According to the confirmed news by Eleaf team that their latest device : Eleaf iStick Basic will be launched on 12-12-2015.Maybe as you have known,the iStick Basic is a full kit,with a 2ml liquid holds GS Air 2 Atomizer ,build in 2300mAh battery,with a delicated and fashionable appearance and works well with 510 and ego threading.

It was said the official team will release three colours for iStick Basic Starter Kit : black, silver, grey, red, hot pink, blue and following is the first image of Eleaf iStick Basic Kit shared by official team



See iStick Basic With GS Air 2 Atomizer official features

exquisite and fashionable appearance
With GS Air 2 Atomizer
Build in 2300mAh battery
510 and ego threading compatibility
2ml liquid holds
Direct output voltage system is applied in the iStick basic. The higher the battery level, the higher the output voltage.
The e-liquid level can easily be noticed by a simple glance at the window.
The air inflow can be adjusted with ease by rotating the flexible airflow control ring in the GS Air 2 atomizer.
A new GS Air atomizer head 0.75ohm (8~25w) with pure cotton wick is applied in the iStick basic.

Eleaf iStick Basic Full Kit Package Content

1 x iStick Basic
1 x GS Air 2 atomizer (GS Air pure cotton head pre-installed)
1 x extra GS Air head 0.75ohm
1 x 510 connector
1 x Go connector
1 x USB cable

For the time being,there are more and more temp control box mod with 200w power output supported,see following list

SnowWolf 200w Mod
IPV3 Li V2 165w (users can update to 200w via firmware updating )
Smok Koopor Plus 200W TC Mod

Incoming 200w Mod

VaporShark 200w
IPV5 200W TC Mod

And here i will take titeled IPV5,VaporShark 200w and SnowWolf 200w TC Mod for example,hope it will be useful.

SnowWolf 200w TC Mod : This mod has out the market for ages, in some degree,currently,snowwolf 200w is the only one mod that can directly suppor max power to 200w and most important,this mod with so many users with a good reputation and the price for snowwolf 200w was hard to beat as well,see here : Best US Store to buy SnowWolf 200w TC Mod ,see the official features

magnetic battery door
200w power output
Adjustable temperature control
Low voltage protection
Low resistance protection
High input voltage warning
Output short circuit protection
Reverse battery protection
Overheating prevention
510 thread compatibility
OLED Screen diplay
Supports both standard and nickel wires

IPV5 200W is a incoming box mod by Pioneer4You ,which features 200w max power supported and with TC temp control function and was powered by 2 x 18650 batteries.Just like former IPV Series box mods,the IPV5 also used Yihi SX340 chip.See features

Supports max power to 200w
Use Yihi SX340 chip
With TC Temperature control
Powered by 2 x 18650 batteries
works well with 510 thread
Two-tone paint

VaporShark 200W Mod : This mod was very hot and popular,though it wasnt avaiable,yet, the attention about vaporshark 200w was very high,if you checked fourms ,you will find there are so many topics about it.Yet,till now,the official team didnt tell us the detailed release time,so let's just stay tuned for more updated news patiently.

What is TFV4 Mini ?

The TFV4 Mini is the latest device by Smoktech,it is the mini version of TFV4,features 3.5ml liquid capacity,compatibility with eight brand new cores: TF-CLP2, TF-S6, TF-RCA, TF-Ti, TF-N2, TF-N2 Air Core, TF-T2, and TF-T2 Air Core to match a wide range of mods and so on. What's more, TFV4 Mini has two versions : TFV4 Mini Single Kit and TFV4 Mini Full Kit. And this article we talked about was Smok TFV4 Mini Full Kit.This full kit contains almost all things you need for a powerful tank and if you are in the market for it,right here is for you : Smok TFV4 Mini Kit ,full in stock ,hard to beat price and free shipping.

See the TFV4 Mini Kit Package Content Below

1 x TFV4 Mini Tank (Silver)
1x TF-CLP2 Core (0.35Ω)
1x TF-S6 Core (0.4Ω)
1x TF-RCA Core
1x Replacement Glass Tube
1x Black Seal Gasket A
1x Black Seal Gasket B
2x Replacement Seal Gaskets for Top Cap
1x Small Airflow Tip
1x Black Vape Band
1x White Vape Band
2x Replacement O-rings for Drip Tip
1x Refill Warning Card
1x Screwdriver
1x Package of Organic Cotton
1x Replacement Seal Ring for Glass Tube
1x Replacement Wire

Official features

compatibility almost all mods in the market,specially for X Cube Mini 75w TC .
3.5ml liquid capacity.
510 thread compatibility
100% organic cotton.
eight brand new cores: TF-CLP2, TF-S6, TF-RCA, TF-Ti, TF-N2, TF-N2 Air Core, TF-T2, and TF-T2 Air Core (TF-N2 Coil & TF-Ti Coil are using Nickel 200 and Titanium temperature sensing wire respectively).
All coil heads use the Separate Chamber Design, which can significantly improve the stability and reduce the interference with each other coil.
The drip tip with double-layered structure has been improved on the inner layer of glass to avoid scalding.

Comparison between Smok TFV4 Tank

Commons

1. came from same team.
2. with two versions : single kit and full kit.
3.works well with 510 thread.
4.100% pure organic cotton

Different

1.Liquid capacity : TFV4 with 5ml liquid holds,while the TFV4 Mini was 3.5ml.
2.Compatibility Coils : Smok TFV4 With four different coil heads: quadruple, triple, single RBA and dual RBA ,while tfv4 mini kit with eight brand new cores: TF-CLP2, TF-S6, TF-RCA, TF-Ti, TF-N2, TF-N2 Air Core, TF-T2, and TF-T2 Air Core .
3. TFV4 Supports RBA function,while TFV4 Mini didnt.
4.Smok TFV4 Mini Tank has improved the double-layered drip tip to the inner layer of glass .
5.In size : the TFV4 Mini was a little smaller than TFV4.
6.TFV4 Mini Full Kit package contents more than TFV4 Full Kit.

TFV4 Mini Kit User Guide : How to build RBA

1、Pls make sure your hands are clean before starting

2、Taking TF-RCA core apart

TF-RCA comes with two build screws on each side, one side is the plus terminal of the deck and the other is minus terminal. This provides more possibility for you to install your coil exactly and comfortably.

3、The kit includes a small airflow tip that can be placed onto the central airhole of the Rebuildable Clapton Atomizer deck. It is designed for throat hit vape by reducing the airflow.

4、Installing the pre-wrapped coil. Place the coil (it can be Clapton coil or others) between the screws and wrap the ends around them and tighten up. Attention: The coil has to be wrapped with one end at the plus terminal, with the other end at the minus terminal.

5、Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base. Then cut the exceeding ends of wire off.

6、Cutting a strip of cotton and make sure it’s not too much and not too less.

7、Inserting the cotton, and placing it in the middle.

8、Cutting the cotton at an angle and make sure it’s not too short and not too long.

9、Wet the coil with your e-liquid and adjust the cotton.

Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.