Stats: 3,187,875 members, 7,933,271 topics. Date: Tuesday, 27 August 2024 at 11:14 PM |
Nairaland Forum / Nairaland / General / Properties / General Topic Thread-To Discuss Anything And Everything in Building Construction (4667990 Views)
Discuss Anything Property And Lets Make Money In The Process / Residential Building Construction Mistakes In Nigeria You Need To Avoid / General Topic Thread - The Roforofo Thread Of Construction Activities (2) (3) (4)
(1) (2) (3) ... (59) (60) (61) (62) (63) (64) (65) ... (3744) (Reply) (Go Down)
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by abdulwastecx(m): 12:25pm On Oct 25, 2015 |
johnson232: Rib slab are done on floors with relatively medium to low live load ( load of occupant, furniture and other variable loads), in most cases for residential ( live load for residential 1.5kN/m2), schools, hotels (2.5kN/m2) all these details can be gotten from BScodes. The ribs are design as small beam running perpendicular to the longer side of the slab (ly), and parallel to the shorter part of the slab (lx). the rib are spaced at design distance ( from BS 8110), the space between the beam is occupy by this non structural polystyrene. A concrete topping of not less than 75mm is placed on top of this polystyrene to protect the polystyrene and provide a moving surface for occupant above the suspended floor. a wire mesh is provided inside the toping to control cracking of the concrete. i will do a sketch to buttress my point. 3 Likes
|
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Aventures(m): 12:27pm On Oct 25, 2015 |
brabus: Uptill yesterday I am still working to comfirm the visibility of this method. I am to continue work on it this afternoon hope to complete it today. it is a combo of some foundation type not really new in the world but I am sure it is new to Nigeria somehow I hope I am right sha. It has been used in the Germany and Singapore for high rise building on a critical soil type. But their method is cost crazy, what we are doing is to modified the method to make it cheaper, and the most challenging aspect is to back it up with design a best practice. 2 Likes |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by brabus(m): 12:39pm On Oct 25, 2015 |
abdulwastecx: ______ Youll soon understand why I quoted this post soon. The silent followers have seen this. I knew a time like this will definitely come and it will be my joy to associate with people who not only know how it works but where it fits. https://www.nairaland.com/1588017/nexthome-builders-2014-2015-new/4#29974472 https://www.nairaland.com/1588017/nexthome-builders-2014-2015-new/4#29950589
|
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by smiley001(m): 12:45pm On Oct 25, 2015 |
adeekiti: lol... Thanks Sir... Manshester shitty go show u Manshester disunited today... *Runs away* 1 Like |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Nobody: 1:16pm On Oct 25, 2015 |
Sir, watch and count our goals against city , city must fall ![]() smiley001: |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by abdulwastecx(m): 1:47pm On Oct 25, 2015 |
johnson232: polystyrene can be use in slab ( ribbed or waffle slab), this will reduce load on beams, thereby reducing beam section (weight) and reinforcement 4 Likes |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by KolaShangOne(m): 1:52pm On Oct 25, 2015 |
johnson232: It can't be used for beams.. Just the rib slab. @abdulwastecx In terms of cost and availability of materials, which would be better to use between Polystyrene and the clay pots for reduced load on the structure? I have a feeling clay will be cheaper. What do you think?
