160w and 260w felicity solar panel now available.
160w is #21,000

260w is #34,000.

Call/WhatsApp us on 08168986461

Getting it via USB hooked to a raspberry pi, implemented a fantastic github project
hxxps://github.com/ned-kelly/docker-voltronic-homeassistant
Runs into my HASSio install via MQTT with other automations via node-red.


There's another ESP32 based one i came accross somewhere, cant seem to remember the link sha

adrusa:


Nice. How did you get these data from your MPPSolar?

earthrealm:


Yeah to create a 280ah 48v bank.
However my actual target is 300ah to 400ah 48v bank

Bro, shebi you have two functional kidneys nau. Humans can survive on just one of the pair of functioning organs in the body. The eyes, lungs, the kidneys, suprarenals, testes, et cetera. Heck even one hemisphere of the brain can be excised while the other fires on - okay, that one is not advisable.

Just holla guys that pay for organ donation.

litaninja:
Getting it via USB hooked to a raspberry pi, implemented a fantastic github project
hxxps://github.com/ned-kelly/docker-voltronic-homeassistant
Runs into my HASSio install via MQTT with other automations via node-red.


There's another ESP32 based one i came accross somewhere, cant seem to remember the link sha

Thanks. I realized what you were using after I asked. I have tried in the past to get that working with no success. However, solpiplog is doing the same thing. My grouse with solpiplog is that I can not find an x86_64 binary of the latest release and I also like keeping things in the docker.

earthrealm:


Yeah to create a 280ah 48v bank.
However my actual target is 300ah to 400ah 48v bank

Lol so who is setting up a mini grid between both of us o

justcallmenuel:
160w and 260w felicity solar panel now available.
160w is #21,000

260w is #34,000.

Call/WhatsApp us on 08168986461

Can I add the 160w to an existing 150w setup?

tonididdy:

Can I add the 160w to an existing 150w setup?

Yes boss!

Brand new 200Ah 12v Monbat battery available, #155,000. Call/WhatsApp us on 08168986461

75A 120v CineMax MPPT charge controller available, #140,000. Call/WhatsApp us on 08168986461

80w All in one solar street light available, #95,000. Call/WhatsApp us on 08168986461

Goodmorning house, trust we are all in great spirits this weekend. Just came across this eflyer and it looked too worrying to be ignored. can a 0.85kva "solar solution with 4 panels" really handle all these for 24hrs? What do you feel is ideal for the loads mentioned if its a no..no for you.Pls share your thoughts on this

For reliable power solutions
Contact,
Smartcell global services
CALL:: 081-350-31951
WHATSAPP::: https:///2348170385620

kiekie1:
First come-First serve!

All brand new but rarely used items:

Unilite 12v 200a battery (1 unit).... 70k
Unilite 225w 72 cells mono panel (2 units) ... 55k
60a pwm LCD solar controller ..... 29k
Mercury 2.4kva 24v inverter "Neatly used" ... 39k
Luminous battery rack trolley .... 15k

Contact,
Smartcell global services
CALL:: 081-350-31951
WHATSAPP::: https:///2348170385620

Battery SOLD!
Feel free to contact us as usual.. Cheer's

Please expert in the house,is there really any difference in the efficiency of PWM CC compared to MPPT?I have attached 2 pictures of the current generated by both at about 10:30 am today.There isn't really any significant difference.The MPPT is connected to 260w x4 units of Felicity panels and is charging 2units of 200ah batteries in series while the PWM is connected to 160w x 4 units of Felicity panels charging 3 units of 105ah batteries in parallel.I really do not see much difference except there is something I am not analysing right.

ceaser:


Bro, shebi you have two functional kidneys nau. Humans can survive on just one of the pair of functioning organs in the body. The eyes, lungs, the kidneys, suprarenals, testes, et cetera. Heck even one hemisphere of the brain can be excised while the other fires on - okay, that one is not advisable.

Just holla guys that pay for organ donation.

Bad wuked man

I recall a thread where you were talking about a 3 stage 12v charger with pulse/restoration setting. On another thread, searched cudnt locate it again, can you help me?.
Also the infinitum desulphator, who knows where i can get it and how much?

omotoda:
Please expert in the house,is there really any difference in the efficiency of PWM CC compared to MPPT?I have attached 2 pictures of the current generated by both at about 10:30 am today.There isn't really any significant difference.The MPPT is connected to 260w x4 units of Felicity panels and is charging 2units of 200ah batteries in series while the PWM is connected to 160w x 4 units of Felicity panels charging 3 units of 105ah batteries in parallel.I really do not see much difference except there is something I am not analysing right.

Normally with the number of panels connected to the MPPT you should see more hervest than the ones connected to pwm so unless the orientations are not the same I don't see why a 1kw+ should hervest same with a 700w+

omotoda:
Please expert in the house,is there really any difference in the efficiency of PWM CC compared to MPPT?I have attached 2 pictures of the current generated by both at about 10:30 am today.There isn't really any significant difference.The MPPT is connected to 260w x4 units of Felicity panels and is charging 2units of 200ah batteries in series while the PWM is connected to 160w x 4 units of Felicity panels charging 3 units of 105ah batteries in parallel.I really do not see much difference except there is something I am not analysing right.

