kiekie1:


Hello Sir, it simply depends on your budget , application , routine maintenance schedule if always available on site "with flooded battery spec" , airy ventilated space for flooded batt gasing ! See video clip below for personal orientation;


https://www.youtube.com/watch?v=GMns62-ZVDc

For procurement, Installation & maintenance,
Contact,
Smartcellglobal services,
081-350-31951

Thank you. Which one do you advice i buy and what are the prices

NiyiOmoIyunade:
Thorough and balanced review of features and pros and cons and masterfully done too.

The only dissent I may have is when people talk about CC waking up earlier and sleeping later at higher voltages - I feel that yes the CC may wake earlier and sleep later but any amps/watts harvested in the wee hours must surely be very negligible - just my untested feelings on the matter.

Thanks and I agree with you.

If I would split hairs, I'd say additional harvest from earlier wake-ups and later retirements afforded by a high voltage may just add up on those 'stubborn' days when the Sun takes forever to effectively "come on stream," leading to prolonged wee hours, and during unusually long and severe overcast periods? But again, that's probably just me.

........
P34c3
.....
...

Trueigbo:


Thank you. Which one do you advice i buy and what are the prices

Hmm... kiekie1, this may just be a strong indication that most guys don't necessarily pay attention to those long ads o.

........
P34c3
.....
...

Trueigbo:


Thank you. Which one do you advice i buy and what are the prices

Ok kindly reach me for detailed briefing Sir;
Smartcellglobal services,
081-350-31951
WHATSAPP::: https:///2348170385620

duwdu:


Hmm... kiekie1, this may just be a strong indication that most guys don't necessarily pay attention to those long ads o.

........
P34c3
.....
...

Haha Sir .. Not really , you might be wrong unless for a newbie here ! We have 24hrs discreet reader's / adherent follower's as an oldie here ... As few type here , most prefer sending a PM or Calling even before sending you cash transfers for supplies ! Individual customer vary tho but we will keep delivering as usual.. Happy vote day Sir

Wow been running on solar alone for the past 4 days now ! It's not really sunny down here today . Astonished to see 60a instantaneous peak from my mppt now before throttling down to 55a due to change in weather"hazy"

GREEN EFFICIENT ENERGY>>ALL THE WAY!!!

NiyiOmoIyunade:
I have a question for the electricity buffs in the house.

A friend is constructing an office complex and his electrical contractor wants to install an RCD/RCCB at the service entrance to protect the whole facility (all personnel and devices downstream of the RCD/RCCB)

In order to 'improve the speed at/certainty with which the RCD/RCCB could respond to a fault and disconnect the supply', he has already jumpered/connected the Neutral and Earth bus bars in the DB with a 16MM cable - this installation is here in Lekki - while I know this practice of linking Neutral and Earth is common practice in North America and even mandated by their electrical code, I am yet to see it done here in Nigeria.

I had raised a similar question previously - what do you think? Should Neutral and Earth ever be linked here in Nigeria (I believe our transformers are star/wye wound and the neutral wire center tapped - dunno if PHCN actually Earths their neutral wire at the transformer)

Does this practice help the performance of an RCD/RCCB in any way?

The office will also have solar power tied in(where I come in ) - I am struggling seriously with wiring the CC Earth terminal to that same Earth bus bar in the DB that already has an AC neutral connected to it.

One of our hybrid sites that has PHCN integrated developed a fault from the grid end that caused the line sensitive system to reject grid supply and troubleshooting brought up a possible neutral fault. I checked up online and saw that a possible reason could be be a broken neutral to earth connection from the source (aka transformer). I went to the change over switch and ran a jumper wire from the neutral bar to a ground cable there. (roadside engineering, i know ) i had to do it to keep the site from going down.

it worked

So i think the neutral to earth is connected normally from the tx side in Nigeria

.

After much thought and some hours digesting IEEE 142-2007, NEC & some British electrical standards, I decided to talk to the electrical contractor to disconnect the Earth to Neutral jumper & leave the Earth unbonded.

As far as I can tell, the only purpose of a Neutral to Earth bond at a local service entrance is to shorten the return path so that an RCD can detect the live vs neutral Amp imbalance faster and therefore trip and disconnect the supply faster. Without the jumper, the fault current would still go to Earth at local facility, travel through Earth to the local transformer Earth and then return to the local service entrance at which point the RCD would disconnect the supply - a longer path to be sure but the objective is still achieved.

Interestingly, the British electrical reference manual seemed to have a Neutral to Earth bond for nearly all the transformer schemes - picture below

mank1234:


qIt's a wrong practice to do local bonding of earth and neutral at customers location for a TT system.

This may be one instance where it worked may not have been best practice except as a strictly temporary fix.

It seems to me you had an open neutral and by jumpering Neutral and Earth, you simply substituted the Earth wire as the return path for current.

By design, the Earth wire should carry no current unless there is a fault condition - all sorts of bad stuff could happen using the zero reference (Earth) as a return path for current on a routine basis.

