dammiedot:


the right Mirror was broken when got it, i had to replace the right side mirror with a tokunbo one, same issue then i swapped it with a brand new one still the same. when i try to properly Aim the camera the it displays on the screen, but then press the switch on top of the lever to activate the lanewatch it wont do any thing and also when i turn the lever to the turn to the right no display on the screen.

kingreign:


You may decide to watch and try this.

https://www.youtube.com/watch?v=mh5n0ie9Bkw

dammiedot:


i have tried what is in the video, see i get to the screen to start the Aming for the lanewatch (picture attched) but when i hit the start buton at the tip of the lever nothing happens, it just there. that is my main concern. i also attached the firmware screen of my infotainment system

dammiedot:


the right Mirror was broken when got it, i had to replace the right side mirror with a tokunbo one, same issue then i swapped it with a brand new one still the same. when i try to properly Aim the camera the it displays on the screen, but then press the switch on top of the lever to activate the lanewatch it wont do any thing and also when i turn the lever to the turn to the right no display on the screen.

dammiedot:


yes pls, camera is mounted. The connection from the camera to the infotaninment system is good from several test. but the lanewatch would not come up when activated. i dont know if its a firmware issue

kingreign:


When the replacement mirror came in, hope it's harnesses matched and was plugged in properly?


Do you have an SRS light on?
Are all buttons on your steering wheel and stalk working?

GAZZUZZ:


Have u done a reset?

dammiedot:


there is no alarm light on the dash board, both th tokunbo and new side mirror all matched. just confused about the whole thing. But i have seen from google that my firmware is not up to date. Any idea where this can be done, may be that could fix it?

GAZZUZZ:


I cannot help without a vehicle model

bignero:




Appreciate the response boss.

Sorry for the error, it's actually a Toyota corolla

Attached are the images..

Summary of the issue again.

One side(particular Tyre is always getting flat)I've changed that Tyre like 3 times in one year

I removed it and the vulcanizer said one side of the Tyre was swollen.. So it's alignment issue.

Took it to another mechanic.. They didn't use machine but my eye checking they said the Tyre was balanced (I also thought the problematic Tyre was a bit outside).
They said it's not out side its the same as the other that it's balanced.

Went to another mech, they said its the beam.. I don't want to change beam, ie go and touch what isn't a problem and create another one.

Before I changed it the last time, when am turning, it would seem to be drawing the steering back..

Last time I changed the Tyre was when the vulcanizer noticed one side has swollen.. Am yet to get that pull back feel again.. But the Tyre problem indicator shows on the car (when I bought the car the seller said it was electric fault) evidently it's not.

Thanks in anticipation.

Wanted to load the image for some reason its too large

iyke4:
Good evening Gazzuz, please my 2011 Lexus gx460 when coming from the port had an accident, now the car reverse gear is not working, tho the car can be put in reverse gear, the drive gear is working, what do you think might be the issue.

dannybrasky:

This is sad,sorry!!

Naija turning clean title cars to salvage since 1876.
Are you sure this wasn't done by the port?

iyke4:

Bro, It was a useless truck Outside the port that hit the car, now gotta fix faults which wasn't there before, tho maybe the transmission might be tampered with inside the port, nothing can be left out.

iyke4:
Good evening Gazzuz, please my 2011 Lexus gx460 when coming from the port had an accident, now the car reverse gear is not working, tho the car can be put in reverse gear, the drive gear is working, what do you think might be the issue.

GAZZUZZ:


Have you ever read the fine print on Run and drive? The accident did not cause the problem. Vehicle came like that.

iyke4:


The reverse gear was working when the car was brought in, it stopped some days after the accident, so what's the solution?

thaqib:
Chief ,gazzuz, what's ur opinion on 07/08 Hyundai Elantra? Reliability, technician for repair and spare parts availability. Would u order it to 03 corrola. Price is close and needs to decide

Tzar:
Hello, my car is a 4cylinder 2008 Accord. I had a part of my engine welded by a ‘Kazeem‘ due to an annoying noise when I start the car. The noise went away, but I realized that’s the wrong procedure after stumbling on articles online. PLS HOW DO I CORRECT THIS BIKO.
Also, my engine started vibrating with increased load like AC ON. It’s not much , but noticeable.
Lastly, my Kazeem fixed my suspension bits & brakes. Saldlly, I have my ABS,! , VFS & brake lights all on. It ALL goes off for like 15mins when it rains.
Please help as I am not happy at all. I will be posting the pictures of the codes pulled

kingreign:

If it's not updated as is, you can get it updated via HDS (purchase the HDS tool), or visiting Honda Place for that

Macmilla:


Good day boss.
I have this 2006 Honda accord v6 (discussion continues). It has a couple of problems and I need help with it.

1. Car seems to loose power. It drives like a weak old 4cyl engine despite being a fairly new v6. Some times the throttle will need to be pressed all the way down before the gearbox kicks down. No, the gearbox doesn't slip, it changes smoothly. No check engine light. Air filter has been cleaned.

2. When started in the morning, it sounds like it had a leak in the exhaust, but sound normalises as the car warms up. You barely notice the bad sound when fully hot (not completely gone). Car had a bad exhaust gasket, which was fixed. All attempt to find another leak proved abortive. One of the three catalysts is missing in the pot, though pot remains intact (don't ask me how), but the remaining 2 are in very good shape. I don't think the missing catalytic converter is the cause cos catalytic converter is only responsible for emissions, but I might be wrong.

3. The car fails to crank sometimes when the ignition is turned. I have to return key to 0 and then try again. Sometimes it cranks on the 2nd or 3rd attempt. I was told it was the ignition switch on the steering column because it makes some tiny sparking sound if the key is turned slowly to start. I've replaced the ignition switch, sparking sound is gone, but sometimes it still doesn't start.

Any advice will be highly appreciated. Tnx

double3:

Transmission probably had some issues before it was shipped in.

dammiedot:


Thank you @Kingreign, i will look into this.

iyke4:
Good evening Gazzuz, please my 2011 Lexus gx460 when coming from the port had an accident, now the car reverse gear is not working, tho the car can be put in reverse gear, the drive gear is working, what do you think might be the issue.

GAZZUZZ:


I would take the corolla over it