SaintUlot:
FOR SALE

1. This 12v pure sine wave inverter has the capacity to power 4 freezers @ the same time.

Capacity: 6000w Surge capacity and 2750w Actual capacity

Dc to Ac conversion efficiency : 90 - 95%
Idle consumption : 0.3 amp

It is a Non-grid tied Inverter. It powers Inductive and non-inductive loads seamlessly.

In the test video below, I used it to power all these appliances @ the same time:

👉 One normal freezer
👉 1hp pumping machine
👉charge spare battery
👉 one 32inch TV with Decoder
👉 2 medium sized fans
👉1 big ox fan

Then I switched off only the pumping machine to plug in the 1200w pressing iron


I have just one left, If you are interested in buying it, call or WhatsApp 08035537864



https://www.youtube.com/watch?v=0Rap3bnI07g

2. 12v 30A Smart Battery charger with digital display

It can be used to charge any type of Battery and it does not overcharge batteries, it is a smart battery charger, it adjusts itself to the amount of charge battery needs and stops charging once battery is full.

Uploaded below is the Smart charger picture.
Call or WhatsApp 08035537864 if you need it.

BrickDevo:
When will sujimoto finish this building? I wonder what is taking him so long to complete it, since 2020

Smartdoy:
Please I have a question.

Which is the most appropriate? Roofing before Gale bridge or Gale bridge before roofing

bolu1986:
Let’s go yours


Pop & wall screeding

07088534661

CELEBRITYSAND:





Sharp sand and stonedust 15 tons to Poka, Epe = 👇

Sharpsand 90k stone dust 110k
Thanks.
Note. Payment upon delivery to site 🙏

Thazard:
Hello Michlins

Please how much is this design sold in Onitsha.

Both the big one and the small one.

Noworries11:
My country people and elders in the building
Na my first time to build.... I kept bringing out money so tey i spent way above my budget just to get to lintel phase however please I need an advise for an estimate cost for the decking for a semi detached duplex (4 bedroom each duplex I.e 8 bedroom semi-detached duplex)

The site engr has estimated about #4,226,000 just for the rods (decking) while another engr on the side who is willing to handle has estimated #1,050,000

Brethren to say I am confused is an understatement

I decided to run here and perhaps get professional advice.
Please note that this is the cost for rod alone

Let me break it further how they arrived at the said amount

Site Engr;
70 lengths of 16mm rod @17,000 =#1,190,000
300 lengths of 12mm rod @9,400 =#2,820,000
50 lengths of 8mm rod-@3400 =#170,000
Binding wire = #45000
Total = #4,225,000

*Alternate Engr*

2) *ROD 16M² 25PIECES PER 1? N14,500× 25 = N350,000*

3) *ROD 12M² 60 PIECES PER 1? N9,200 × 60 = N552,000*

4) *ROD 8M² 30 PIECESB PER 1? N4,500 × 30 = N135,000*

6) *BANDING WIRE #20,000*

Total = N1,057,000

Please make una choke mouth for the matter

Philipok:
Contact me for ur artwork design,08165523784.

mexxy1:


I seriously doubt you did these else you won't deliberately cut out the phone number of the 'Art man' in the second picture while trying to advertise 'your job'.

mexxy1:


I seriously doubt you did these else you won't deliberately cut out the phone number of the 'Art man' in the second picture while trying to advertise 'your job'.

dannie007:
Contact for Security Doors and Internal Doors.

09090040008, 08066377733.
Whatsapp or Call

OX Multiservices

oracle009:
My people... I am here again o. My head is just doing gbas gbos at the moment. The estimates my contractor gave me (less than 1 month again) is about 1m+ off for each activities. Very unreliable estimates. These have greatly affected my planning.

Please I need a quote for roofing 270sqm. I need to know the roofing options that I have (cheap, cheaper, cheapest ). I have attached the former quote my contractor gave me (white) and the house plan.

Note: the roof dimension na 270sqm.

I also need quote from someone who make bulglary, aluminum windows, iron door and american panels.

