zube01:
OK but downloading such a heavy file from play store with this our network is next to impossible

Download via WiFi then.
Or download in the night.

Karmanaut:

For the love of Pete....
Preloader is the boot loader.
Why on earth would you flash a new boot loader?
You shouldn't have ticked it.
Your device is hard bricked.
Does the PC recognise it?
Take it to a reputable phone engineer, they might be able to save it, if they can't you'd have to get a new motherboard entirely, and that's like getting a new phone.

Maybe you can take it to Carl Care.
Tell them you downloaded an update then while it was installing your battery died/phone went off.
If they buy the story they should fix it for free.

Good luck.

thanks

Fortune440:

thanks

if u have lost total hope i can brng the fone bck to life whatsapp me on 09033365257

pls i have a problem with my tecno H7, if i plug charger it wil show charging but d percentage is not increasing..infact it decreases...av tried different chargers bt didnt work...pls i nid help

Ezekielkizzex:
pls i have a problem with my tecno H7, if i plug charger it wil show charging but d percentage is not increasing..infact it decreases...av tried different chargers bt didnt work...pls i nid help

Change the battery.
See if it works.

Fortune440:
I use infinix hot note
pro, i tried flashing from
lollipop to stock kitkat ROM. I
tried flashing with sp flash tool
but it said pmt changed for
rom must be downloaded. so I
formated then flashed. there
was no interruption, the
flashing completed. but my
phone wouldn't on at all,
charge, and its not detected by
my PC.. note: I had all files
including preloader.bin.. What should I do please

You shouldn't have formatted. That was your error.

What you need to do is to:
1. Send it to carlcare.

or if thats not feasible or you out of warranty

2. Flash again.

To do this, open the phone. unscrew it and disconnect the battery from the board gently. BE CAREFUL, dont damage the battery connector.

Now load the scatter file in SP Flashtool, start the flash (as is done normally) then plugin the phone

It will detect it and flash the device.


when done, reconnect the battery and try boot. if its ok, switch it off and return the screws.

if it completes the flash and still does not work, go to carlcare

if it does not flash, check your steps well again.

Either way i wish thee luck
End

4llerbuntu:


You shouldn't have formatted. That was your error.

What you need to do is to:
1. Send it to carlcare.

or if thats not feasible or you out of warranty

2. Flash again.

To do this, open the phone. unscrew it and disconnect the battery from the board gently. BE CAREFUL, dont damage the battery connector.

Now load the scatter file in SP Flashtool, start the flash (as is done normally) then plugin the phone

It will detect it and flash the device.


when done, reconnect the battery and try boot. if its ok, switch it off and return the screws.

if it completes the flash and still does not work, go to carlcare

if it does not flash, check your steps well again.

Either way i wish thee luck
End

do i flash with the battery plugged in?

Karmanaut:

Change the battery.
See if it works.

I hav changed the ba3 bt it didnt work...bt wen i charged d ba3 wit desktop charger it charged

Ezekielkizzex:
I hav changed the ba3 bt it didnt work...bt wen i charged d ba3 wit desktop charger it charged

Then it seems to be a hardware problem.
Most likely your charging port.
Take it to q reputable phone engineer.

nice posts and comments.... learnt a lot

Karmanaut:

Then it seems to be a hardware problem.
Most likely your charging port.
Take it to q reputable phone engineer.

the phone was given 2 me 2days ago nd d charger the person was using was charging the phone well bt wen he gav me d phone he didnt giv me d charger..so i used another charger to charge it bt didnt work...i used 2 chargers bt to no avail...it wil show chargin bt its not increasing...so the charging port cannot jst spoil soon as he gav me d phone...am suspecting the chargers or a software problm..am thinkin of reseting the phone..bt derz not MCard inside to backup anythg...if i reset it without backup will it crash the phone?

Ezekielkizzex:
the phone was given 2 me 2days ago nd d charger the person was using was charging the phone well bt wen he gav me d phone he didnt giv me d charger..so i used another charger to charge it bt didnt work...i used 2 chargers bt to no avail...it wil show chargin bt its not increasing...so the charging port cannot jst spoil soon as he gav me d phone...am suspecting the chargers or a software problm..am thinkin of reseting the phone..bt derz not MCard inside to backup anythg...if i reset it without backup will it crash the phone?

