enochogaga:


which type of diesel engine?

bily:
Enochogaga

What do you think of converting a petrol Generator to gas?

Can it be done professionally here is Nigeria and what is the cost implication?

What are the advantages/disadvantage of performing these kind of surgery.


Thanks

enochogaga:

we have two adjustment screw, one is located just beside the side cap. The order order one is also at the side of the under of the tank. Just look under the tank. Close to the starter

twaintoy:
Don't think i got this oo. Could you just please, show me a picture of the two screws if possible?

enochogaga:


buy 1000wat stab,and buy century product.
there is noting like avr sucket.
u can know original sumec 950, sumec will crested on top of the tank. not on ticker but on the tank himself

xband:
Please Prof my sumec firman 8800 fpg e2 is so stiff to draw the rope. And the gen is not starting anymore with the key. But it cranks each time I try to start it. Please what do you think is the problem.

enochogaga:

i thought i reply ur request yesterday,so sory if i did not, ok i will try and give u the pic today.

xband:
Please Prof my sumec firman 8800 fpg e2 is so stiff to draw the rope. And the gen is not starting anymore with the key. But it cranks each time I try to start it. Please what do you think is the problem.

dacoolestkc:
prof please will a 2.5kva power a 146litres chest freezer a home theatre a plasma TV fan and bulbs and please is lutian a good product or should I go for Tec ,sumac or elepaq thanks and God bless you

Babaisaac:
well done sir@enochogaga
I just want to know if it possible to use a 2000va stabilizer on the small tiger gen and also what minimum kva gen nd product will u recommend that can power a submerged water pumping machine for home nd a deep freezer, note they might not need to be running at the same time. Tanks in anticipation.

Galaxypoduction:

Thank you.
I finally bought the Sumec SPG 1200. "SumecFirman" was crested on the tank.
Though the engineer that followed me there had to swap parts of this product to make a nice working one.
At the shop, there were 2 sumec Spg1200 remaining. Tested the first one, it was firing more than 240v. My engineer tried to adjust this all to know avail. My engineer later deduced that the fault was from the governor control or something.
They go carry another one, change it but the starting rope winner is not good also, had to swap it. Still, found later that the starting coil is faulty change it(later found that the initial starting coil was ok but misconnected, though settled for the second coil).
In short, it is now working smooth.
I hope it last as being patronized.
Thank you once more Mr. Enochogaga.

enochogaga:

welcome broda.

enochogaga:


yes 2.5kva it can power all the lirted applainces.
Just get elepaq product.

Galaxypoduction:

Thanks.
What causes it to produce more flames?
I notice it's producing more flames.
The first Petrol Pour into it was full tank MIXED with #80(naira oil). Is that what caused it?

drlawizle:


Please how many Kva of generator can power the following for use in a mini-bar:

-2sets of 2hp A.C

-5sets of ceiling fan

-2sets of LED/LCD TVs

-1set of sound system

-2sets of deep freezers

-2sets of standing transparent fridges.

-Normal lights used in clubs and bars...

enochogaga:

if u are to power all listed appliances at thesame time, go ane gett 10hp diesel egine with an alternator of 7.5kva,
but 8000 petro gen can power those 4 fridge, and bulbs

drlawizle:


Bros me I no understand all dis your terminology oh....pls just kindly tell me how many Kva will power the above appliances without patchpatch alternator or what have you...I want to know the Kva dat will power it straight without patchpatch work...Thanx bro.

enochogaga:

u need 7.5kva gen

enochogaga:


I think I have answer ur question

Ttalk:
Mr Enoch you've been doing wonderful job here, please i have 7.5HP diesel engine which i use for fish feed production. But since i used it mainly Saturdays i decided to buy alternator to it to power my two 1HP each pumping machine. One is submersible while the other is surface pump. I hope the engine will be able to power the two pumping machine for 10hours daily together with some energy bulb and one fan.

What type of alternator will be most suitable?

Will the engine power 3 -4 pumping machine in case of near future expansion?

What will be your opinion on this arrangement considering cost, fuel efficiency and durability?

What HP diesel engine will be suitable to power 3-4 pumping machine?

What is the price range of diesel generator that can power 4 1hp pumping machine, new and fairly used?

Do you have idea of pumping machine that requires lesser wattage for 100meter borehole?

enochogaga:

u mean flame of fire frm d exust?. If it is just make sure there is alot of oil to with d fuel,is beta oil is too much dan oil is not enough.
But that flame coming frm the exust,hope is like a coal of fire coming out frm the exust,if it is,is normal,but it will stop.

drlawizle:


Hmmm...bros are you sure 7.5kva will power these appliances without me needing to buy some extra things to boost the gen.....I was thinking of getting a 15-20kva gen which won't need adjustment to be made on it....pls keep it real with me will a 7.5kva do the work without patchpatch to the gen cos money isn't the problem here....

Galaxypoduction:

Thanks.
Yes, the exhaust was like that of coal.
One more thing, it consumes too much petrol, is it because of it is new?

enochogaga:

i thought i reply ur request yesterday,so sory if i did not, ok i will try and give u the pic today.

enochogaga:

am not talking about 7.5kva fuel egine, am talking about diesel engine, u said u dont need patch patch. Then i said go and get 7.5ka sand prove engin.
But let me tel u this. Egine's are rated by hp,then the coile,armesuer(alternator) are rated by kva.
And wat egneer dont get is, is not the coil(alternator) that carries the load,but is the engine that carries the load, so even though u get a engin wit 3.5 hp and the coil side is 10kva, it the engine cant even run.
Now when am telling u to get a gen with 7.5kva. I know th engine rate wil be like minimum of 10hp. Pls if u are not clear with this just call me. If i didt pick is dat am busy in my office,but i will call back.

enochogaga:

no is not because is new, just make sure it does not fire tomuch,and reduce the fuel cosumption screw.