Please can u send ielts questions to me. Pps i beg u

einsteino:


sent.

If you use android, I would advise you also get apps on playstore for it.

Please send IELTS Question to me via my email: solad5159@yahoo.com thanks and God bless

einsteino:


sent.

If you use android, I would advise you also get apps on playstore for it.

@Jukeblam, Bro you can send me a mail ohioilserve@gmail.com. My pm seems to have an issue.

@Oga Bellong
thanks for the prompt response oh may God really bless you.
As a mechanical engineer as I told you before ,but I was employed as an NDT engineer with five years experience with company A and one year experience with company B, then 2 years and six months with company C which is the multinational .So the other time i asked if i could nominate mechanical engineering technician , which you reply that i should do. But after going tru the job descriptions and all the trainings i ve undergone these past few years of my experience , i came to a conclusion that it didn't really match. But it matches with Metallurgical or Materials Technician which are being assessed by vetasses . So please what i want you to advice me on is that though i did not study metallurgy or materials engineering but i have all my years of experience in NDT and i also ve lots of training and their certificates in NDT and other trainings related to the metallurgy or materials engineering technician .so please can you advice me to still go ahead with the mechanical engineering technician or I can go ahead to nominate metallurgy or materials engineering technician knowing fully well that i am a mechanical Engineer. I look forward to your kind response.

thanks

Tunatebabe:
@Oga Bellong
thanks for the prompt response oh may God really bless you.
As a mechanical engineer as I told you before ,but I was employed as an NDT engineer with five years experience with company A and one year experience with company B, then 2 years and six months with company C which is the multinational .So the other time i asked if i could nominate mechanical engineering technician , which you reply that i should do. But after going tru the job descriptions and all the trainings i ve undergone these past few years of my experience , i came to a conclusion that it didn't really match. But it matches with Metallurgical or Materials Technician which are being assessed by vetasses . So please what i want you to advice me on is that though i did not study metallurgy or materials engineering but i have all my years of experience in NDT and i also ve lots of training and their certificates in NDT and other trainings related to the metallurgy or materials engineering technician .so please can you advice me to still go ahead with the mechanical engineering technician or I can go ahead to nominate metallurgy or materials engineering technician knowing fully well that i am a mechanical Engineer. I look forward to your kind response.

thanks

guy u be engineer and ur experience can still be placed under mechanical. Get assessed via EA. thank God.

Good evening all gurus,

I am a quantity surveyor with over 3 years working experience, graduated from OAU. I checked SOL and found Quantity Surveyor 233213 to be assessed by AIQS,
Assessment fee $650
After critically research, i realised that I have the following points

Age: 30 points
Skill employment3-5yrs) 5 points though to be determined by assessing body
Qualification: 15 points
English test: IELTS pending (to be taken in November)
Total for now : 50 points

Assessing body AIQS requested for IELTS(at least 6 in all section) but didn't specified whether general or academic, please which module should I do?
I have not seen any quantity surveyor on this thread, any Qs that has passed through this stage please enlighten me.


Cc: bellong , jukeblam , akinnawou , sammywemmy and other gurus please help.

Just take General.

SAMUELS3:
Good evening all gurus,

I am a quantity surveyor with over 3 years working experience, graduated from OAU. I checked SOL and found Quantity Surveyor 233213 to be assessed by AIQS,
Assessment fee $650
After critically research, i realised that I have the following points

Age: 30 points
Skill employment3-5yrs) 5 points though to be determined by assessing body
Qualification: 15 points
English test: IELTS pending (to be taken in November)
Total for now : 50 points

Assessing body AIQS requested for IELTS(at least 6 in all section) but didn't specified whether general or academic, please which module should I do?
I have not seen any quantity surveyor on this thread, any Qs that has passed through this stage please enlighten me.


Cc: bellong , jukeblam , akinnawou , sammywemmy

@ Oknee
Thanks for the info,so far! Checked QLD, the financial requirement is like a mountain, any way around it? tnx my chief!

piusford:
@Timikemzo2

You mean, your assessing body called your employers?

Yes they did and also sent representatives to visit the facility.

@Oga Udz
Thanks for your quick response. Really I for apply directly as a MECH engineer and being assessed by EA. But unfortunately, na HND I get, because I see BSC. SO that's why I am trying the other alternatives. Any other advice I dey wait ohhhhhh.
Thanks

Tunatebabe:
@Oga Udz
Thanks for your quick response. Really I for apply directly as a MECH engineer and being assessed by EA. But unfortunately, na HND I get, because I see BSC. SO that's why I am trying the other alternatives. Any other advice I dey wait ohhhhhh.
Thanks

I am not an engineer, I do not know the detailed description of an NDT engineer but I do know that you can write your description relating to mechanical technician.

You are better off assessed with EA as mechanical technician than with VETASSES.

Tunatebabe:
@Oga Udz
Thanks for your quick response. Really I for apply directly as a MECH engineer and being assessed by EA. But unfortunately, na HND I get, because I see BSC. SO that's why I am trying the other alternatives. Any other advice I dey wait ohhhhhh.
Thanks

no fear, make PTE ur wife. if u get 20points there, no shaking. ur HND go give u +ve assessment with EA as per technician or technologist Kia Kia. ur age and experience go butter ur application and u go get ur Kpali sharp sharp. But Abeg no forget to tithe me oo before u kawa. haha...

solad5159:
Please send IELTS Question to me via my email: solad5159@yahoo.com thanks and God bless

done.

