Guys, please where can I buy Concrete Electric Pole in Ibadan?

Please, who knows the best place to buy floor tiles in Ibadan?

bolu1986:


Lagos but we travel

Price is for any of them

Share your WhatsApp contact.

kelvin1191:


Surface water is using the joints between the rings/rims to filter into the well.

Thanks. What's the best solution to fix such issue pls?

bolu1986:


1500 per sqm


Negotiable if the volume is much

Which one? Interior or External?
Where is your location?

Please guys, due to budget constraint, which Wall Screeding should be prioritized: Interior or External wall?

And please, what is the current price range per square meter (material + labour) for Exterior Screeding and Interior Screeding?

Thanks.

If you know about Water and Wells, please advise.

A Well Water that is usually very clean during the dry season turns whitish, milky and cloudy whenever it rains. Pictures attached.

The Well depth is 13 rings.

Please,
1. What could be the cause?
2. What can be done to remedy the situation?

Thanks.

Professionals in the house, I see these 2 options used in constructions and I'm wondering which one is better to be used for an Entrance Porch/Space of a Bungalow.

Which one is better: Metal or Glass?
Pls advise with reason(s).

Pls I need advice.

Do you advise I just pay for the total amount charged (Materials + Workmanship) by the POP Installer or I should ask him to tell the specific materials needed and I buy the materials myself and then ask him for labour cost separately?

Hi Guys,

Pls, is having cracks on plastered wall an issue to be worried about or it will be taken care of during painting?

I have attached the picture. Thanks.

POP guys in the house, I want to do POP for 4 bedroom bungalow of 150sqm total ceiling space.

How much will it cost please?

Interior Decor Professionals in the house, I want to do the installation I highlighted in red in the below picture in the kitchen.

I need the HDF ( I guess) to be properly suspended up there. Do I need to put something like a wooden board in that area before the POP covering? How can this installation be achieved please?

Thanks.

Good evening all!

Professionals in the house, please what is the ideal labour cost/workmanship for wall plastering of a 4-bedroom bungalow with all rooms ensute in Ibadan.

Dimensions (m):
Sitting Rm - 5.025 x 5
Dinning - 3.9 x 3.1
BR 1 - 5.25 x 4
BR 2 - 4.125 x 3.6
BR 3 - 3.6 x 3.6
BR 4 - 3.6 x 3
Kitchen - 5.1 x 3.8
Laundry - 3.075 x 1.8
Study Rm - 3.6 x 1.8
Ante Rm/Toilet - 3.285 x 1.85

Thanks in advance.

With an increasing middle-class population and a robust economy, the country's demand for air travel is surging.

Where the hell are these foreign media getting these false narratives about Nigeria? Increasing middle-class bawo?

Reality: Nigeria Middle class falling into poverty/low class on daily basis.

wapo:
The best agrochemical you can use are those that contains glyphosate e.g Forceup,glyspring, roundup etc because it will kill the grasses down to the roots

Thank you.

Professionals here, please what is the most effective, potent herbicides I can use for the type of weeds in the below picture?

natureherbsclin:
Treat your Diabetes with us.
We guarantee your good Results.

Truth is diabetes is not curable. It can only be managed.

Door Installer sorted. Thanks

sonnie10:

That is about the price of 3 feet ( #320 and above)
Zenith Architectural Hardwares LLC has this simple but elegantly designed 4 feet cast door for #380k

The price of casted door is on the high side for me. Please what other types of security doors would you recommend that are cheaper but durable and of good quality for entrance and exit doors?

sonnie10:

There are casted 4 feet doors from #380k and above.
Think about the engine block of a car, it is casted. Why? To withstand heat, pressure!
Casting means the metal was melted and poured into a mold to form the outer and inner sides of the door. Unlike ordinary doors that are sheets of pans welded together.
Did you know that those designs you see on ordinary doors are just embossed? Dem just pressed the pan sheet with something.

The resulting solid structure of casted door presents a unique ornamental decorative design that is armored and in one piece. No risk of cracking, sagging or shifting since there are no joints. This feature makes it last a lifetime.
I should also point out it’s efficiency in noise reduction both from inside and outside due to the thickness and tightness of the system.
Lastly, they’ve also found a way to add the color during molding process, so that the “color marries the metal” , so they don’t fade even when exposed to weather elements unlike ordinary spray painting .
This is a casted 4 ft (width) door
#420k

380 - 420k? Whao! I was thinking I could get casted for 300k. Thanks for the info.

sonnie10:
From Zenith Architectural Hardwares LLC
Metal door
3 feet width
7 feet height
Imported turkey brand

PRICE #125k

Note: Door is not casted

Please enlighten me about Casted doors.
I want to buy my front security door (4ft) and in search of something not too expensive but of good quality and well secured. What type of door would you recommend pls? Casted? Turkish or another type?
Thanks.

rmx:


Am sure he knows the place already . Sunrise . Bodija has been good to us

So, what's your shop address/description at Bodija?
Or where exactly is your shop located and address?

EgunMogaji2:


I prefer Maduabuchi (RIP) at Oke Bola or alternatively Iwo Road.

Thanks for the info. But are you saying the Oke Bola seller is dead? Is the place still selling? I'll also appreciate if you can share with me contact details or shop location description.

My people, please where is the main/major market for house Doors in Ibadan?

Adedward:
u are welcome boss, we are here to supply u, the windows

My advice is to go for casement windows embedded burglaries or sliding embedded with burglaries, dats latex design now,
And it will very durable, and strong, here are some pictures of it,

For the third picture you posted (the window),
What is the size (dimension) of the window?
How much does it cost for Grey colour type with 5mm glass, 16mm burglary and net?

An experienced Sonographer is urgently needed for immediate employment in Ibadan, Oyo State.

Salary is very competitive.

Qualified and Interested candidate should send his/her CV to cherithbrookwomenclinic@gmail.com using Sonographer as Subject of the email.

Haywhy433:


Ohh my neighbor lol
Knows someone that does it very good. Drop contact

Thanks Bro. But it should be the other way round; pls share the person's contact so I can reach out to him.

KolaShangOne:


Which area in ibadan is it?

Akobo side.

Please guys, I want to do Parapet (Full Casting) without buying/using woods so as to cut cost. I heard there is an option of using Molly (shaped Metal) for the casting instead of wood. Is this true? Does it actually safe money?

I need contact of someone in Ibadan who can cast the Parapet using this method.

I'll appreciate helpful comments/response please. Thanks.

Go Chelsea!

polimaf:
15.6” screen brand new laptop for 75k?

I’m thinking real hard!!!

You can get Hp 255 with amd processor for 82k but 75k, not sure of that.

Thanks for the info.

Where can I get HP 255 Laptop - Amd Quad Core - 500GB HDD - 4GB RAM for 82K? Any link pls?

I need a new laptop of screen size 15.6''.

My budget is N75,000.

Please advise on type/model to buy.

Thank you.