Trippledots:


One of our hybrid sites that has PHCN integrated developed a fault from the grid end that caused the line sensitive system to reject grid supply and troubleshooting brought up a possible neutral fault. I checked up online and saw that a possible reason could be be a broken neutral to earth connection from the source (aka transformer). I went to the change over switch and ran a jumper wire from the neutral bar to a ground cable there. (roadside engineering, i know ) i had to do it to keep the site from going down.

it worked

So i think the neutral to earth is connected normally from the tx side in Nigeria

NiyiOmoIyunade:
This may be one instance where it worked may not have been best practice except as a strictly temporary fix.

It seems to me you had an open neutral and by jumpering Neutral and Earth, you simply substituted the Earth wire as the return path for current.

By design, the Earth wire should carry no current unless there is a fault condition - all sorts of bad stuff could happen using the zero reference (Earth) as a return path for current on a routine basis.

@bolded.... If that was the case, would i find voltage on the neutral line and no voltage on one of the phases? Cause that's what happened.

Like you reiterated, twas a temporary fix.

My Oga

I was reacting strictly based on the information you provided (my best interpretation of it). Surely, I may be unable to accurately diagnose an electrical fault (from several KMs away and based on just one or two sentences defining the problem ) better than you that was 'live at the scene of the crime' (so to speak)

No offense intended at all.

It is customary in Nigeria to have one or two phases with no voltage feeding in from the PHCN mains - still for the grid to pass power through to an inverter and loads, at least 1 live phase out of the 3 available is required as the source of supply .

Given 1 live phase and no power pass through the next check would be at the return wire (Neutral) - if you were able to substitute the Earth wire as return path and thereby reestablish power, then I inferred that the Neutral was broken/open somewhere in the network esp. if the neutral was presenting as a voltage source.

It could also be that you had a short circuit somewhere within the facility or the phase and neutral touching (e.g. tree branch pushing against power line) somewhere in the grid system.

There are several possibilities, you as the man on site are best placed to diagnose the issues and bring the learnings back to the house.

With electrical faults, my personal preference is to isolate the issue for sure and fix it immediately to avoid further problems downstream.

Trippledots:


@bolded.... If that was the case, would i find voltage on the neutral line and no voltage on one of the phases? Cause that's what happened.

Like you reiterated, twas a temporary fix.

duwdu:

Thanks and I agree with you.

If I would split hairs, I'd say additional harvest from earlier wake-ups and later retirements afforded by a high voltage may just add up on those 'stubborn' days when the Sun takes forever to effectively "come on stream," leading to prolonged wee hours, and during unusually long and severe overcast periods? But again, that's probably just me.

........
P34c3
.....
...

For the first few months, I ran a PV array of about 70V which had much higher current in the line but closer to CC optimization curves. The next two years, I optimised my system by having a PV string of 100V for a charge voltage of 57.2V. While having higher VoC, this system harvested better (despite less promising optimization curve yields).
The current arrangement has 4 panels in a row for a VoC of about 140V. Wakes up earlier and sleeps later (harvest not significant). What is significant however are the harvests during overcast weather and days when panels are dust coated. I get up to 15% increment in harvest. While it might not seem like much, it makes all the difference between waking up to 88% rather than 82%. Or on deep discharge days (82% for me), ending the day on float or absorb at 99%. Over the months and years, that's a lot.

NiyiOmoIyunade:
My Oga

I was reacting strictly based on the information you provided (my best interpretation of it). Surely, I may be unable to accurately diagnose an electrical fault (from several KMs away and based on just one or two sentences defining the problem ) better than you that was 'live at the scene of the crime' (so to speak)

No offense intended at all.

It is customary in Nigeria to have one or two phases with no voltage feeding in from the PHCN mains - still for the grid to pass power through to an inverter and loads, at least 1 live phase out of the 3 available is required as the source of supply .

Given 1 live phase and no power pass through the next check would be at the return wire (Neutral) - if you were able to substitute the Earth wire as return path and thereby reestablish power, then I inferred that the Neutral was broken/open somewhere in the network esp. if the neutral was presenting as a voltage source.

It could also be that you had a short circuit somewhere within the facility or the phase and neutral touching (e.g. tree branch pushing against power line) somewhere in the grid system.

There are several possibilities, you as the man on site are best placed to diagnose the issues and bring the learnings back to the house.

With electrical faults, my personal preference is to isolate the issue for sure and fix it immediately to avoid further problems downstream.

Scene of crime ke...hahahaha. pls no offense taken too. if my statement passed off as such, my apologies pls. We are all here to learn....

Wrt to your statement of atleast 1 live phase needed for the inverter. the system i am talking about is a three-phase system that is designed to lock out grid once any phase is missing and i have since contacted the undertaking that serves that site to come look into the problem, but up till now, over 2 weeks ago "they are still coming" smh

duwdu:


TBH, I'm not a guru either but hopefully the following will address why I chose the GK stable over the MK, as well as the high voltage thingy...

First of all, are you referring to the 48V model of the MK, or that you don't want to do 48V, or that it's not offered at 48V? I'll be surprised if any 48V unit is limited to 1500W, so please check again, you may just be good to go.

