Dear Eng Enoch Ogaga, I must confes that this your column on Nairaland is very helpfull. I bought a brand new elepaq 1.3kw with 6L fuel but the gen run time only last for 5hrs. I called a gen mech who tweaked it but it made the power fluctuate. So he suggested I buy a bigger capacitor and reduce the running. What is your take on that. He said that approach will make my gen run longer.

obaino4you:
Dear Eng Enoch Ogaga, I must confes that this your column on Nairaland is very helpfull. I bought a brand new elepaq 1.3kw with 6L fuel but the gen run time only last for 5hrs. I called a gen mech who tweaked it but it made the power fluctuate. So he suggested I buy a bigger capacitor and reduce the running. What is your take on that. He said that approach will make my gen run longer.

that too much, at litter on 1.3kva suppose to run a minimum of two hours, now tha capacitor need to be change to 20-24uf, the cap fuel consumption screw need to be tighting.

bigx:
Pls you have any idea how much to replace AVR on Sumec 3000 and how to identify the good one?

the good product on avr is yp, gtb or gbt

bigx:
Pls you have any idea how much to replace AVR on Sumec 3000 and how to identify the good one?

the good product on avr is yp, gtb or gbt, it cost #1000 in bayelsa here

twaintoy:
Don't know the difference between fring noise and iron rubbing iron. But I guess its firing noise

reduce it frm the firing screw under the tank

Baylam:
Where can i get in Lagos??

am not in lagos, am in bayelsa yenegoa

enochogaga:


reduce it frm the firing screw under the tank

Ok. Will try to locate the firing screw and reduce it. Thanks

Well done boss. My carburetor is leaking out fuel.. Fuel hose is still ok. What's the way to go? Thanks

dimco:
Well done boss. My carburetor is leaking out fuel.. Fuel hose is still ok. What's the way to go? Thanks

the cap is overfloating, now this is what u will do, first wat type of gen? if the cap is automatic cap u cannot do anytin about it cos the jet pin as chop, now ur answer to my question will tell me if ur cap is autho.
what is brand or type of gen?

The gen is Sumec firman 2500... Don't know if it's automatic or manual. See attached pic

dimco:
The gen is Sumec firman 2500... Don't know if it's automatic or manual. See attached pic

i think that cap came with gen? that cap is autho , nothing can be done the jet pin as chop,
just change cap

Thank you. Any idea for the cost of an original one and also what might be responsible for the jet pin to wear out?

enochogaga:


i think that cap came with gen? that cap is autho , nothing can be done the jet pin as chop,
just change cap

[quote author=dimco post=45590263]Thank you. Any idea for the cost of an original one and also what might be responsible for the jet pin to wear out?

i must tell u the truth u can get the original cap, i mean the follow come cap, and if u go to workmen to buy the original one {the follow come},
i cant advise u to go and get cap on bengium, except u see where it was loos frm gen for u, and take note original,japan is crested by the side, just go and buy new one if u didt get the begium

bro good day. kudos for your effort here. pls i want to buy a diesel generator. sound proof to b precise minimum of 6.5kva. but i was advised not to buy brand new kus they are all china. i was advised to buy tokumbo made in japan. please is this advisable? and also do all these big companies that sell diesel gen and offer 1yr warranty with servicing, do they sell japanese or chinese? your advise will be very helpful. also can u give me a price range?

cyif2003:
bro good day. kudos for your effort here. pls i want to buy a diesel generator. sound proof to b precise minimum of 6.5kva. but i was advised not to buy brand new kus they are all china. i was advised to buy tokumbo made in japan. please is this advisable? and also do all these big companies that sell diesel gen and offer 1yr warranty with servicing, do they sell japanese or chinese? your advise will be very helpful. also can u give me a price range?

Thanks for contantacting prof of all gen,
now let me start by asking, hope u are aewear, that japan parts are not available in nigerai market? Now the tokumbo engine and they have most goting one all two fault, or the expiring date of that engine as expires or about to, that is why they sell it out very cheap, now if that engine arrive in nigerai, maybe the engin block as fault, is it not the china part they buy to fix it? And not china but the very low grade part,
Broda, workman can hardly tell u this, anytin about tokumbo on mechanical engine, does not last, it will give problem frm the first day u buy it to when u will pack it.
Look at motor car, the cars we buy are they not china? But they last more than the tokumbo.
Bro have been on this for atleast 21 years, am talking to frm servery tokumbo meet up.