If you can collect his charger, see if it'll work.
If it doesn't then it's definitely a hardware problem.
If you reset the phone everything in the phone will be deleted.

Karmanaut:

If you can collect his charger, see if it'll work.
If it doesn't then it's definitely a hardware problem.
If you reset the phone everything in the phone will be deleted.

okay...thanks for ur help...what about flashing...can i handflash the fone?

Ezekielkizzex:
okay...thanks for ur help...what about flashing...can i handflash the fone?

If you're not confident enough, sure.
Google the procedures.
Check the _hovatek forums for the stock ROM for your device.

Fortune440:


do i flash with the battery plugged in?

No. The battery is unplugged throughout the flashing....

Pls i want to buy a cheap andriod phone of 12k-15k either tecno,gionee.you suggestion will be apperciated thanks

Karmanaut:

Reboot to recovery and wipe cache.

same problem still persists

pls how cn i repair damaged/corruptd images and videos on my phone

Oshlander:
Evening gurus in the house! I need your help please. I have a Tecno droid 7c phone which I suppose supports OTG, as written on the package box. I just received an OTG cable delivery from Jumia today and on plugging it to the phone, nothing happened. I connected a USB flash modem(Glo Bolt) with memory card in it to the phone through the OTG cable, yet nothing happened. I went online to know what's happening, I came across USB OTG Checker, the results of the tests are the screenshots. Please what do I do? This is my first time to use the OTG. Thanks, God bless you as help me out!

Maybe it does not support the Glo modem. Try another otg source. By the way, what's the name of your font?

Mykcool:
same problem still persists

Take it to Carlcare then.

Pls help me o....my iphone 6 jst got stalk"showing no command " on d screen

samkevie:
Pls help me o....my iphone 6 jst got stalk"showing no command " on d screen

" no command "
Is there a picture of a robot lying on its back?
If so I have bad news for you.

buchito1:
Hey guys...I broke my Samsung Galaxy S4
screen,
wanting to replace it but the back.and options
button has refused to work... They have tried
more than 6 screens... Both Brand new and
Belgium used, but all to no avail... I don't see
the need using a phone when the buttons
can't work...
Please if u have any ideas of if such had
happened to you, pls what are we missing
I need my phone back... Hasn't being long I
got it.. Thanks

What about enabling onscreen buttons.?

Karmanaut:
" no command " Is there a picture of a robot lying on its back? If so I have bad news for you.

nothing like that....

samkevie:
nothing like that....

Can you take a picture of it?

4llerbuntu:


What about enabling onscreen buttons.?

Yes i thought about that... Won't it be awkward?

When theres a button on the fone for that, I go come put am for screen? After paying 15k

Think am naah...

What am I thinking?

Very funny. Ehn sell the phone as scrap then. Since you think there's some magic and status attached to the physical buttons

Please I need your help here. I need a phone with at least 13mp primary camera, octa core processor, 5.5" display, 2GB ram, and a lollipop. I would ve gone for innjoo fire plus but the criticism is killing. Any advice?

Ezekielkizzex:
okay...thanks for ur help...what about flashing...can i handflash the fone?

It's not a software issue... It's simply the CHARGER. Look for a good and original charger and check the voltage compatibility! Goodluck!

4llerbuntu:


You shouldn't have formatted. That was your error.

What you need to do is to:
1. Send it to carlcare.

or if thats not feasible or you out of warranty

2. Flash again.

To do this, open the phone. unscrew it and disconnect the battery from the board gently. BE CAREFUL, dont damage the battery connector.

Now load the scatter file in SP Flashtool, start the flash (as is done normally) then plugin the phone

It will detect it and flash the device.


when done, reconnect the battery and try boot. if its ok, switch it off and return the screws.

if it completes the flash and still does not work, go to carlcare

if it does not flash, check your steps well again.

Either way i wish thee luck
End

I've done as you said bro, the phone is on now but is on boot loop.. on the xui screen.. what next please.

karmanaut your help is also needed pleasr


it has worked!!! I was impatient, it has finished booting