You connected the panels wrongly to the powmr cc, i see 27.6v i assume this is incoming panel voltage.
To enjpy mppt connect the panels in series .4s1p or 2s2p.
Secondly state of charge of the batteries plays a huge role in what the cc can send to them.
To be doubly sure, hook up a 300w load to both setups and observe

kiekie1:
Goodmorning house, trust we are all in great spirits this weekend. Just came across this eflyer and it looked too worrying to be ignored. can a 0.85kva "solar solution with 4 panels" really handle all these for 24hrs? What do you feel is ideal for the loads mentioned if its a no..no for you.Pls share your thoughts on this

For reliable power solutions
Contact,
Smartcell global services
CALL:: 081-350-31951
WHATSAPP::: https:///2348170385620

The advert is one of the clowns we are talking about.
E no possible naah, na fake advertising.
If engaged, he will now say that the loads will not run concurrently .
.with staggered loading, sure u can hv 247 light

earthrealm:


You connected the panels wrongly to the powmr cc, i see 27.6v i assume this is incoming panel voltage.
To enjpy mppt connect the panels in series .4s1p or 2s2p.
Secondly state of charge of the batteries plays a huge role in what the cc can send to them.
To be doubly sure, hook up a 300w load to both setups and observe

Batteries are in 2s2p.The voltage you see as 27.6v is the battery voltage not panel voltage

Below is panel voltage.

earthrealm:


The advert is one of the clowns we are talking about.
E no possible naah, na fake advertising.
If engaged, he will now say that the loads will not run concurrently .
.with staggered loading, sure u can hv 247 light

Exactly my thought Baba ! One love

Flames Solar Panels Available For Order!

150w mono ... 24,000
270w mono ....36,000
320w mono ..... 45,000
360w mono "half cut cells".... 47,000
360w mono ....... 49,000

Contact,
Smartcell global services
CALL:: 081-350-31951
WHATSAPP::: https:///2348170385620

omotoda:


Batteries are in 2s2p.The voltage you see as 27.6v is the battery voltage not panel voltage

Below is panel voltage.

Ok, likely state of charge issue then or diff panel orientation.
Put 300w load on both setups and watch to rule out this variable.

Mppt trumps pwm above 600w array, thats part of the reason an mppt costs 4x as pwm. The manufacturers are not madt

earthrealm:


Ok, likely state of charge issue then or diff panel orientation.
Put 300w load on both setups and watch to rule out this variable.

Mppt trumps pwm above 600w array, thats part of the reason an mppt costs 4x as pwm. The manufacturers are not madt

Maybe orientation.One set is on the west while one is on the east.Although my roof is almost flat so I really do not see that affecting it.

ojeysky:


Normally with the number of panels connected to the MPPT you should see more hervest than the ones connected to pwm so unless the orientations are not the same I don't see why a 1kw+ should hervest same with a 700w+

They ain't located on same side.One is west while one is east but roof structure is virtually flat

Responded to PM

adrusa:


Thanks. I realized what you were using after I asked. I have tried in the past to get that working with no success. However, solpiplog is doing the same thing. My grouse with solpiplog is that I can not find an x86_64 binary of the latest release and I also like keeping things in the docker.

omotoda:


Maybe orientation.One set is on the west while one is on the east.Although my roof is almost flat so I really do not see that affecting it.

Check again btw noon and 1pm, when the sun is directly overhead

omotoda:


Maybe orientation.One set is on the west while one is on the east.Although my roof is almost flat so I really do not see that affecting it.

Are both batteries on same state of discharge? A battery almost full will take lesser charge current. This test can only be fair if both batteries are same capacity and also at same state of discharge with PVs positioned in same location and angle.

omotoda:


They ain't located on same side.One is west while one is east but roof structure is virtually flat

So this is not the way to determine if the MPPT is doing better. However I hope you can see that you need to review the orientation of the panels connected to the MPPT

Hello house

I have 2 units outback flexmax 80amps
Outback hub
3 units 300w Canadian solar panel

These items are for sale due to upgrade

Call - 08117398294

Chat - http:///2348117398294

zeestone99:
Hello house

I have 2 units outback flexmax 80amps
Outback hub
3 units 300w Canadian solar panel

These items are for sale due to upgrade

Call - 08117398294

Chat - http:///2348117398294

One outback remaining

Order now

Call/chat 08117398294

Greetings all,
I needed a solar inverter..., so after discussing with the seller, he recommends that 2.5kva would be best for the workload.

I'm a complete novice, so I want to be sure that I'm getting the best.

The seller gave me the system specs as follows; 2.5 kva, 2 batteries (200Ah), and 2 solar panels.
I was thinking that the solar panels should be more than 2. Is that correct?

Also, please what relevant questions should I ask the seller before making payment to be sure that I'm getting the best?

Thanks in anticipation for your help.
God bless!

SoftHeart:
Greetings all,
I needed a solar inverter..., so after discussing with the seller, he recommends that 2.5kva would be best for the workload.

I'm a complete novice, so I want to be sure that I'm getting the best.

The seller gave me the system specs as follows; 2.5 kva, 2 batteries (200Ah), and 2 solar panels.
I was thinking that the solar panels should be more than 2. Is that correct?

Also, please what relevant questions should I ask the seller before making payment to be sure that I'm getting the best?

Thanks in anticipation for your help.
God bless!

It all depends on your load and what's the capacity of the panels?

ojeysky:


It all depends on your load and what's the capacity of the panels?

Oga , you have been very loyal to this thread and very willing to help (online and offline). No question is too small or irrelevant. I just hope you have been receiving credit alerts commiserate with the efforts. All in all, God bless u.