I don't want the 48v, my setup is 24v for now. It is supposed to replace the current 24v 1.5kva inverter that I currently use. The 3kva MK series is limited to 1500W irrespective of whether it's 24/48v

duwdu:


Having said that, my primary reason for going the GK route is the several advantages of deploying up to 450/500V DC when properly managed. Among these, are:
1. The charge controller portion should wake up earlier and retire later - gives more harvest/production time;
2. Much smaller gauge wire (so less set up cost) can be deployed over longer distances between the array and the inverter as the effect of the % drop in voltage will be negligible since voltages are quite high to begin with, giving better amps/yield;
3. Of course up to 5 KW of array at high voltage; this can be further optimized with up to 20 panels (250W @ 37 VoC each in a 10S2P config, for example) on just one inverter as I look to grow with it if its durability holds well.

Then there are other things mainly found in the GK series, especially the 5 KW model:
1. Support for Batteryless operation. (I consider this a major factor) ;
2. Detachable display/control panel - for wired remote operation up to 30m(?) away, IIRC;
3. Direct supply to load, even when battery is present; that way one bypasses the inefficiency associated with having to pass power through the battery first to the load even when sufficient solar/grid power is available to directly supply the load; (I don't think this is unique to the GK.)
4. BMS interface is already built in for Lithium batteries;
5. Bluetooth is built in;
6. WiFi interface is built in, although the WiFi Card itself is optional component, which I bought;
6. Latest technology & design from the Voltronic/MPP Solar stable, etc.

...

Cool am sticking with getting the GK series then, please I will be interested in how you finally did your setup:
The wire size and distance to CC, DC breaker specs, other accessories used and how they are connected

duwdu:


The main disadvantage I see with the 5 KW GK is that units cannot be parralled. They have to be used separately.

Hope those help a little.

........
P34c3
.....
...

This is fine by me, I don't think I would need that extension. The up to 4kw in the 3kva of the GK is already more than sufficient for me.

Thanks

In a 3 phase star connected winding (which is what your transformer is), if the neutral terminal were to become ungrounded the neutral will rise with respect to the ground except the loading on the 3 phases is balanced.

The loading is never balanced thus you will find a voltage on it.

Trippledots:


@bolded.... If that was the case, would i find voltage on the neutral line and no voltage on one of the phases? Cause that's what happened.

Like you reiterated, twas a temporary fix.

DISCOUNTED PRICES - NUM 1 ONLINE STORE!!!

USA Magnum inverter 4124 ..... 930,000
USA Deka 210a battery .............190,000

Felicity 200a battery ...................90,000
Ritar 200a battery .......................115,000
Motoma 200a battery ................115,000
Cinemax 200a battery ................115,000
Cinemax 210a battery ................120,000

Morningstar 60a mppt ...............200,000
Morningstar 45a mppt................190,000
Tsm2 display ...............................60,000
Schneider 60a mppt ....................240,000

Battery equaliser 6-48v... 35,000 30,000

Epsolar Epever solar charge controllers
MT50 display ..................................15,000
Epever 12-24v 30a mppt ................50,000
Epever 12-24v 40a 4210N mppt ...........65,000
Epever 12-48v 60a itracer mppt....135,000

Epsolar PWM
30a 12-24v VS3024A .........30,000
45a 12-48v VS4548BN .......70,000
60a 12-48v VS6048AU .......80,000

Fangpusun MPPT
30a 12-24v .............................55,000
60a 12-48v mppt TR victron clone series ..125,000
60a 12-48v outback clone with display.......145,000
80a 12-48v mppt outback clone .................155,000

Must Power Star Light inverters with LCD display
1000w 12v=95k
1500w 12v=105k
3kva(2000w)-12v=115,000
4kva(3000w)-24v=155,000
5kva(4000w)-24/48=240,000
6kva(5000w)-24/48= 260,000
7.5kva(6000w)-24/48= 280,000

Keye 1.2kva/12v(without charger) 13,000
Keye 2.2kva/12v(without Charger) 18,000
Keye pure sinewave series
Keye 800va/12v 45,000
Keye 1.2kva/12v 55,000
Keye 3.5kva/24v 150,000
Keye 3.5kva/48v 150,000
Keye 5kva/24v 230,000
Keye 5kva/48v 250,000
Keye 7.5kva/48v 350,000
Keye 10kva/48v 370,000
Fangpusun 80a MPPT @ 155k
EP Solar 12/24/36/48v 60a mppt(i tracer) solar charge controller @ 135k
EP Solar 12/24v 40a MPPT solar charge controller @ 65k
Trojan 12v 200a J200re USA flooded batteries @ 129k...(limited quantity in stock)
Trojan 12v 205a agm batteries ... 165k
Trojan 6v 315a agm battery.... -------
Trojan 6v 375a agm battery ........ 170k
Trojay 6v 1225a flooded battery...485k
USA Deka 12v 210a .......190k
USA Mnspd 300 DC / AC ..... 50k
Schneider DC SPD ..........30k
AC/DC true RMS Clamp meters
UNI-T 203 ...N 20k
Suoer intelligent-automatic 30A 12V Battery Charger (MA-1230A) .... N 20k
DC display meters 0-30v...N 1600
DC display meters 0-120v..N 2200
ZHC Battery equalizer 12/24/36/48 volts..... 24k
Quanta Amaron 12v 200a vrla battery @ ...125k
Long 200a AGM batteries .... N120,000
Long 150a slim AGM battery..93,000
Long 100a AGM battery ........ 65,000
Long 100a carbon battery ..... 75,000
Superceed Batteries
12v 100ah= 40,000
12v 150ah= 60,000
12v 200ah= 80,000
Maximum power batteries
12v 100ah= 40,000
12v 150ah= 60,000
12v 200ah= 80,000
Double tech batteries
12v 100ah= 40,000
12v 150ah= 60,000
12v 200ah= 80,000
Network batteries
12v 110ah= 50,000
12v 180ah= 70,000
12v 210ah= 90,000
12v 250ah= 115,000
Flames 300w mono .... 47k
Watts meter "kill-a-watt meter" ....9k
Yachi solar panels ;
150w mono panels........@35k
260w mono panels.......@48k "limited stock"
310w mono panels........@59k "limited stock"

