bobojoshua:
Thanks.

graphicicon:
@Emmachile, i have that version of media player in my laptop, it plays but no video display and no audio, it was just counting the seconds of playing status, pls can u do me a favour by recording with either vinsat xv9800 or dsat dx9800 to see the outcome and feed me back, its really give me headeache.

ucheo:
Please wat can be causing my new signal of sp24 to be fluctuating. Comes and goes in a flash

ababanwoke:
guys please I need serious help on how to install my newly acquired recorder stg9800A and a 1.2m pan dish,how can I get sprt24,mbc stations,pls someone should help me,i can add the person on WhatsApp to help me out plsssß guys

Chinedu7:
How to input biss keys on some decoders.
1. SUPERMAX 91001 : Press the menu key. Then press 7799 code for biss key.
2. TECHOSAT 2000 ULTRA 1 : Simply press menu button and press 5400.
3. STARSAT 9700 & 7979 : Simply press menu keys on your remote control, then press 9999 for biss key.
4. STARSAT 2000 HD ACE : Press f1 on your remote control, then press 333 and biss key menu will open.
5. SAMTEL 7000 HD: Simply press OK button, then press "0" and entre your biss key.
6. EL 7999 HD: Press on Menu buttom on your reomote control, then press "7777' four times on your remote control and enter your biss key.
7. BISS CODE FOR STRONG DECODERS:-
Strong products such as SRT 4669XII, SRT 4669X, SRT 4920, SRT 4923, SRT 4922a , SRT 4950, SRT 4950M, SRT 4950H. Simply press 8280 on your remote control and a new screen will pop up. Please, if after pressing, new screen didn't show up, you have to activate the biss key option first. At this point, press 6969 on your remote control and you will be asked for a password, simply press 6969 again on your remote control. After that press 8280 to enter the biss key path. But if biss key option have been activated on your decoder already, then you don't need to go through such a long process. Simply follow this simple steps below:
- Select the channel you want to open.
- Press 8280 on your romote and press OK.
- The Biss Key menu will display.
- Enter your Key
- Press Exit to save setting.
8. BISS KEY CODE FOR QSAT DECODERS.
- press menu on remote contrtol.
- Enter default code which is usually "0000" unless if change by you, then you can enter your own code.
- Try to locate Xcam set up on your decoder.
- If Xcam set up not available or hinden, simply press 1512 on remote control and Xcam set up will pop up automatically. Please note that before you press 1512, make sure you are in area of your decoder where you see things like "Preference, AV, Ethernet Config, PVR Config, Multimedia setting etc.
9. ECHO STAR DECODERS.
- Press menu on your remote control.
- Select system settings
- Press the red button on your control
- Enter 2528
- Enter your keys.
- Press the Red button twice.
- Finally, press OK.
10. AlphaBox X4 decoder. Follow the following procedure :
* Press the menu botton on your remote control.
* Locate settings
* On the setting Bar, enter 2778
* The access control option will display
* or press OK on the Access Control
* Locate CONSTANT.CW Edit and press OK
* Input your biss key ( CAID:SERVICE ID: BISS KEY ). You are one, now enjoy your channels.

Sayaya245:
stand at the back of your dish raise it a little,

abohwun:
1.2m can not give you sp24 get urself 1.8m and above.

THREASHOLD20:

Good morning, pls I nd ur help, after I changed sp24 freq to new one, the signal signal reduced to 30% and when I tried to raise the dish up from the back as u've advised it further reduced to to 22% and as of now it's flashing at that %..What can I do, and I have 2.4m mash dish. Thanks

THREASHOLD20:

Good morning, pls I nd ur help, after I changed sp24 freq to new one, the signal signal reduced to 30% and when I tried to raise the dish up from the back as u've advised it further reduced to to 22% and as of now it's flashing at that %..What can I do, and I have 2.4m mash dish. Thanks

Chinedu7:

You don't need to move your dish rather adjust your lnb, it's just TP change not position change. Return your dish to the earlier position.

larryenob:
it's not general oh mine has been working for long ooh no crack or freeze up-to 2weeks now

almujeebe:
Guys pls I need winners Golden bet frequency pls

Eldorado382:
lost 24hd east signal today are u watching