|
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by abdulwastecx(m): 1:55pm On Oct 25, 2015 |
KolaShangOne: availability of materials= clay block cost = polystyrene reduced load/ weight = polystyrene speed of construction = polystyrene |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by KolaShangOne(m): 2:23pm On Oct 25, 2015 |
abdulwastecx: Same way it will reduce beam section weight is the same way it will reduce the ability of the beam to carry the imposed load especially on a multi rise structure |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by erico2k2(m): 2:37pm On Oct 25, 2015 |
EgunMogaji:hahah baba himself, true talk,we for put .com at the end too ![]() ![]() ![]() 1 Like |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by erico2k2(m): 2:40pm On Oct 25, 2015 |
smiley001:Make una no start oh, we all be manU fans today, all Arsenal fans are Supporting Man u to beat Man city 1 nil, nothing more ![]() ![]() 1 Like |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by erico2k2(m): 2:43pm On Oct 25, 2015 |
mufutau55:Thank U very Much sir |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by erico2k2(m): 2:44pm On Oct 25, 2015 |
twinskenny:Thank you very Much oh and yes, I just have to steal that phrase eheh ![]() ![]() 1 Like |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by johnson232: 3:00pm On Oct 25, 2015 |
abdulwastecx:God bless u... I'm really enjoying this lecture. This is nice, In that case, what will the polystyrene (p) be resting on as illustrated in the diagram? Or Will it be able to support itself after the curing of the whole slab? |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by abdulwastecx(m): 3:35pm On Oct 25, 2015 |
KolaShangOne: it doesn't reduce the ability of beams to carry imposed load. for example, a simple slab with the following loading condition 1. live load (Qk) = 1.5kN/m2 slab thickness = 150mm weight of floor finishes = 1.2kN/m( assumed value) 2.dead load on such slab( Gk): self weight of slab = 0.15x24 = 3.6kN/m2 Gk = 3.6+ 1.2 = 4.8kN/m2 design load (w) = 1.6Gk + 1.4Qk w = 6.72+ 2.1kN/m2 = 8.82kN/m2 summary: for a typical dwelling unit of a design load 8.82kN/m2, out of which dead loads account for 76.2% ( 6.72kN/m2). Conclusion: dead load can be reduce by introducing a lighter materials at some section of the floor slab ( provided live load not heavy). 1 Like |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by podosci(m): 3:37pm On Oct 25, 2015 |
I got the picture below off the internet but have personally used the polysterene for my concetre facial and the results was fantastic. Its lighter and more flexible in terms of usage than the clay pots. 1 Like
|
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by brabus(m): 3:38pm On Oct 25, 2015 |
abdulwastecx: Can you do cost analysis of using polystyrene for a 312 m2 pent slab? I can forward you the design and calculation sheet. My initial plan was to do I-section to reduce the load coming on the first floor slab. |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by abdulwastecx(m): 3:39pm On Oct 25, 2015 |
johnson232: The section of the poly strip is design with inward depression that allows concrete to flow into it casting. i will try to get a sketch to give better explaination |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by abdulwastecx(m): 3:44pm On Oct 25, 2015 |
brabus: yes sir.....i will do that, but you will pay me o lol 3 Likes |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by segcymoor(m): 3:50pm On Oct 25, 2015 |
brabus: Yes. Cellular foundation may be used to soft some foundation problems but only in some area. To start with, Cellular foundation is ideal where soil improvement has been recommended by soil test analysis.( I think I doubt if possible in ogudu orioke where 24-27m depth is being recommend) But to be factual this form of foundation is quite cumbersome and even may be costly .Thorough supervision is required that all top soil is excavated before concrete blinding. However, the most easy and safest form of foundation is Pilling! ---------- Although tend to fail if not properly done 1 Like |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by brabus(m): 4:01pm On Oct 25, 2015 |
KolaShangOne: Oga Kola! Happy Sunday. This seems very much like hollow clay-pot suspended slab construction. One guy building near one of my project site was able to pull up 5 floors within 6 months using the clay-pot. I noticed the rc beams which were normally required in standard in-situ construction over long span were eliminated. They were not only able to save on time. They were also able to save on materials. Oga abdulwastecx, is it the same construction as hollow clay-pot? |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by brabus(m): 4:03pm On Oct 25, 2015 |
abdulwastecx: I won't pay you. You will pay me because you will handle the job. How about that? ![]() ![]() But you can pass your bill though. |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by brabus(m): 4:10pm On Oct 25, 2015 |
segcymoor: Baba Agba! Yes, they did a cellular raft in Ori-Oke. It was even a Nairalander project done in 2011. I think Gbagada and Akoka are the worst terrain to build in Lagos. 40m depth in some part of Akoka (Not all that glitters are gold). I saw a 3 floor building vanished completely with my korokoro eyes in Akoka. @chekitaut, the green building beside where you supplied is actually a storey building and not a bungalow. A whole floor has vanished completely. Maybe, it's worth it to open discussion on worse terrain to build in Lagos. |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by mavverick: 8:09pm On Oct 25, 2015 |