340w Solar world mono solar panels .... 78,000
Jinko 340w mono panel............70,000
Jinko 280w mono panel............57,000
Jinko 265w poly panel.............. 52,000
Trina solar 320w mono..............70,000
Trina solar 285w mono..............65,000
Era solar 300w mono.................58,000

DISCOUNTED PRICES ! CALL US NOW !!
Magnum 4348 USA inverter ....@900k
Victron multiplus 3kva 48v .....@600k
Schneider connect 2524..........@550k
Growatts SPF3000 plus hybrid/solar inverter...@295k
Growatts SPF 5000 hybrid/solar inverter... @325k
Canadian 340w mono solar panel"Korean cells" .... Offloading
Canadian 300w mono solar panel... 62,000
Canadian 330w mono solar panel.....@66,000 bulk price
Sunshine solar modules :
130w poly 23000
250w poly 39000
300w Mono 52,000
Quality chinese panels best price:
100w poly 18500
100w mono 19500
150w poly 23000
200w mono 33000
260w poly 35500
260w mono 39000
320w poly 45500

Mercury Industrial Stabilizer available now
10kva Single phase 100,000
15kva Single phase 157,000
20kva Single phase 195,000
30kva Single phase 300,000
15kva 3Phase in/out 195,000
30kva 3Phase in/out 320,000
50kva 3Phase in/out 830,000

Mercury Spirit Plus Hybrid Inverters are available now
2000 Spirit 2kva 120,000
2001 Spirit Plus 2kva 135,000
3001 Spirit Plus 3kva 165,000
5001 Spirit Plus 5kva 220,000
3kva Soho Inverter 185,000
5kva Soho Inverter 265,000
7.5kva Soho Inverter 300,000

BATTERIES
Mercury 1.2kva Inverter 40,000
Mercury 2.4kva Inverter 45,000
Mercury 200ah GEL battery 140,000
Mercury 200ah AGM battery 100,000
Mercury 100ah AGM battery 55,500

LUMINOUS BATTERIES:
Luminous 150AH/12V SMF .... 92k
Luminous 200AH/12V SMF .....115k
Luminous Blue 200AH/12V .....125k
Luminous tubular 220AH/12V..105k

LUMINOUS PURE SINEWAVE INVERTERS:
Luminous 850va/12v hybrid...52k
Luminous 875va/12v Eco.......37k
Luminous 1.5kva/24v Eco.......57k
Luminous 1.5kva/24v Zelio.....75k
Luminous 1.5kva/24v hybrid...80k
Luminous 3.5kva/48v Cruise..180k
Luminous 5kva/96v Cruise ....400k
Luminous 7.5kva/120v Cruise..500k
Luminous 10kva/180v ...........660k
Luminous 15kva/240v.............1m
Luminous 20kva/360v............ ----

BEST PRICES YOU CAN GET ON PRAG PRODUCTS !!!

Prag inverter 1kva 12v ......N65,000
Prag √√√√√ 1.2kva 12v....N70,000
Prag √√√√√ 2kva 24v.......N
Prag √√√√√ 1.5kva 24v....N92,000
Prag √√√√√ 2.5kva 24v....N95,000 "Promo"
Prag √√√√√ 1.5kva 24v....N96_000

Prag Solar inverter 1.5kva 24v....N120,000
Prag inverter 3kva 24v ....N145,000
Prag inverter 5kva 48v...N250,000
Prag inverter 7.5kva 120v ....N410,000
Prag inverter 10kva 180v....N480,000

Prag 4kva 24v wall H ......N240,000
Prag 6.5kva 48v wall H....N350,000


PRAG servo & relay stabilizers ;

-Prag 3kva relay B(95-280v)..N
-Prag 3kva relay E(95-280v)..N
-Prag 10kva servo ..N110,000
-Prag 10kva servo(130-250v)..N115,000
-Prag 12kva servo...N
-Prag 15kva relay(95-280v)...N110,000 "Qty Promo"
-Prag 15kva servo(80-260v)..N220,000
-Prag 15kva servo(130-260v)..N190,000
-Prag 20kva servo(130-260v)...N230,000
-Prag 20kva relay cabinet(95-280v).. N150,000
-Prag 20kva servo(80-260v) ...N330,000
-Prag 30kva servo(80-260v)...N400,000
-Prag 30kva servo(1300-260v)..N380,000


UPDATED FELICITY PRODUCTS PRICELIST!