I also need for POP also. I want to start taking actions myself currently because they don almost make me craze

I am willing to contract reliable people here if we have a good deal compared to what's on ground. The project is in Abeokuta, so let's also think about proximity to service center. I am opened to DM after confirming your service from gurus here.
E se o. We no go get hypertension o

michlins:
come for your metal doors, handrail plus window burglaries and tank stand. Offered such services for many people here and the building below is one of such projects I have handled here

oracle009:
My people... I am here again o. My head is just doing gbas gbos at the moment. The estimates my contractor gave me (less than 1 month again) is about 1m+ off for each activities. Very unreliable estimates. These have greatly affected my planning.

Please I need a quote for roofing 270sqm. I need to know the roofing options that I have (cheap, cheaper, cheapest ). I have attached the former quote my contractor gave me (white) and the house plan.

Note: the roof dimension na 270sqm.

I also need quote from someone who make bulglary, aluminum windows, iron door and american panels.

I also need for POP also. I want to start taking actions myself currently because they don almost make me craze

I am willing to contract reliable people here if we have a good deal compared to what's on ground. The project is in Abeokuta, so let's also think about proximity to service center. I am opened to DM after confirming your service from gurus here.
E se o. We no go get hypertension o

oracle009:

E se o. We no go get hypertension o

oracle009:


I will call you

oracle009:
My people... I am here again o. My head is just doing gbas gbos at the moment. The estimates my contractor gave me (less than 1 month again) is about 1m+ off for each activities. Very unreliable estimates. These have greatly affected my planning.

Please I need a quote for roofing 270sqm. I need to know the roofing options that I have (cheap, cheaper, cheapest ). I have attached the former quote my contractor gave me (white) and the house plan.

Note: the roof dimension na 270sqm.

I also need quote from someone who make bulglary, aluminum windows, iron door and american panels.

I also need for POP also. I want to start taking actions myself currently because they don almost make me craze

I am willing to contract reliable people here if we have a good deal compared to what's on ground. The project is in Abeokuta, so let's also think about proximity to service center. I am opened to DM after confirming your service from gurus here.
E se o. We no go get hypertension o

alphabbey1:
I need someone to please criticize this quote given by an engineer...

Estimation For Decking

IRON- y16. 75length @ 18,000
Y12.400 length @ 10000=
Y10.98. Lengths@6500
Labour 200,000
Transport 30,000
Total = 4,825,000

Woods
1 by 6 200pic@800 =160,000
1 by 9 50pic @1600= 80,000
2 by 3 300pic @ 600= 180,000
1 by 12 420pic @ 1800=756,000
3inch Nail 2 bags 45,000
2inch Nail 2 bags 40,000
4inch Nail 1 bag. 22,000
Binding wire 20kg 32,000
Bamboo 400pic @1200=480,000
Workmanship 250,000
Total =2,045,000

MATERIALS FOR CASTING
2 HOWO 200,000
Gravel 40tons@6500=260,000
Transport 70,000
Dust 30ton 6500= 174,000
Transport 55,000
Filling 30,000
Casting 300,000
Water 50,000
Vibrator Available
Curing 5days 5000
Total 3,080,000

Electrical
8pack of 20mm pipe @ 12,000=96,000
5 pack of 25mm pipe @ 16,000= 80,000
4pkt’s 20mm cop 3000=12,000
2pkt of 20mm cop small@1900=3800
4pkt of 25mm cop 2000=8,000
1 pvc gum big one =4000
Workmanships. =. 60,000
Total 263,800

Plumbing
4” pipe 6pic @ 4500=27,000
4” elbow 10pic @1000= 10,000
2” pipe 15pic. 2500=37,500
2”elbow 15pic. 500=7,500
2” tee 10pic. @ 500=5000
4” tee 10pic@ 1000= 10,000
4by2 tee. 8pic@1200= 9600
Abro gum. =9000
PPR pipe 5pic 2000=10,000
Workmanships = 50,000
Total 175,600

Total = 10,393,600



The stages of the work is below and stage 4 is about to start

Stages of the work
*FOUNDATION LEVEL
*BLOCK WORK AFTER DPC BEFORE THE LINTEL
*LINTEL AND LEVELING BEFORE DECKING
*DECKING, SLABING BEFORE THE FIRST FLOOR
*FIRST FLOOR, BLOCK WORK
*LINTEL AND LEVELING
*PARAPET AND ROOFING

Deeegbee:


How much is the 1st door in the picture?

dannie007:
170k Sir Full HDF Door installation and Good quality Key locks