@oga UDZ and Oga Bellong thanks ohhhhhh for your quick response.
But please one more question and I no go disturb una again.
As for mechanical engineering technician, they are being assessed by TRA and not EA. or una suggest I apply directly as a mechanical engineer thru EA? I and dey go accept my HND ? also my HND was from petroleum training Institute (PTI).or do you think my HND dey equivalent to their BSC ? Thanks once more you guys are great. Cheers

@oga udz
Please I also found out that , EA don't accept PTE English exams.

@Tunatebabe,

NDT is non destructive testing right?

All your options get as e be.

VETASSESS assess NDT technician but it is sponsored by South Australia and Northern territory.

Mechanical engineering draftsperson is assessed by EA and sponsored by Victoria and Tasmania.

Mechanical engineering technician assessed by TRA and sponsored by Tasmania while it is on restricted in South Australia.

So rule out mechanical engineering technician. I think it is appropriate you go for any of the first two.

bellong
Please help me with answers or help point me in the right direction. Thanks.
I am interested in migrating to Australia and only just started asking questions. I am and i noticed that though is not on the SOL, it is on the CSOL.
what are my chances with applying for a state sponsored visa?
should i just start a masters degree instead?
would applying for PR affect my chances of getting a student Visa if i apply for students visa while waiting for my PR to be processed/ materialize?
is it advisable to use an agent or is it something i can figure out on my own?
Thanks in advance to anyone who will be willign to give me some advice.

@Soopamom,

Starting a master's degree is a waste of money and resources. At least Northern territory sponsors the occupation.

Read the pharmacy council website for assessment requirements. It is pretty straightforward.

You don't need an, agent, you can do it yourself. If however you think you don't have time, you can consider agent.

Migration agents charge between $3000 - $5000 depending on your circumstance and situation.

Let me know if you need an agent.

Tunatebabe:
@oga udz
Please I also found out that , EA don't accept PTE English exams.

yes o, I said pte because it's easier to score 20points. EA use ielts but u ain't aiming for points with that. u have to just do fine. Finally, am not oga. no deceive itself. haha..

Good afternoon gurus in the house, you are really doing a wonderful job here.
@oga UDZ and Oga Bellong
As per partner's qualification, can you claim 5points on that without being legally married yet?

timikenzo2:

Yes they did and also sent representatives to visit the facility.

In Nigeria?

timikenzo2:

Yes they did and also sent representatives to visit the facility.

In Nigeria?

Tunatebabe:
@oga udz
Please I also found out that , EA don't accept PTE English exams.

also look at engineering technologist, it's on sol and csol, assessed by EA. ur HND and experience as NDT will fly here. As I said earlier use PTE to gather much points as ur HND will give u 10point unlike B.Sc that should give 15point.

Bnimz:


wait o, isn't 90 the maximum possible score??

I had to go check their website, you're actually right, I didn't know and I did not read anything, I went to practicepte.com and practiced 2 exam scenario questions, good to know though, but the koko is my vetassess outcome, its not by PTE alone. Cheers.

chidike:

I had to go check their website, you're actually right, I didn't know and I did not read anything, I went to practicepte.com and practiced 2 exam scenario questions, good to know though, but the koko is my vetassess outcome, its not by PTE alone. Cheers.

Well-done bro, 'em never release my result oh, abi, dem dey copy Naija's JAMB and WAEC ni?
Did you do it at Ikeja?

mamajaz:

Well-done bro, 'em never release my result oh, abi, dem dey copy Naija's JAMB and WAEC ni?
Did you do it at Ikeja?

Ukeas Ikeja

udz:


no fear, make PTE ur wife. if u get 20points there, no shaking. ur HND go give u +ve assessment with EA as per technician or technologist Kia Kia. ur age and experience go butter ur application and u go get ur Kpali sharp sharp. But Abeg no forget to tithe me oo before u kawa. haha...

.
udz,

please do you know if HND Accounting and MBA could give +ve assessment from CPA. Am about sending my request and I have been trying to get some1 who has used CPA. Please I need help urgently.

udz:


no fear, make PTE ur wife. if u get 20points there, no shaking. ur HND go give u +ve assessment with EA as per technician or technologist Kia Kia. ur age and experience go butter ur application and u go get ur Kpali sharp sharp. But Abeg no forget to tithe me oo before u kawa. haha...

.

udz,
please do you know if HND Accounting and MBA could give +ve assessment from CPA. Am about sending my request and I have been trying to get some1 who has used CPA. Please I need help urgently.

udz:


also look at engineering technologist, it's on sol and csol, assessed by EA. ur HND and experience as NDT will fly here. As I said earlier use PTE to gather much points as ur HND will give u 10point unlike B.Sc that should give 15point.

Engineering technologist still requires bachelor degree.

SirHouloo:
Good afternoon gurus in the house, you are really doing a wonderful job here.
@oga UDZ and Oga Bellong
As per partner's qualification, can you claim 5points on that without being legally married yet?

Has she done skills assessment?