Felicity Solar panels;
160w mono...........30,000
250w mono...........43,000
300w mono...........54,000
160w poly ............27,000
250w poly ............39,000
300w poly ............50,000

Felicity battery;
200ah .................95,000

Felicity inverters ;
2.5kva 24v.............115,000
3.5kva 24v .............155,000
4kva 48v...................165,000
5kva 48v ...............220,000 ONGOING PROMO N155,000
7.5kva 48v..............340,000

Felicity hybrid inverters ;
800w 12v ............. 125,000
1600w 24v ........... 140,000
2400w 24v ........... 150,000
5kva with pwm .....200,000
5kva with mppt .....230,000

Felicity solar charge controllers 12-48v specs;
30a pwm..............20,000
40a pwm. ............25,000
50a pwm..............30,000
60a pwm..............35,000
40a mppt..............95,000
60a mppt .............120,000

KINDLY HURRY WHILE STOCK LASTS!


Protek 200L solar water heater... N215,000
With 30k , I can offer you a set of pro solar roof mounts to comfortably mount 4 units of 250 to 350w solar panel's including kits like ;
2 qty solar mount rail "4200mm" ,
4 qty rack end clamp,
6 qty mid clamp,
6 qty L feet with rubber & special screw....
Same goes to angle positioning solar kits;
- Adjustable front leg
- Adjustable rear leg
- Rail splice kit
- Grounding lug


WHATSAPP::: https:///2348170385620

*AUTHORISED DEALER PRAGMATIC TECHNOLOGIES*
All our prag products comes with reliable warranty
*AUTHORIZED DEALER INDIAN INVERTERS / BATTERIES ... Luminous PRODUCTS*
All our products come with 1 year Warranty
*AUTHORIZED DEALER SOLAR SHOP LTD PRODUCTS*
All our products come with 1 year Warranty.
For best affordable prices contact,
The number 1 credible online store,
Smartcell Global Services,Lagos Nigeria.
Simply call Sir Frankie "08135031951" for purchase,fast delivery and waybills .. Thanks !!

kiekie1:
DISCOUNTED PRICES - NUM 1 ONLINE STORE!!!

USA Magnum inverter 4124 ..... 930,000
USA Deka 210a battery .............190,000

Felicity 200a battery ...................90,000
Ritar 200a battery .......................115,000
Motoma 200a battery ................115,000
Cinemax 200a battery ................115,000
Cinemax 210a battery ................120,000

Morningstar 60a mppt ...............200,000
Morningstar 45a mppt................190,000
Tsm2 display ...............................60,000
Schneider 60a mppt ....................240,000

Battery equaliser 6-48v... 35,000 30,000

Epsolar Epever solar charge controllers
MT50 display ..................................15,000
Epever 12-24v 30a mppt ................50,000
Epever 12-24v 40a 4210N mppt ...........65,000
Epever 12-48v 60a itracer mppt....135,000

Epsolar PWM
30a 12-24v VS3024A .........30,000
45a 12-48v VS4548BN .......70,000
60a 12-48v VS6048AU .......80,000

Fangpusun MPPT
30a 12-24v .............................55,000
60a 12-48v mppt TR victron clone series ..125,000
60a 12-48v outback clone with display.......145,000
80a 12-48v mppt outback clone .................155,000

Must Power Star Light inverters with LCD display
1000w 12v=95k
1500w 12v=105k
3kva(2000w)-12v=115,000
4kva(3000w)-24v=155,000
5kva(4000w)-24/48=240,000
6kva(5000w)-24/48= 260,000
7.5kva(6000w)-24/48= 280,000

