It's possible to do
Kindly share the building plan

Luxury 3 bedroom bungalow.
We are located in Delta State and Rivers State.

ACKayleb:


Please anyone who has an idea of the above ☝️

Go to NSE website and register, select the category indicating applicants with COREN. You will pay an application fee.
You can send me mail

With 22k I can help you

ojonugway:


The house will be a regular sized 2 bedroom house. Small and modern. The land size is 150 by 100.
I intend to construct rentage houses on it in the future so the 2 bedroom house will be small.

Can I budget 10M for the project up til roofing?

Yes sir
May even be less than 10m to roofing level

ojonugway:
How much should I budget to completely build a 2 bedroom bungalow with 3 toilet? The roof will be flat hidden roof.

The land is secured and since it is buy and build, I want to do foundation first. I was told 1 to 1.5M should be enough for foundation because the land is flat with no obstacles.

I go like hear from pros here

Depends on the size of the building
However, 1.5m is likely ok excluding filling

There's this call I have received about three times now.
The caller identified as a client saying someone gave him my number that I can handle his construction project.
He later deflected the conversation into procuring cement and aggregate, that if I have dealers I should make contact so the materials can be delivered to the supposed construction site, that payment will be made on delivery.

Is this a new way of scamming, robbing, and kidnapping such dealers?

Eudes:


Ok. Thanks a lot.

You welcome

The cost is subject to the building design and finishing taste.
You should look at 25 - 35 million.
I did a roofing recently for a building sitting on a 100ft by 50ft plot
Woodwork took 2.1million
Aluminum Sheet (0.45) took 4.4million

Instead of using steel trusses, they went for wooden trusses for such a span.

Finishing underway !

Project description: 6 units of two bedroom apartment
Project location: Ubeji, Warri-south, Delta State.
Contractor: TOP-GIFT ENGINEERING SERVICES LTD

double3:

Nah lagos people plenty here, our people in the east need to wake up and embrace online marketing strategies. Been over a week I requested for a pop installer located witin enugu for my project down there,till date not a single mention.

Na wa ooo

Any dealer of rods, tiles, doors, here having a shop in Onitsha market?
Coming to get some materials in bulk tomorrow

Our current project in Warri-South Delta State.
Our services includes;
-Building design and Construction
-Road design and Construction
-Engineering Surveying

The FG will be rolling out grants and loans to support MSMEs shortly.
As a CAC accredited agent, let's help you register your business so you are eligible to apply.

1. Business Name ₦25,000
2. Company limited by shares #50,000
3. Incorporated Trustees (NGO) such as cooperatives, churches, associations, social clubs e.t.c #150,000

We also file post incorporation changes such as;
1. Add/remove director(s)
2. Add/remove shareholder(s)
3. Annual filing fee

Thank You!

topsy23:
Call us for your Nigerchin, Coleman, Kabelmetal and Witchtech cable today

Call or WhatsApp 08033643191

Prices of
1.5mm, 2.5mm, 4mm and 10mm bundle

elopetro:
The 5-Line 6-Point Green Beam Laser Level is your compact precision partner. With vivid green laser lines and six precise points, it simplifies alignment and leveling tasks. This versatile tool offers both horizontal and vertical lines, plus three vertical points for 90-degree layouts. Its compact size and lightweight design make it easy to carry anywhere. The green laser beams are highly visible, even in bright conditions, ensuring accuracy in all your projects. It's the perfect companion for DIY projects, ensuring you achieve professional results with ease. Upgrade your precision with the 5-Line 6-Point Green Beam Laser Level. 16 lines, 500m rotary laser, distance meter and safety boot available, call or send a message to the number on my signature...
Price from 15000 NGN[color=#006600][/color]

What's the price of your rotary laser level

I can connect you with a Town planner, who can assist you

Their death is so so avoidable.
RIP

Nwanyiogwashi:
Federal work and housing and raw material is recruiting.

I'm a Civil Engineer, how can one get a slot ?
If there's any way you can help I will appreciate.

Valme1010:
on Twitter myspace interaction we were advice to delete your emails if your email inbox is full and also remove the "B" on your email which might block spam messages and also cross check if you did put a wrong email address and finally that messages will still keep coming till Tuesday as some emails keep bouncing back ,so they are working on sending the remaining shortlisted message via test messages .

My email inbox is very free and in good working condition as I even got NDLEA mail during my registration.

omolola12345:
Happy Sunday house
Please what is up about the NDLEA recruitment test scheduled to hold from Monday to Wednesday? I am yet to receive any invitation. Please any information on this. Those that have started receiving invitation should please indicate

We dae same shoe ooo
I applied as a professional under Registered Engineers, I'm yet to receive any mail from NDLEA

I'm yet to get mail from NDLEA, I registered under the professional superintendent position.

Please I need current market rate for
Granite
Reinforcement 10mm & 12mm
6mm BRC mesh wire
River sand
Job location Bayelsa

mauchiz:

The guy said I should pay money for the training.

Same here
From the mail I received I'm to pay the 30k for the Certificate before we can proceed further.
Scammers

NiceTheDev:
Highlights of the meeting on Twitter space

Close of portal on the 17th
Two weeks for sorting of names so as to shortlist the names of those that are qualified for the exam
Two to four weeks for test
Training will start second week of June
These are what they have in plan as their milestones for the recruitment.

2nd week of June..

Is what is planned for applicants to be at training ground.

As said by the Agency Secretary during the meeting.

Absolutely true

With the said 10m, you should be able to complete
the carcass of a standard bungalow building including the roof and perimeter fence sitting on a plot size of 464.5 SQMTRS.

I did apply via email.
But couldn't get any info about the company when I checked online, INORBIT OIL AND GAS

I hope this message finds you well. As per our recent discussion, our company has decided to organize a one-week training programme for all new selected employees who do not possess a certified swimming certificate. This is a crucial skill in our industry, and we believe it is essential for all employees to have it.

The program will consist of basic swimming lessons as well as other important offshore work ethics, and will be led by experienced instructors. Upon successful completion of the program, you will be awarded a certified swimming instructor certificate, which will enhance your skill set and make you even more valuable to the company. Please note that the cost of the certificate is 30,000 naira.

In order to ensure the safety and wellbeing of all employees, a medical fitness test will also be conducted, and it is compulsory for everyone to participate. Accommodation, feeding, and transportation are all covered by the company during the program, and we will provide you with a daily allowance based on your performance and participation.

We are really excited to have you on board and we believe this training programme will be a great opportunity for you to improve your skills and advance your career. Please indicate your interest by replying to this email within 24 hours, as timing is of essence to resume your work.Tthe training will commence on the 24th april 2023

Thank you for your cooperation and we look forward to seeing you at the training. If you have any questions or concerns, please do not hesitate to ask.

Best regards,




[INORBIT OIL AND GAS]

Noblesammie007:
Hello Everyone,

Can one get a Coren certification is an engineering discipline other than what he studied in the University?
For instance, can someone with B.Sc Mechanical Engineering get a coren certification as a civil engineer if he has the requisite experience
working on civil engineering projects?

Your candid responses will be appreciated.

No you can't

Vickygirk:



Which browser you used?.

I tried with pc and phone still nothing.. the site opened with phone more than when I tried with PC

I used phone, Chrome

The site nor be am at all

OKOSISIBF:
please was it original document you uploaded.im in search of my original birth certificate

Yes, Original