@All the new upgrade for srt4699XII has PIP(Picture In Picture)
http://wizkid.persiangig.com/Strong%20Patch%20Software/SRT4669XII_7111_ALL_ME_109p_20110414.zip/download

pls i want to knw hw 2 restore factory settings on my srt 4669xii. Thank you.

Timothy:

pls i want to knw hw 2 restore factory settings on my srt 4669xii. Thank you.

@ Timothy i dont know why you want to do dat, but to restore factory settings, GO TO MENU AND SELECT SYSTEM SETTINGS, ENTER PIN (0000), GO TO DATABASE RESET, ENTER PIN (0000), SELECT FACTORY RESET, and wait you are done. thank you

Pls anybody in PH should direct me to a good technician cos i hv some 53x boxes i wish to repair.

hello all.i just came bac after two days to find out i cant put on my strong69xii, i heard den after there was serious lightnin around d period i left.i opened d decoder nd its in good order, notin burnt at all, am confused, wht do i do, i stay in onitsha, i just used it for jst a month

@ALL, if i ON my st4669x it w display 8888 atimes 6666 atimes ---- atime 0000, i try 2 used remote control to set it but no working, it did not display anytin on d Tvset pls asist me i don't understand the problem

TOWNJUJU:

Pls anybody in PH should direct me to a good technician cos i hv some 53x boxes i wish to repair.

GO MILE3 FROM IKOKWU JUCTION ENTER A BUS TO ELABUCHI, REPAIRERS ARE LINED UP THERE.

Femwal:

@ALL, if i ON my st4669x it w display 8888 atimes 6666 atimes ---- atime 0000, i try 2 used remote control to set it but no working, it did not display anytin on d Tvset pls asist me i don't understand the problem

@ femmwal
you probably upgraded your Box recently and as such will experience this type of problems if the box happens not to be an original one.
your best bet is to take it to any fellow N/lander so that a 'box to box' transfer is done for you.
good luck

sugafoot:

GO MILE3 FROM IKOKWU JUCTION ENTER A BUS TO ELABUCHI, REPAIRERS ARE LINED UP THERE.

i have taken them there already. Tanks anyway, i appreciate.

sugafoot:

GO MILE3 FROM IKOKWU JUCTION ENTER A BUS TO ELABUCHI, REPAIRERS ARE LINED UP THERE.

i have taken them there already. Tanks anyway, i appreciate.

@all, if srt4669xii reveice 2 show video but giv sound, what is d solution

@femwal
check your connection its probable that your video connection cable is improperly fixed.
Another cause may be that the cord itself is bad.
if non of the above then the circuitry inside the box is faulty.take it for a check.

guys pls wat is d current price for brand new strong srt4669x decoder? i wil like 2 know cuz i want 2 buy it next week n change 4rm mytv 2 multitv, thanx yall

4669x is no more in the market. U can only get 4669x11 and that is even better than 4669x. The price is 12-12,500k

versace400:

4669x is no more in the market. U can only get 4669x11 and that is even better than 4669x. The price is 12-12,500k

thanks bro,

@all is there any patch i can use to upgrade my 4669X11 to view avi file using usb port @all is there any patch i can use to upgrade my 4669X11 to view avi file using usb port

@all, can anyone help me, my strong srt4651x is displaying lnbf when you on it and becos of this every signal is ceased. Even when i even disconnect the cable cos i thought wires might be touching but the error is still there. What do i do?

Original Strong HD satellite receivers at good good prices:
SRT 4910- #35,700
SRT 4900 -#31,800
SRT 4930 -#23,200
SRT 4669z-#19500

Prices are still negotiable.
Beware of fake products, buy original.
Orbital Concept: +2348054589716, orbitalconcept@yahoo.com

I thought srt 4930 is the latest, how come it is cheaper than the older srt4900, srt4910?

What is the effect of decoder to decoder transfer of firmware if the transfer is interrupted in anyway.

nearest:

What is the effect of decoder to decoder transfer of firmware if the transfer is interrupted in anyway.

If it just interruption and power is on no problem but if it as a result of power outage then it is kaput(DEAD)

Lov4sat:

If it just interruption and power is on no problem but if it as a result of power outage then it is kaput(DEAD)

Is there a particular operating system that can be used to reload firmware? I've tried using windows vista and on every occasion i get this message 'NO COM PORT AVAILABLE', is there anyway around this?

@all, can anyone help me with the solution to my strong decoder srt4651x, when you power it, it just shows lnbf and the signals so off. sometimes ago, when it does that, i will just off and on again and it will work but afta sometime it will show lnbf but recently if you on it it just shows lnbf and because of that i can even use the decoder. i thought it was wire that was touching, but even after disconnecting the wires from the decoder, it still shows that lnbf, [b]PLS I WANT YOU GUYS TO HELP ME OUT

nearest:

Is there a particular operating system that can be used to reload firmware? I've tried using windows vista and on every occasion i get this message 'NO COM PORT AVAILABLE', is there anyway around this?

@Tonnero23

Your question has been answered at the appropriate thread where you posted it and stop posting same thing all over the place as this will not solve your problems on time

@tonnero23
for ur lnbf problem, you can take the receiver to a technician,your tuner may need replacing.

Is there a particular operating system that can be used to reload firmware? I've tried using windows vista and on every occasion i get this message 'NO COM PORT AVAILABLE', is there anyway around this?

When you go to device manager, are the ports installed and enabled?

I am in Ghana and wish to buy a strong decoder. I need advice on the model I should buy and any device or software i need to watch free dstv channels.

Pls house, how do i watch what I have recorded from my strong decoder 4669z(.trp files) on my computer.

Pidzo:

When you go to device manager, are the ports installed and enabled?

Yes,

Hi guys,
someone should help me with pictures on how satellite decoders can be connected to pc or laptop with the help of RS-232 CABLE, seperate pictures of the RS-232, including with end to end of the RS-232 CABLE.
Thkq