Keye 1.2kva/12v(without charger) 13,000
Keye 2.2kva/12v(without Charger) 18,000
Keye pure sinewave series
Keye 800va/12v 45,000
Keye 1.2kva/12v 55,000
Keye 3.5kva/24v 150,000
Keye 3.5kva/48v 150,000
Keye 5kva/24v 170,000
Keye 5kva/48v 170,000
Keye 7.5kva/48v 350,000
Keye 10kva/48v 370,000
Fangpusun 80a MPPT @ 155k
EP Solar 12/24/36/48v 60a mppt(i tracer) solar charge controller @ 135k
EP Solar 12/24v 40a MPPT solar charge controller @ 65k
Trojan 12v 200a J200re USA flooded batteries @ 129k...(limited quantity in stock)
Trojan 12v 205a agm batteries ... 165k
Trojan 6v 315a agm battery.... -------
Trojan 6v 375a agm battery ........ 170k
Trojay 6v 1225a flooded battery...485k
USA Deka 12v 210a .......190k
USA Mnspd 300 DC / AC ..... 50k
Schneider DC SPD ..........30k
AC/DC true RMS Clamp meters
UNI-T 203 ...N 20k
Suoer intelligent-automatic 30A 12V Battery Charger (MA-1230A) .... N 20k
DC display meters 0-30v...N 1600
DC display meters 0-120v..N 2200
ZHC Battery equalizer 12/24/36/48 volts..... 24k
Quanta Amaron 12v 200a vrla battery @ ...125k
Long 200a AGM batteries .... N120,000
Long 150a slim AGM battery..93,000
Long 100a AGM battery ........ 65,000
Long 100a carbon battery ..... 75,000
Superceed Batteries
12v 100ah= 40,000
12v 150ah= 60,000
12v 200ah= 80,000
Maximum power batteries
12v 100ah= 40,000
12v 150ah= 60,000
12v 200ah= 80,000
Double tech batteries
12v 100ah= 40,000
12v 150ah= 60,000
12v 200ah= 80,000
Network batteries
12v 110ah= 50,000
12v 180ah= 70,000
12v 210ah= 90,000
12v 250ah= 115,000
Flames 300w mono .... 47k
Watts meter "kill-a-watt meter" ....9k
Yachi solar panels ;
150w mono panels........@35k
260w mono panels.......@48k "limited stock"
310w mono panels........@59k "limited stock"

340w Solar world mono solar panels .... 78,000
Jinko 340w mono panel............70,000
Jinko 280w mono panel............57,000
Jinko 265w poly panel.............. 52,000
Trina solar 320w mono..............70,000
Trina solar 285w mono..............65,000
Era solar 300w mono.................58,000

DISCOUNTED PRICES ! CALL US NOW !!
Magnum 4348 USA inverter ....@900k
Victron multiplus 3kva 48v .....@600k
Schneider connect 2524..........@550k
Growatts SPF3000 plus hybrid/solar inverter...@295k
Growatts SPF 5000 hybrid/solar inverter... @325k
Canadian 340w mono solar panel"Korean cells" .... Offloading
Canadian 300w mono solar panel... 62,000
Canadian 330w mono solar panel.....@66,000 bulk price
Sunshine solar modules :
130w poly 23000
250w poly 39000
300w Mono 52,000
Quality chinese panels best price:
100w poly 18500
100w mono 19500
150w poly 23000
200w mono 33000
260w poly 35500
260w mono 39000
320w poly 45500

Mercury Industrial Stabilizer available now
10kva Single phase 100,000
15kva Single phase 157,000
20kva Single phase 195,000
30kva Single phase 300,000
15kva 3Phase in/out 195,000
30kva 3Phase in/out 320,000
50kva 3Phase in/out 830,000

Mercury Spirit Plus Hybrid Inverters are available now
2000 Spirit 2kva 120,000
2001 Spirit Plus 2kva 135,000
3001 Spirit Plus 3kva 165,000
5001 Spirit Plus 5kva 220,000
3kva Soho Inverter 185,000
5kva Soho Inverter 265,000
7.5kva Soho Inverter 300,000

BATTERIES
Mercury 1.2kva Inverter 40,000
Mercury 2.4kva Inverter 45,000
Mercury 200ah GEL battery 140,000
Mercury 200ah AGM battery 100,000
Mercury 100ah AGM battery 55,500

LUMINOUS BATTERIES:
Luminous 150AH/12V SMF .... 92k
Luminous 200AH/12V SMF .....115k
Luminous Blue 200AH/12V .....125k
Luminous tubular 220AH/12V..105k

LUMINOUS PURE SINEWAVE INVERTERS:
Luminous 850va/12v hybrid...52k
Luminous 875va/12v Eco.......37k
Luminous 1.5kva/24v Eco.......57k
Luminous 1.5kva/24v Zelio.....75k
Luminous 1.5kva/24v hybrid...80k
Luminous 3.5kva/48v Cruise..180k
Luminous 5kva/96v Cruise ....400k
Luminous 7.5kva/120v Cruise..500k
Luminous 10kva/180v ...........660k
Luminous 15kva/240v.............1m
Luminous 20kva/360v............ ----

BEST PRICES YOU CAN GET ON PRAG PRODUCTS !!!

Prag inverter 1kva 12v ......N65,000
Prag √√√√√ 1.2kva 12v....N70,000
Prag √√√√√ 2kva 24v.......N
Prag √√√√√ 1.5kva 24v....N92,000
Prag √√√√√ 2.5kva 24v....N95,000 "Promo"
Prag √√√√√ 1.5kva 24v....N96_000

Prag Solar inverter 1.5kva 24v....N120,000
Prag inverter 3kva 24v ....N145,000
Prag inverter 5kva 48v...N250,000
Prag inverter 7.5kva 120v ....N410,000
Prag inverter 10kva 180v....N480,000

Prag 4kva 24v wall H ......N240,000
Prag 6.5kva 48v wall H....N350,000


PRAG servo & relay stabilizers ;

-Prag 3kva relay B(95-280v)..N
-Prag 3kva relay E(95-280v)..N
-Prag 10kva servo ..N110,000
-Prag 10kva servo(130-250v)..N115,000
-Prag 12kva servo...N
-Prag 15kva relay(95-280v)...N110,000 "Qty Promo"
-Prag 15kva servo(80-260v)..N220,000
-Prag 15kva servo(130-260v)..N190,000
-Prag 20kva servo(130-260v)...N230,000
-Prag 20kva relay cabinet(95-280v).. N150,000
-Prag 20kva servo(80-260v) ...N330,000
-Prag 30kva servo(80-260v)...N400,000
-Prag 30kva servo(1300-260v)..N380,000


UPDATED FELICITY PRODUCTS PRICELIST!