If u can make order of new japan product, is ok, but not tokumbo
Go buy ur new china product and enjoy atleast 5-6years free frm mech

Prof...pls i'm looking for a portable good generator to buy..which one do you recommend Sir? I just need a generator dat will power my small freezer,tv,bulb and charging of phone. so which generator shld I go for?, and what is d price range. thanks

Pls sir,i'm a female,i don't ve strength to operate manual Gen..pls reccomend a good small generator I can start with keys. Thanks

obynwanyioma:
Prof...pls i'm looking for a portable good generator to buy..which one do you recommend Sir? I just need a generator dat will power my small freezer,tv,bulb and charging of phone. so which generator shld I go for?, and what is d price range. thanks

the type of fridge pls, or how many litters it is?

obynwanyioma:
Pls sir,i'm a female,i don't ve strength to operate manual Gen..pls reccomend a good small generator I can start with keys. Thanks

As i read ur comment as just smiling in laugh,
I dont realy know how to start, but being the fist female here, i will make sure ur request is satify,
Now i beilive u can operate 1900 i mean the medium one is very soft to start,
But if u need autho start, go get sumec 3000. Thanks

enochogaga, I'm a female now.

Am proud of been an engineer in the making, am proud of you Sir.God bless you and your family.

twaintoy:
enochogaga, I'm a female now.

Ok twaintoy, am with u and u are welcome, just go ahead with ur request

promisengr:
Am proud of been an engineer in the making, am proud of you Sir.God bless you and your family.

Thanks and amen

enochogaga:


Ok twaintoy, am with u and u are welcome, just go ahead with ur request

Made my request known already and u have given a solution, will try it out later.

enochogaga:


Thanks for contantacting prof of all gen,
now let me start by asking, hope u are aewear, that japan parts are not available in nigerai market? Now the tokumbo engine and they have most goting one all two fault, or the expiring date of that engine as expires or about to, that is why they sell it out very cheap, now if that engine arrive in nigerai, maybe the engin block as fault, is it not the china part they buy to fix it? And not china but the very low grade part,
Broda, workman can hardly tell u this, anytin about tokumbo on mechanical engine, does not last, it will give problem frm the first day u buy it to when u will pack it.
Look at motor car, the cars we buy are they not china? But they last more than the tokumbo.
Bro have been on this for atleast 21 years, am talking to frm servery tokumbo meet up.

If u can make order of new japan product, is ok, but not tokumbo
Go buy ur new china product and enjoy atleast 5-6years free frm mech

ok from what u have just said it better to buy a brand new diesel sound proof gen. kus the parts are readily available. and also because it will last longer. please do you no whre I can buy and I will b given after sale service? also a price range

[quote author=cyif2003 post=45662271] ok from what u have just said it better to buy a brand new diesel sound proof gen. kus the parts are readily available. and also because it will last longer. please do you no whre I can buy and I will b given after sale service? also a price range [/quote

Ur location matters, if u are in lag just go to alaba market, but dont know current price now

well done prof for the nice job you are doing.
pls what is the smallest diesel gen set available in the market in terms of output and price?
thank you sir as i expect your prompt response.

Nice thread... Following it like my life depends on it.
Pls my Tiger Gen TG2500 consumes fuel like a lot. Though recently I changed the caburretor and still it the same. It consumed 9liters of fuel in less than 8hours. Secondly I fiddled with the spring in the amatuer arm and didn't know the actual hole where it was before. Thanks

enochogaga:

As i read ur comment as just smiling in laugh,
I dont realy know how to start, but being the fist female here, i will make sure ur request is satify,
Now i beilive u can operate 1900 i mean the medium one is very soft to start,
But if u need autho start, go get sumec 3000. Thanks

Thanks,what about haeir thermocool gen or is sumec better than it?

yeddy99:
well done prof for the nice job you are doing.
pls what is the smallest diesel gen set available in the market in terms of output and price?
thank you sir as i expect your prompt response.

I think is 2.5kv, and 75-80k

grayht:
Nice thread... Following it like my life depends on it.
Pls my Tiger Gen TG2500 consumes fuel like a lot. Though recently I changed the caburretor and still it the same. It consumed 9liters of fuel in less than 8hours. Secondly I fiddled with the spring in the amatuer arm and didn't know the actual hole where it was before. Thanks

That feul consuption is very high, but i didt get it when u say u fiddle with spring in the amatuer, i didt really get u sir,

Now this is what u will do for the consumption, [1]..make sure ur firing is low,
[2]..den thight the feul controller screw. Go to prevous page and see the pic of the screw

enochogaga:


That feul consuption is very high, but i didt get it when u say u fiddle with spring in the amatuer, i didt really get u sir,

Now this is what u will do for the consumption, [1]..make sure ur firing is low,
[2]..den thight the feul controller screw. Go to prevous page and see the pic of the screw

ok. Thanks, will adjust the screw.