I was driving one day and this light popped up went online and checked it showed that my tail light( break light ) was bad but it wasn't. Minus the one on my windshield at the back. Had to change all the break bulbs as only the windshield bulb didn't stop the light from disappearing from my dashboard . How can I manually remove this light since my break lights are ok .I don't like unnecessary lights on my dashboard please

The light

That should be break light

Trustme2:
That should be break light

it says it indicates a tail light ( brake) has blown. But everything is fine. I just want to remove the indicator

Bash26:
it says it indicates a tail light ( brake) has blown. But everything is fine. I just want to remove the indicator

brake light is not the only tail light check all rear light (Reverse, brake, fog rear light) all the rear bulbs in general

Japanese shitboxes and their insurmountable issues

Smartchoiice:
Japanese shitboxes and their insurmountable issues

Instead of providing solutions to the op, you came here to forment trouble. You don't act what you preach.

Evidence captured for future use.

To be clear, does the light come on when you press the brake pedal or when you turn on the headlights?

nurey:


Instead of providing solutions to the op, you came here to forment trouble. You don't act what you preach.

Evidence captured for future use.

You Japanese shitbox owners will do well to grow your dead threads

cyborg123:
To be clear, does the light come on when you press the brake pedal or when you turn on the headlights?

it comes on when I press the brake pedal sir

Bash26:
it comes on when I press the brake pedal sir

Ok
1. Hope you didn't replace the bulbs with LED bulbs?
2. Are you sure you replaced the bulbs you changed with the right wattage?
That instrument cluster warning is essential. Don't remove it. It's part of what makes your car different from 1984 benz 200.

cyborg123:

Ok
1. Hope you didn't replace the bulbs with LED bulbs?
2. Are you sure you replaced the bulbs you changed with the right wattage?
That instrument cluster warning is essential. Don't remove it. It's part of what makes your car different from 1984 benz 200.

it happens that once I on the engine it doesn't come up but once I engage the brake to put gear the light comes up and stays till when ever I off the engine. It wasn't like this before. Now the brake light I changed was good. Just that one filament cut I changed it. Then the one on the back windshield am sure I didn't notice whether it was actually working before so I brought it out and found out it was bad so I changed it and still the indicator won't go away

What about your clear the Error first with an OBD II scanner ? See if it comes up again

Online search indicates a Light Failure Sensor module damage or wiring problem could cause your problem if other things pointed out checks out.

The only way to disable the light is to remove its bulb behind the panel or block it but I recommend you just ignore the light.

I think you changed the bulbs with a wrong wattage. Check again, and do the needful.

Smartchoiice:

You Japanese shitbox owners will do well to grow your dead threads

You're just perpetually empty.


Mark my word.

Perpetually!

MedicH:


You're just perpetually empty.


Mark my word.

Perpetually!

Painment.....