Felicity Solar panels;
160w mono...........30,000
250w mono...........43,000
300w mono...........54,000
160w poly ............27,000
250w poly ............39,000
300w poly ............50,000

Felicity battery;
200ah .................95,000

Felicity inverters ;
2.5kva 24v.............115,000
3.5kva 24v .............155,000
4kva 48v...................165,000
5kva 48v ...............220,000 ONGOING PROMO N155,000
7.5kva 48v..............340,000

Felicity hybrid inverters ;
800w 12v ............. 125,000
1600w 24v ........... 140,000
2400w 24v ........... 150,000
5kva with pwm .....200,000
5kva with mppt .....230,000

Felicity solar charge controllers 12-48v specs;
30a pwm..............20,000
40a pwm. ............25,000
50a pwm..............30,000
60a pwm..............35,000
40a mppt..............95,000
60a mppt .............120,000

KINDLY HURRY WHILE STOCK LASTS!


Protek 200L solar water heater... N215,000
With 30k , I can offer you a set of pro solar roof mounts to comfortably mount 4 units of 250 to 350w solar panel's including kits like ;
2 qty solar mount rail "4200mm" ,
4 qty rack end clamp,
6 qty mid clamp,
6 qty L feet with rubber & special screw....
Same goes to angle positioning solar kits;
- Adjustable front leg
- Adjustable rear leg
- Rail splice kit
- Grounding lug


WHATSAPP::: https:///2348170385620

*AUTHORISED DEALER PRAGMATIC TECHNOLOGIES*
All our prag products comes with reliable warranty
*AUTHORIZED DEALER INDIAN INVERTERS / BATTERIES ... Luminous PRODUCTS*
All our products come with 1 year Warranty
*AUTHORIZED DEALER SOLAR SHOP LTD PRODUCTS*
All our products come with 1 year Warranty.
For best affordable prices contact,
The number 1 credible online store,
Smartcell Global Services,Lagos Nigeria.
Simply call Sir Frankie "08135031951" for purchase,fast delivery and waybills .. Thanks !!

Frankie My friend and dealer.

I am pressed from the sidelines to read the ugly comments of readers on other rooms regarding your posts and pricelist, perhaps the frequency of your post may have culminated to that.

Your frequent pasting on every page here too is worrisome and derisory to your image and accrued goodwill which is bad for your business. Many may feel you are desperate and implicitl have their judgement in dealing with you.

I know you are quick to temper but just my honest view though.

earthrealm:
so finally got around to changing the plug on my repaired ''1 hp LG inverter ac''
seems its a 2hp compressor that was installed , though i wonder why or how, both compressors looked similar.
my people on gen mode it clocked btw 650 to 710w, after about 15mins operation, took it out from gen mode..it jumped to 1650w to 1710w!!!, and remained so for about 10mins...had to shut it down..would continue further testing later, i knew something was wrong after the repairs, but the superior cooling after the repairs made me complacent as it normallyranged btw 11% to 17% on my 5kva inverter on normal mode, unlike now it clocks in from 25% to 31%

somebody shud pls confirm the wattage of his 1hp Lg inverter ac on normal and gen modes, as i intend buying another unit, but i don dey fear now

Are you sure it was properly refilled, assuming the compressor are same spec? They need to pull vacuum on the system, put in the correct weight of the refrigerant. If these are not observed the compressor will work at a different watt

efuro:



Frankie My friend and dealer.

I am pressed from the sidelines to read the ugly comments of readers on other rooms regarding your posts and pricelist, perhaps the frequency of your post may have culminated to that.

Your frequent pasting on every page here too is worrisome and derisory to your image and accrued goodwill which is bad for your business. Many may feel you are desperate and implicitl have their judgement in dealing with you.

I know you are quick to temper but just my honest view though.

Hello Good morning, been a while although you do send personal messages via WhatsApp if you need to commune with me .. Simply overlook unnecessary biased assumptions as I see nothing spectacular or criminal minded castigations as you made it look , so try ignore as most men do ! An adjusted/edited post per page might be for a target audience and I don't see how some monitor such when not interested ! "He who wears the shoes knows where it itches" , those who post ain't equal to most who call n transact if seriously interested , simply ignore if not interested ! Don't be too quick to always judge one tho as we don't have same individual characteristics ... Thanks

thanks to oga DMERCIFUL for the 50amps blue fangpusun controller and DC breaker sold/supplied to me at a very affordable price. installed and working perfectly

kiekie1:


Hello Good morning, been a while although you do send personal messages via WhatsApp if you need to commune with me .. Simply overlook unnecessary biased assumptions as I see nothing spectacular or criminal minded castigations as you made it look , so try ignore as most men do ! An adjusted/edited post per page might be for a target audience and I don't see how some monitor such when not interested ! "He who wears the shoes knows where it itches" , those who post ain't equal to most who call n transact if seriously interested , simply ignore if not interested ! Don't be too quick to always judge one tho as we don't have same individual characteristics ... Thanks

Could I suggest a simpler and more elegant solution? since the item is too much even for interested parties to look at .