brabus: Busy day, I have a lot to come and I will be showing it to you the more you keep opening your mouth to prove a point to me. I had a qualified structural engineer visit site, not a computer technician turn builder overnight or textbook builder or scam artist. ![]() I mean who does this out of wickedness, why and how on earth would you mix cement bag with concrete. Something that can be easily pulled off and thus pulling off some of the concrete fabric as well. This was all under the watch of brabus / bosun. ![]() Because I said i would supply my own materials, he has decided to expose them to the elements so that they will rust and thus prove a point to me. ![]() Terrible job everywhere, all under his watch (brabus Bosun Davies) ![]() Same nonsense, never cared to retify it. ![]() Absolute disgrace, why would you bring your brother or plumber or whatever to my site, collect a lot of money from me and still do a shoddy job like this. I really dont like breaking concrete, but what can we do here ![]() ![]() Missed out a beam here, I will have to reinforce it somehow now. ![]() Is it not supposed to be straight ?? ![]() Who in their right state of mind would rest a pillar on block work ![]() Now anyone can say this is all sour grapes, but I am just exposing what bosun/brabus is really like. I mean, would he claim that i am owing him money, not enough materials or what ?? 2 Likes |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by befto: 10:01pm On Oct 25, 2015 |
@mavverick, Are you saying brabus did this work? you mean this shoddy job was done by the same brabus who comes on here and acts like a building Evangelist? Never ceases to amaze me with this guy's impunity. Always thinking people are against him without showing any kind of remorse. This is a disgrace to the building profession and I hope the other builders on this site can speak up on this. This guy should not be allowed to get away with such atrocities by saying that the other clients are still in contact with him for advice. So what? is that an excuse to keep producing such dangerous constructions for his clients. You come on here and comment on other posts and act like you are a real professional but you are just a well packaged cowboy. It's amazing how other people on this site seem to give you props when they know what you are really like. You are a disgrace to the other Credible builders on this site. Are you going to compensate Maverick for this shoddy job? mavverick: 2 Likes |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by mavverick: 10:29pm On Oct 25, 2015 |
befto: Oga Befto YES BRABUS did all this shoddy work. And I challenge him to come here to deny it !! Defrauded me in the process and hence why he wanted to bribe my security with 10k to steal materials. The fact that he comes online to offer advice and act like a subject matter expert despite no building qualifications but the qualification of a scam artist. I am compiling a dossier of all other terrible work that he did and they will henceforth follow him on the digital world, the accomplice who defrauded me with fake building approval, I am putting final touches to dealing with him as well. I am not letting this GO. 7 Likes |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by erico2k2(m): 11:51pm On Oct 25, 2015 |
mavverick:I don't want to mention names oh but if anybody did that in my house he/she will refund my labour cost or else,Im going to my village priest,the Igwe must hear about it ![]() ![]() ![]() 1 Like |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by mufutau55(m): 11:58pm On Oct 25, 2015 |
erico2k2: You talking about Igwe? Igwe ke? Dem no get Babalawo for your village? Abi nah Okija shrine sef, if you get that for your village. What is cement bag doing in a concrete decking slab if there is adequate supervision... abi nah top of the decking dem dey mix the concrete? And what is that last pic; nah column (pillar) be that? Seeing those pictures, I am more than disappointed. Me I no be Builder/Engineer o! Hajji M. 2 Likes |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by erico2k2(m): 12:05am On Oct 26, 2015 |
mufutau55:Abi oh, the first four pics I recon a good poker machine would have been able to vibrate the fat into the core of the box to make the concrete even, as for the bags, me I nor knoo 1 Like |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by brabus(m): 12:11am On Oct 26, 2015 |
All liars will go to fire! Brabus did not do the job. How did I know? Brabus' work stopped at the first slab. Check the pictures, if pillars not connecting each other and ask the Oga above which iron bender did the upper floor slab and who engaged him? |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by mufutau55(m): 12:19am On Oct 26, 2015 |
brabus: Only Brabus and Mavverick knows the person who did that job. But whoever did that job should lose his/her license (if there is any) and my Babalawo would have still heard about it. Hajji M. 1 Like |
Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by brabus(m): 12:29am On Oct 26, 2015 |
I don't take cut out pics. Here are full pics of the floor that Brabus did. Let your SE meet me any day anytime to price this were not done by me. Lintels
|
(1) (2) (3) ... (59) (60) (61) (62) (63) (64) (65) ... (3744) (Reply)
Viewing this topic: Rawgold300 and 2 guest(s)
(Go Up)
Sections: politics (1) business autos (1) jobs (1) career education (1) romance computers phones travel sports fashion health religion celebs tv-movies music-radio literature webmasters programming techmarket Links: (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Nairaland - Copyright © 2005 - 2024 Oluwaseun Osewa. All rights reserved. See How To Advertise. 76 |