Makaveli217:


You're welcome
I hope it's good. You can follow the steps I mentioned before, charge and test run it, if you have more, do the same for all, I wish you luck.

okikigsm:


Google that battery inscription to know d more abt it especially d capacity

Penuelseun:
Pls never charge li-ion cells over 4.2v for any reason unless the manufacturer states it in the battery specs, better you charge below that voltage to extend the life of the cells. Lithium ion is not forgiven of over-voltage

Makaveli217:


You're very much welcome.

1. OK, you'll get 4.2v - 4.4v when fully charged.
Do ensure to charge it full and leave it for sometime before you begin the test, I recommend overnight or a whole day, I call it the cool down period or break in period, reason because immediately after charging, there's a voltage rise, eg, a battery rated 4.2v when fully charged will read 4.4v, so that's to ensure any over flow voltage to properly settle.

2. That's not an issue, I can put you through in some part you don't understand.

3. Cool, desolder the blue led that's connected with the fan, I removed mine.

Makaveli217:


1. Ok

2. What type of battery is it, a pic would be better. Charging a battery using power bank circuit board should give you 4.2v - 4.5v depending on the battery type.
If you want to try alternate charging method as seen in some portable speakers where they make use of SMD diodes like (M1, M5, M7 or S1, S5, S7) Etc, you can use any diode like (In4007, 4005, 4008, 4004, 4009) and a resistor in series (1.0ohms - 2ohms) with the diode.
Eg 5v charger (+) > Diode > Resistor > Battery.

3. This is what I use 5v Notebook Cooler 120mm in size. Picture included.
I haven't tried DVD DC motors, so I have no idea how much voltage they draw.

Makaveli217:


You'll need a digital multi meter and a timer (clock) or your phone time.

First connect the battery to the meter, if the battery is fully charged, you'll get 4.25v or 4.45v pending on the battery type, now connect the fan to the battery while the meter is still connected, once connected, time it, I time mine 1mins, sometimes 2minis. (This is where the clock comes in). If it's a good battery, it should read 4.24v or 4.28v, now that's the voltage drop. (Eg Below). That's how to know a good battery, if it drops below that, it's bad, even if it drops to 4.00v, connecting it together with other cells in series or parallel is risky.

Let's take for example, if the battery reads 4.25v while connected to the meter, then reads 4.20v when you connect the fan (voltage drop), that is 4.25 - 4.20 = 0.05. After your 1mins has enlaps, disconnect only the fan, now the battery voltage will rise back to the default voltage it was which is 4.25v, some will rise to 4.24v then slowly reach 4.25v. Now that's a good battery. Any battery that doesn't rise back to it's default voltage is close to going bad.

If after your calculations and yours drops below 0.05, don't mix it with others that is above 0.05.

officialfestus:
bro go youtube oh, like this my pack never still they alright.

officialfestus:
The advantage of using pvc pipe as a battery bracket, is that you can change any cell without dismantling the whole pack.

Makaveli217:
Nice innovation with the pvc.
You'll need to test each cell individually with a load to know if it's working properly, I suggest
you use a 5v tablet cooler fan for test, just to be sure all cells are good, so some wouldn't be draining others which is not safe.

James39:

If e get stats give am now.

Which kind reply you need again?

OCEANS7:
1.) In the search column on Twitter - type any of these - "Domains" "Domain names" "Domain Names" ...(follow other domainers worldwide).

1b.) Follow "SquadHelp" on Twitter - then, follow just about anyone that drops comments to their posts - with time, you'd be following a ton of domaining gurus!

2.) You can also familiarize yourself with:
Namepros(.)com

3.) Keywords are an easy way to locate people with similar interests on social media platforms - so, by using domaining related keywords - you'd find peeps.

MrPADDY:


Use Grey GBP bank account details. See previous discussion on page 3131
https://www.nairaland.com/3430037/what-make-money-online/3130

BriteWay:


Go to your Grey dashboard and copy your billing address and other necessary details.

kennypoka2:


Any update on this? Has he paid?

My advice would have been for you to have patience. The guy sounds like an unserious buyer (Interested but has doubts). Sometimes, sending them a Godaddy link doesn't do anything. You can request his number and call him. This way, you might still get to use the import lead option for his payment process.
I will really love to know how you handle this and if it was a success!

Sapiosexuality:
Simply send him a direct link. Some of them are like that. Just copy the URL link and send to him. Later you explain to Dan that it was from an imported lead. Or if the email he used to purchase it is the same one you imported Dan's commission will be 50 percent. Just send him link.

CornOak:


What You Should Have Done

When he requested that you send the payment link, you should have adjusted the price on your landing page and send him the BUY NOW link to your domain.

Commission Clarification

Whether he pays through the link sent to him by Dan or he clicks on your BIN, you will still pay the 5% commission since you've imported his lead and he has accepted.

The Solution

1. Adjust your BIN to $300 and send him the secure checkout link on Dan (the domain landing page).

2. Alternatively, send him the GoDaddy BIN link to proceed with payment.

At this point, the 15% commission should be the least of your worries. Just focus on receiving his payment.

By the way, since he has accepted/confirmed the transaction, DAN support will keep sending him payment reminders.

Good luck.

honestmike:


he might be busy with work. message or call him on a sunday afternoon or evening

therealMcCain:


1. Why is 15% too much for you?
Thats the price you have to pay in this business because your options are limited

2. I hope you will be able to salvage this sale because sometimes with these back and forth, the buyer might loose interest or think its a scam.

Please dont attempt Daaz. you have already gotten advice to use Godaddy(I recommend this option too)

Is the name listed on Afternic ?

is the name listed on Dan with Afternic distribution set to ON?


FOR NEWBIES, Americans dont know DAN or DAAZ, all they know is GoDaddy. So always let your outbound reflect Godaddy and Dan.






15% isn't too much if he had gone ahead to buy it without my involvement.

I'm still optimistic sha, the notion of scam is what I'm trying to avoid at all cost with with the end user.
Afternic distribution is on.

Thanks for sharing your wealth of knowledge and advice.

YoobaNesan:
@Flotwz, ask Dan CS to send you the payment link @5% lead import (yes they can), then you send it to him.

Oshiofe:
try this bro.


I noticed you might be having issue buying this domain
www.nairaland.com here

Let me know your thoughts on this.
Visit www.GoDaddy.com website, search for the domain name " nairaland.com " and buy from their trusted service

Regards

therealMcCain:


How then you you monitor your open rate/read rate

That you manually got an email from a website does not mean it will get delivered or be read.

Once I send a mail & do 2 followup without being read, I don't do followup to that mail again.

Might go back to the website to see if there is someeone else I can contact.

BOOKWORMLUX:

Na wa o

Manual means sending one at a time

I no understand you.

Are you looking for shortcut or what?

BOOKWORMLUX:

No trick for sending

I limited each email address to about 300 mails

I didn't bother to track because it'll waste my time, since I'm sending manually