks light flash on mottion. accord 1996 model

Cc:
Gazzuzz, Luvinghubby, Sienna, Nas00 and Kingreign

xcitedjay:


Lol @ "..b4 this car will send me back to my village". Car problems can really be disturbing.

The flashing check engine light should be a sign that one or more of your engine's cylinders are misfiring. And since what you've done has ruled out an ignition problem then you might have a compression problem.

coolb:
. Appreciate your response sir, have changed 4plugs, replaced nusstle, ignition coil and serviced injector........Sir I don't understand d compression problem?

xcitedjay:


The compression problem might be as a result of worn piston ring, leaking valves or cylinders etc

coolb:
. Appreciate your response sir, have changed 4plugs, replaced nusstle, ignition coil and serviced injector........Sir I don't understand d compression problem?

brigglez:

Hello, please what transmission fluid will you recommend for honda pilot 2005 and honda crv 2003 respectively.

Thanks.