I did 180 days @17% with Fcmb. Though, I'm yet to be debited but i can see a hold with pending transaction of the bid amount in my account. In my opinion, it's better to bid by yourself if your bank allows it as you can monitor and tell if your bid was successful or not. Going with the bank rate will leave you at the mercy of the bank as you cannot tell if they are being truthful when they tell you their bid was unsuccessful

mechco:
have you try to check eletrical collection l mesn circuit if you have shout circuit you ill have that problem or ECM

How do I check to know if I have a short?

mayor2013:

If you are sure your fuel pump is ok. Leave that. Change your ckp and camshaft position sensors (bank 1 and bank 2) , pathfinders are known with this problem. Was has worked for me while on the field is changing the ckp and cmp. Hope this helps. Am sure your swirl control valve was connected wrongly, that solenoid hardly spoils but inorder to be sure test with a battery and listen to the clicking sound. What is the mileage on your car?

Ok, maybe I'll try and change out all the sensors at once. Which is better between toks and new sensors. The mileage is around 70,000

Costee:

How good was the CPS you installed: Toks or new?

.

The CPS was toks. It was removed from an engine and we had to try a couple of it before finally settling for one that worked. Initially, the plan was to change all 3 sensors (2 crankshaft and 1 camshaft) but ended up changing just one cos after testing about 3 different camshaft sensors on the car, it appeared the one that came with the car was better. Keeping every other thing the same, the new camshaft either made the car stall before starting or not make it start at all. But on putting the one that came with the car, i could start the car without hesitation so I assumed the original camshaft sensor was good. For the crankshaft sensors, I changed one and tested the car ok for like 2 days. The issue came back again on the third day. I tried swapping the two crankshaft sensors but I still get the same error code (bank A sensor malfunction). Is a new sensor better?

I have a 2003 Nissan Pathfinder and it's difficult to keep the car running for more than 20mins. Each time I start the car, it seems to idle well and also moves well but the ignition goes off barely 15 -20mins later. I have a portable scanner that indicated the crankshaft position sensor A circuit malfunctioned (P0335) and Swirl control solenoid valve (P1130). I tried changing the CPS sensor and the truck drove ok for like 2 days after which it went back to the same problem of running for just few mins before going off. The code is also back. Each time the ignition goes off, the truck will refuse to start up again except I wait for minutes for it to cool down. I've asked someone check the fuel pump and I was told the pump is very ok as it is also returning well. What could be the problem?

Pls send cost and breakdown of the 4 bedroom bungalow to palmos_2005@yahoo.com

shadetwins:
which hospital are you using in newark

Just transited via NJ. Final destination was Houston

Tiababy:

Thanks Darius 84
But did u declare during application u were going for child birth? I am getting excited. Lol

Yes we told the VO we were going for childbirth and vacation. Wife was visibly pregnant when we went for the interview.

Tiababy:
Pls, does anyone know anything about New Jersey POE. Any experience, pls share.

Newark New Jersey was awesome. Came in with wifey and spent less than 3mins with the cbp officer. Asked why we were in the US, told him vacation and childbirth. That was it. I was surprised. Took wife's pic and stamped us in. Went through Agriculture and also had to fill a form cos we declared having food and funds in excess of 10k. No biggie, no food siezed, money was not checked either. Just filled the fund declaration form and that was it

The company is recruiting for the following offices:

1) Business Development Officer: B.sc/HND/MBA/Msc in any social and business discipline, with minimum of 2years work experience in related field, highly driven to achieve goals and results, fluent in english and hausa. Matured, intelligent and can work with minimal supervision. Ability to generate and execute business transactions.

2) Marketing Officer: B.Sc/HND/MBA/Msc in any social and business discipline, 2years minimum work experience in related field, strong drive for achievement of goals, strong selling skills, intelligent, hardworking, mature, able to work with minimal supervision. Must speak english and hausa fluently.

Interested candidates should forward CV/RESUME to crownnaturesnigltd@yahoo.com. Interview date is Monday 1st July, 2013, shortlisted candidate will be contacted.

Please how much does it cost to clear the following cars: Infiniti fx35, Toyota 4runner, Nissan pathfinder, Nissan murano. All cars are 2003-2004 model. Thanks

KINDLY HELP ME CHECK VIN: 1HGCM56894A063627 AND MAIL REPORT TO palmos_2005@yahoo.com

Send more pictures and VIN to palmos_2005@yahoo.com

Send details of investment to palmos_2005@yahoo.com

Forward pixs to palmos_2005@yahoo.com

Pls can I get the report for this VIN: 4T1BE46K18U754311