Put all items in an excel file with drop down to sort by category - The file may be easier for you to maintain and users to use( e.g. forward to friends, associated while recommending you as a supplier)

Either attach the file to post or store it on google drive/dropbox and only post with a link along with your contact deatils and promotional message

You can highlight only newly added itms or priceses dropped significantly ( say 20%) in the post to grab attention of users


wbr

Anil

Thanks for your patronage....Very much appreciated

Valto:
thanks to oga DMERCIFUL for the 50amps blue fangpusun controller and DC breaker sold/supplied to me at a very affordable price. installed and working perfectly

Urgent Pls !
Who has fairly used battery for sale. Location Owerri.
Earthrealm do you have any?

pheleix:
Urgent Pls !
Who has fairly used battery for sale. Location Owerri.
Earthrealm do you have any?

are you sure, you wanna buy from me?
i have about 6months old long batts,they fare well under loads below 1kw, but drop voltage with higher loading

pheleix:

Are you sure it was properly refilled, assuming the compressor are same spec? They need to pull vacuum on the system, put in the correct weight of the refrigerant. If these are not observed the compressor will work at a different watt

yeah, try telling that to a naija technician, he will tell you how he has been doing this work b4 he was even born and all such nonsense. i refill car acs so i understand the tech, the lg tech refilled by ear, didnt pull vaccum, nor used a scale, am tired of the ac now. wish i had excess funds..would hv uninstalled it and bought a new unit, it reads 720w on gen mode..and 1500w on jet mode, this is a 1hp LG inverter ac

the trouble in this country of half baked technicians,
i know haier thermoccol have ventured into inverter acs, anybody using their units?... apart from LG N haierthermoccol..wch other inverter ac make is out there..that is reliable?

pranil:


Could I suggest a simpler and more elegant solution? since the item is too much even for interested parties to look at .

Put all items in an excel file with drop down to sort by category - The file may be easier for you to maintain and users to use( e.g. forward to friends, associated while recommending you as a supplier)

Either attach the file to post or store it on google drive/dropbox and only post with a link along with your contact deatils and promotional message

You can highlight only newly added itms or priceses dropped significantly ( say 20%) in the post to grab attention of users


wbr

Anil

Ok Boss, I will definitely work on that ! Thanks Sir

ojeysky:


I don't want the 48v, my setup is 24v for now. It is supposed to replace the current 24v 1.5kva inverter that I currently use. The 3kva MK series is limited to 1500W irrespective of whether it's 24/48v



Cool am sticking with getting the GK series then, please I will be interested in how you finally did your setup:
The wire size and distance to CC, DC breaker specs, other accessories used and how they are connected



This is fine by me, I don't think I would need that extension. The up to 4kw in the 3kva of the GK is already more than sufficient for me.

Thanks

Now waiting patiently for my 3Kva GK Series to arrive

NiyiOmoIyunade:
Please who has a contact for local suppliers of AC relays and contactors (electro-mechanical coils please not SSRs) - I have a personal home improvement project in hand and I cannot afford to wait the 2 weeks to receive foreign imports from Amazon or AliExpress.

Any particular reason for avoiding SSRs? Just got a few for heating purposes.

ojeysky:


Now waiting patiently for my 3Kva GK Series to arrive

How much total?

The SSRs are a bit more failure prone and you will need to mount them on an heat sink and sometimes add a fan too - the heavier the load demands on the SSR, the hotter it runs in general. All these limits and you will still pay a premium for it.

The electro-mechanical relays do not need any external cooling and the versions I have used switch within 10ms (faster than your average inverter) the only big minus for me is that loud thud when the coil engages and switches the contacts ON/OFF - the noise always startles my Madam and makes her nearly jump out of her seat

Saipro:

Any particular reason for avoiding SSRs? Just got a few for heating purposes.

I recently installed a 1.5Kva Luminous Solar Hybrid Inverter with 2 220ah Luminous Flooded Inverlast batteries. The load on the inverter is roughly 10 5Watt LED bulbs, 2 70w fans and a 32 inch LED TV with GoTV decoder.

I want to add some solar panels and I have several questions:

1) What Solar panels do you recommend with PROVEN high production efficiencies? I read of Flames, Suntech, Canadian Solar, Yingli, etc. etc.

2) The Luminous Solar Hybrid has an in-built CC of 40a. Does anyone have experience with this inverter? Should I still buy a separate MPPT for the solar setup or use the inbuilt?

3) I read about the importance of equalizing batteries. How often should I do this for my batteries, what charger should I use and for how long?

Thanks.