Mgbadike80:
I always love your contributions, you're one of those that have made this section so wonderful. Dalu rinne,

thank you sir God bless

Mgbadike80:
hmm, that's a wonderful suggestion but the wiring would be a bit difficult. we'll seek professional opinion on it.

The wiring is not difficult, the best way is to plan the wiring from the beginning and have a separate consumer unit for all the solar line, the wiring of lighting, socket on solar is the same way in normal PHCN/GEN, just make sure you have two sources of power(aolar and PHCN/gen) to all the solar distribution board from changeover switch by introducing bye-pass. when the inverter/solar is down you can easily change to PHCN/GEN.

topsy23:


The wiring is not difficult, the best way is to plan the wiring from the beginning and have a separate consumer unit for all the solar line, the wiring of lighting, socket on solar is the same way in normal PHCN/GEN, just make sure you have two sources of power(aolar and PHCN/gen) to all the solar distribution board from changeover switch by introducing bye-pass. when the inverter/solar is down you can easily change to PHCN/GEN.

thanks for sharing more information on this, it's a pleasure learning from you.

Plz I need an idea on how much scaffolding for standing water tanks can be made. The quotation I am getting is 130k to 150k. Plz help me confirm this

igwedehxy:
Plz I need an idea on how much scaffolding for standing water tanks can be made. The quotation I am getting is 130k to 150k. Plz help me confirm this

I guess u meant water tank stand?
What is d height & materials they are using?

Hi house. I need the service of a competent architect in Kwara state, ilorin precisely.

Thank you.

m4goodlife:
Hi house. I need the service of a competent architect in Kwara state, ilorin precisely.

Thank you.

you can contact me on


09056082348(call & whatsapp)
Raymondfubara@gmail.com

Rubbiish:

I guess u meant water tank stand?
What is d height & materials they are using?

They are using galvanized pipes. The height, let's say 6ft

raymondFirstborn:


you can contact me on

09056082348(call & whatsapp) Raymondfubara@gmail.com

Do u now stay in Kwara?

igwedehxy:

They are using galvanized pipes. The height, let's say 6ft

Are u sure the height is 6ft? Is d building a bungalow?

m4goodlife:
Hi house. I need the service of a competent architect in Kwara state, ilorin precisely.

Thank you.

Hello sir,
Good afternoon
I'm presently in ilorin Asa Dam Area along Nut ITF road.
My whatsapp number is 08100452977

Rubbiish:
Do u now stay in Kwara?

lol Good guy always catching everything

Rubbiish:
Do u now stay in Kwara?

I stay in Lagos
my cousin a graduate of architecture is serving(NYSC) in kwara

raymondFirstborn:


I stay in Lagos

my cousin a graduate of architecture is serving(NYSC) in kwara

Does that change you from being a Qauntity Surveyor to an Arcjhitect?
I know you closely as a good Surveyor.

Not showing clear identity of oneself won't make people and especially your Client to trust u.

Just saying#Let's take Note.

Always available for consultancy..
Engr. A.L Onakomaya..MNSE. RCOREN

Please how many tons of chippings is needed to deck a 254sqm duplex with two staircase. Thanks

ChiefSupplier55:
Solid doors for solid security of a solid home

Kindly inbox me the prices of the doors with the pictures to babs612000@yahoo.co.uk

Any one selling iron rod in Port Harcourt?

Need prices for

Y16mm, (per piece and per ton)
Y12mm, (per piece and Per ton)
Y 10mm, (per Piece and Per ton)

To be delivered in Woji Area of PH

igwedehxy:
Plz I need an idea on how much scaffolding for standing water tanks can be made. The quotation I am getting is 130k to 150k. Plz help me confirm this

This tank of mine was done for the downstairs. Slightly above 4meters. Used galvanized pipes. Plus casting everything cost about 110k (Stand was 90k cast 20k). This was mid 2016.

Talk2iyfy:
Please how many tons of chippings is needed to deck a 254sqm duplex with two staircase. Thanks

50 tons

Great minds

Rubbiish:

Are u sure the height is 6ft?
Is d building a bungalow?

Yes it's a bungalow

ceelog:

This tank of mine was done for the downstairs. Slightly above 4meters. Used galvanized pipes. Plus casting everything cost about 110k (Stand was 90k cast 20k). This was mid 2016.

Where did they cast?

igwedehxy:

Yes it's a bungalow

Then i fear 6ft maybe too low

ceelog:

This tank of mine was done for the downstairs. Slightly above 4meters. Used galvanized pipes. Plus casting everything cost about 110k (Stand was 90k cast 20k). This was mid 2016.

What is size of the galvanized pipes?

Good day all. I asked a question some days ago, even pleaded for answers but only got 1 response. Please is this thread for " man know man" only?
My question is in what order should the below listed be done?

Plumbing and electrical piping
Plastering
Fixing of window protectors and casement windows
Fixing of doors
tiles
Pop.

Thanks in advance to those that will reply me.

it can be in the following order;

Plumbing and electrical piping
Plastering
Fixing of window protectors and cassement windows
Pop.
tiles
Fixing of doors

Thanks

Looking for structural designs of Super structures, I can join your team. Give ideas, steel reinforcement design of commercial and Residential building call 07063154532

jadell:
it can be in the following order;

Plumbing and electrical piping
Plastering
Fixing of window protectors and cassement windows
Pop.
tiles
Fixing of doors
Thanks

Do Fixing of window protectors and cassement windows come before plastering sir?

cc: shelliz
The thread is not a man know man thread...lol

jadell:
it can be in the following order;

Plumbing and electrical piping
Plastering
Fixing of window protectors and cassement windows
Pop.
tiles
Fixing of doors

Thanks

plumbing and electrical first stage(piping)

burglary

fixing of main entrance and kitchen door

plastering

fixing window

pop

tiles

fixing of internal doors

topsy23:


plumbing and electrical first stage(piping)

burglary

fixing of main entrance and kitchen door

plastering

fixing window

pop

tiles

fixing of internal doors

Engr topsy longest time, how work, you make a good schedule of the work.
But to buttress your shcduled.

*Plumbing and electrical pipe.
*Fixing of any wooden doors frame/complete iron doors.
*Plastring( this should be done but window edges should not be done at this time.)
*Fixing of casement window [( if fixing before this time some bad bricklayer will messed up with the window no matter protection you put in it (nylon) ....from experience,
*At this point you can plaster/dress your windows edges to received burglar bars (if done after burglar bars it will be difficult for the meason to get perfect edges)
*Burglar bars.
* Pop ceiling
* Then floor finishings (marble, terazzo,tiles etc).
* Fixing of wooden door leave.